Descrizione del prodotto
Flat Flex Conveyor Belt Description
Flat flex conveyor belt is also called Z-Type bend conveyor belt, chocolate conveyor belt, ladder conveyor belt, interlaced wire conveyor belt or strip conveyor belt. It is an ideal wire conveyor belt for light products transfers and its large open area makes it the most efficient belt for many applications and processes.
Flat Flex Conveyor Belt Structure
Stainless Steel wire conveyor belt is made of SUS304 / 316 wire material, formed by mold pressing, normally driven by stainless steel or nylon sprockets, or by roller chains at 2 sides under special applications. The width is from 150mm to 6000mm. It can be used for both straight running and turning conveyors.
Flat flex conveyor belt can be supplied with PTFE coating to obtain a non-stick surface.
Common conveyor belt edge finish is Single Loop, Double Loops can reinforce the outside edge of the belt, and wire available for double loops edge is from 1.0mm to 1.2mm.
Flat flex conveyor belt is also known as trapezoidal mesh belt. Stainless steel flat flex mesh belt is made by mesh belt of top hardness through a special mold pressing, the edge can also be driven by the chain.
Stainless Steel Flat Flex Wire Belt have trusted performance especially in food industry. With up to 86% open surface area, flat flex conveyor belts promote maximum flow through and are the proven solution for major processors. Its design and clean in place capability make it even easier to keep your line hygienic, and with many wire diameters and pitches to choose from, you’ll be able to find the right belt for your application.
Flat flex conveyor belts are usually gear transmission belt, with good ventilation advantages, tension evenly, fine workmanship, the flat flex belts with a flexible rotation, good stability, High temperature, pressure resistance, corrosion resistance, long life and so on.
Flat flex conveyor belts are used with a single-layer structure, lighter, the use of sprocket drive. Large open area (opening 70-85%), often used in the lighter weight of the product cooling, frying, baking, drying, heating, decoration, wrapped powder and packaging equipment.
Advantage Of Stainless Steel Flat Flex Wire Mesh Conveyor Belt
1. Large opening area, maximum maximum Air-Flow Improve Efficiency
2. Fine workmanship, uniform pulling force, flexible running and good stability
3. High resistance to cold shrinkage, oxidation and fracture at negative temperature and high temperature
4. Smallest diameter end rolls and drive rolls
5. non-slip positive drive
6. Reasonable design, compact structure, with a large variety of pitch and wire diameters to choose
7. hygienic design,easy to clean,clean-in-place capability,long lasting
| 1) Large open area up to 86% | |
| 2) Small transfers | |
| 3) Non-slip positive drive | |
| 4) Very low belt mass for improved operating efficiency | |
| 5) Accurate tracking | |
| 6) Hygienic design, easy to clean, clean-in-place capability |
Typical materials Of Stainless Steel Flat Flex Wire Mesh Conveyor Belt
1) AISI 314 (1150°C)
2) SUS 310S (1090°C)
3) SUS 330 (1150°C)
4) SUS 304 (870°C)
5) Super alloy Cr20Ni80 (1250°C)
6) Electrical CZPT wire
7) SUS 321 (750°C)
8) SUS 410 (700°C)
9) SUS 430 (700°C)
10) Various metal materials as per your requirements
Flat Flex Wire Mesh Conveyor Belt Specifications
| Material | SUS304/SUS316/SUS310 ETC |
| Larghezza | 150 – 6000mm |
| Longitudinal Pitch | 4 – 20 mm or customized |
| Wire Diameter | 1.0 / 1.2 / 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.5 / 3.0 mm |
| Egde | Single Loop / Double Loops |
| Typical Applications | Drying, Enrobing, Battering, Cooking, Heating, Sieving ETC |
Typical applications Of Stainless Steel Flat Flex Wire Mesh Conveyor Belt
With single layer structure and light weight, it is suitable for many processes in which the product should have as little contact with the conveyor belt as possible, such as:
Food industry: often used in light weight products processing – frying, freezing, heating, cooling, cooking, drying, baking, coating, enrobing and sterilization for desserts, pizza, vegetables, bread, flour cakes, meat, fish, candy, potatoes, biscuits, chocolate, nuts, fruit, etc. Like chocolate enrobing, battering and breading, freezing for seafood processing, frying chickens, cooling wafer after coating, pizza baking.
Electronics industry: printed circuit board required minimum contact support, melting, sold or drying welding.
Caps making industry: drying for drop plastic
Others, like textiles, glass heat treatment, printing and dyeing, radio, scientific research applications.
Widely used in the electronics industry, the solidification of the circuit board, CZPT fusion, drying, reflow soldering. Cap industry of plastic drying; for chocolate, biscuits, fish baked, frozen and dry, with B network edge can be used in food industry chain drive.
Application industry: mainly used in printing and dyeing, radio, electronic, food machinery and research units.
Stainless steel 304 metal flat flex used conveyor wire mesh belt conveyor systems price for pizza oven chocolate enrober bakery
Flat flex conveyor belts are mainly used for quick-frozen food, fried food, sugar machine, chocolate coating with a variety of bread and pastry food baking conveyor line. Flat flex conveyor belts are used in the food industry for the production of the following products: small dessert, fish products, pizza, vegetables, bread, flour, cakes, meat, candy, potatoes, biscuits, chocolate, nuts and fruit.
1) Cooking
2) Heating
3) Cooling
4) Drying
5) Coating
6) Freezing
7) Enrobing
8) Frying
9) Baking
10) Dough rolling
11) Battering
12) Breading
13) Sterilization
14) Shrink-wrapping
15) Soldering
16) Shuttling
17) Turning
18) Side shifting
19) Collating
20) Crumbing
21) Searing
22) Glazing
23) Sieving
1.Funtions:
Flat flex conveyor belts are used in many industries.The belts have a light weight with single layer construction and are positively driven by sprockets. The belts have an open structure(70-85%open)and are frequently used in cooling, baking,draying heating,decorating,battering and packing machines for light products.
Flat flex belts are often used in conveyors for the food industry for the production of: snacks fish pizzas vegetables breadpastry -meat candy(small) potatoes biscuits chocolate nuts and fruits
2.Flat Flex Wire Mesh Conveyor Belt Features:
- Smooth surface with various shape.
- Long using life .
- Rust resistance .
- Corrosion resistance is strong.
- High strength, heat & erode- resistant.
- The capability of flexible and enduring.
- Permeability is well,not easy to out of shape.
3.Parameter:
Name:Flat flex conveyor belt
Materials:SS304,SS316
Pitch:4-20mm
Wire diameter :1-3mm
Overall width:100-4000mm
Special specifications are available.
It can work with sprocket ,and we also can supply sprocket for you.
Sprocket size: keyway /keyway depth/bore diameter/overall diameter.
Flat Flex Conveyor Belt Packing And Delivery
All Flat Flex Conveyor Belts are checked by our QC Department before delivering to our customers.
| Tipo: | NN500 |
|---|---|
| Materiale: | acciaio inossidabile |
| Materiale interno: | acciaio inossidabile |
| Caratteristica: | Resistente agli oli, agli acidi e agli alcali, agli strappi, al calore, al freddo e all'usura. |
| Resistenza alla trazione: | Forte |
| Short Pitch: | 5mm or Customized |
| Esempi: | US$ 500/Meter 1 Meter(Min.Order) | |
|---|
| Personalizzazione: | Disponibile | Richiesta personalizzata |
|---|
Quali sono i requisiti di manutenzione per le ruote dentate delle scale per garantirne il corretto funzionamento?
La corretta manutenzione delle ruote dentate delle scale di trasporto è essenziale per garantire un funzionamento regolare, prolungarne la durata e prevenire guasti imprevisti nei sistemi di trasporto. Ecco i requisiti di manutenzione per le ruote dentate delle scale di trasporto:
- Ispezione periodica: Eseguire ispezioni visive periodiche delle ruote dentate della scala per verificare la presenza di segni di usura, danni o deformazioni. Ispezionare i denti della ruota dentata, i traversi e la struttura generale per individuare eventuali anomalie.
- Lubrificazione: Applicare regolarmente il lubrificante appropriato alla ruota dentata della scala e alla catena del trasportatore. Una lubrificazione adeguata riduce al minimo l'attrito, limita l'usura e garantisce un movimento fluido e una trasmissione di potenza ottimale.
- Regolazione della tensione: Mantenere la corretta tensione della catena del trasportatore per evitare un'usura eccessiva dei denti della ruota dentata e delle maglie della catena. Una tensione adeguata contribuisce a mantenere un posizionamento preciso e previene lo slittamento della catena.
- Allineamento della catena: Assicurarsi che la catena del trasportatore sia correttamente allineata con la ruota dentata. Un disallineamento può causare un'usura irregolare, un aumento dell'attrito e ridurre la durata della ruota dentata e della catena.
- Pulizia: Mantieni puliti i pignoni della catena e l'area circostante da detriti, sporco e contaminanti. Le particelle estranee possono causare l'inceppamento della catena, un'usura accelerata e compromettere le prestazioni dei pignoni.
- Sostituire i pignoni usurati: Controllare regolarmente l'usura dei denti della ruota dentata della catena. Se i denti della ruota dentata sono significativamente usurati, scheggiati o presentano un profilo a uncino, sostituire tempestivamente la ruota dentata per mantenere un corretto innesto della catena e prevenire rotture della stessa.
- Controllare l'usura della catena: Ispezionare regolarmente la catena del trasportatore per individuare eventuali segni di usura, allungamento o stiramento. Sostituire la catena se ha superato la sua durata di vita consigliata, poiché una catena usurata può accelerare l'usura delle ruote dentate.
- Segnala rumori o vibrazioni insolite: Indagare e risolvere tempestivamente qualsiasi rumore o vibrazione insolita nel sistema di trasporto. Rumori anomali possono indicare problemi con le ruote dentate della scala o altri componenti che richiedono attenzione.
- Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.
By adhering to these maintenance requirements, conveyor system operators can ensure the smooth operation and reliable performance of ladder sprockets. Regular maintenance not only extends the sprocket’s service life but also contributes to the overall efficiency and productivity of the conveyor system.
Le pratiche di manutenzione proattiva riducono il rischio di fermi macchina imprevisti, danni alle apparecchiature e riparazioni costose, rappresentando quindi un investimento vantaggioso per qualsiasi attività industriale che si affidi a sistemi di trasporto con ruote dentate a scala.
Quali sono le capacità di carico delle diverse configurazioni di pignoni a scala?
La capacità di carico delle ruote dentate a scala varia a seconda del design, del materiale e delle dimensioni. È fondamentale considerare diversi fattori quando si determina la capacità di carico di una configurazione di ruote dentate a scala:
- Materiale: Il materiale utilizzato nella costruzione della ruota dentata a scala influenza in modo significativo la sua capacità di carico. Le ruote dentate in acciaio sono note per la loro elevata resistenza e capacità di carico, mentre le materie plastiche tecniche ad alta resistenza sono adatte a carichi più leggeri e ad applicazioni specifiche nell'industria alimentare.
- Dimensioni e numero dei denti: In generale, le ruote dentate a scala con un maggior numero di denti offrono una superficie di contatto più ampia con la catena, distribuendo il carico in modo più uniforme e aumentando la capacità di carico. Le ruote dentate più grandi, con diametri maggiori, possono inoltre sopportare carichi superiori grazie alla loro maggiore superficie di contatto.
- Configurazione dell'hub: La configurazione del mozzo della ruota dentata a scala può influenzare la sua capacità di carico. Le ruote dentate con mozzi robusti e resistenti possono sopportare carichi maggiori rispetto a quelle con mozzi standard o leggeri.
- Personalizzazione: Alcuni pignoni per scale possono essere personalizzati per aumentarne la capacità di carico in base ad applicazioni specifiche. Modifiche di progettazione personalizzate, strutture di supporto aggiuntive o materiali ad alta resistenza possono essere impiegati per soddisfare i requisiti di utilizzo gravoso.
- Applicazione e ambiente: The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
- Standard di settore: Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.
It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.
La manutenzione e l'ispezione periodiche delle ruote dentate a scala sono essenziali per individuare segni di usura o danni che possono compromettere la capacità di carico. Scegliendo la configurazione di ruote dentate a scala più adatta e garantendo una manutenzione adeguata, è possibile ottimizzare la capacità di carico e l'affidabilità del sistema di trasporto.
What is a Ladder Sprocket, and How is it Different from Other Types of Sprockets?
A ladder sprocket is a specific type of sprocket used in chain drive systems. It is also known as a carrier sprocket or cage sprocket. The ladder sprocket is different from other types of sprockets due to its unique design and function:
- Design: A ladder sprocket consists of two parallel plates or bars connected by cross members, resembling a ladder. The cross members hold the chain links in place, guiding them along the sprocket’s path.
- Function: The primary function of a ladder sprocket is to guide the chain and prevent it from derailing or skipping during operation. The chain links rest on the cross members, ensuring proper engagement with the sprocket teeth.
- Chain Support: Unlike traditional sprockets, where the chain wraps around the sprocket teeth, a ladder sprocket provides continuous support to the chain by holding each link securely within the cross members.
- Low Noise and Vibration: The design of the ladder sprocket results in reduced noise and vibration during operation, making it suitable for applications where noise reduction is important.
- Applicazioni ad alta velocità: Ladder sprockets are commonly used in high-speed applications, such as conveyor systems, where maintaining chain stability and precise motion is critical.
- Accurate Positioning: Due to the continuous support of the chain, ladder sprockets provide accurate positioning and minimize chain whip or slack, ensuring consistent power transmission.
It’s important to note that ladder sprockets are specific to certain chain types, and their design must match the corresponding chain pitch and configuration for proper operation.
While ladder sprockets offer advantages in certain applications, they may not be suitable for all chain drive systems. Other types of sprockets, such as standard toothed sprockets or segmented sprockets, are more common and versatile for a wide range of power transmission applications.
When considering the use of ladder sprockets, it is crucial to understand the specific requirements of the chain drive system and consult with manufacturers or engineers to ensure the correct selection and compatibility for optimal performance.
editor by CX 2023-10-19