What pitch tolerance does your case-packer sprocket actually hold — and is that tolerance causing the intermittent case jams that slow your line to 85% OEE? On servo-indexed case packers running 140+ cartons per minute, the sprocket tooth profile acts as the final mechanical timing element. If cumulative pitch error exceeds 0.05 mm, the dwell-and-advance cycle drifts out of phase with the case-loading robot — and product jams against the infeed guide every 200-400 cycles.
Ever-power Australia Ladder Sprocket Co., Ltd. machines case-packer ladder sprockets in POM and SS304 to cumulative pitch tolerance within 0.03 mm — matching the positional repeatability of modern servo actuators. We supply packaging-line integrators and FMCG manufacturers across Melbourne, Geelong, Adelaide, Townsville and Perth.
| パラメータ | 仕様 | カスタムレンジ |
|---|---|---|
| 材料 | POM / SS304 | UHMW-PE, PEEK, SS316L |
| Pitch Tolerance | Within 0.03 mm cumulative | 0.02 mm on request |
| Pitch | 9.525-25.4 mm | 6.35-38.1 mm |
| Teeth | 12-48 | 8-72 |
| Bore | 12-60 mm | 8-80 mm |
| ハブ | Type B keyed | Split, stainless insert |
| Noise | 67-71 dB(A) POM | <60 dB(A) UHMW-PE |
| 硬度 | Shore D 85 (POM) | — |
| Chain | ANSI 35-60, tab chains | Modular belt |
| Speed | 140+ cartons/min indexing | 200+/min with PEEK |
| Lubrication | Self-lubricating | — |
| Inertia | 80% less than steel | — |
| Concentricity | TIR < 0.02 mm | — |
| FDA | Compatible | Full 21 CFR |
| Temp | -40 to 100C (POM) | — |
| 海岸線 | Simplex | Duplex |
| キーウェイ | DIN 6885 | カスタム |
| セットスクリュー | A2ステンレス鋼 | — |
| リードタイム | 7-10 business days | Expedite |
| 最小注文数量 | 1個 | — |
The critical metric for case-packer sprockets is case registration accuracy at production speed:
| Metric | Generic Steel | Ever-power POM |
|---|---|---|
| Registration offset at 140/min | 1.5-3.0 mm drift | < 0.5 mm |
| Case jam frequency | Every 200-400 cycles | < 1 per 10,000 cycles |
| OEE impact | 82-87% | 94-97% |
| Noise at operator position | 80-84 dB(A) | 67-71 dB(A) |
| Lubrication contamination risk | Yes (oil transfer to carton) | Zero |
In a servo case packer, the sprocket controls cam-action indexing — a repeating cycle of rapid advance, dwell (pause during case loading), and advance again. The tooth geometry directly determines the dwell duration and transition smoothness. Our involute tooth profile provides a gradual engagement ramp during the advance phase, eliminating the impact shock that causes chain vibration on flat-profile teeth. During the dwell phase, the flat tooth root provides a stable seating platform that holds the chain stationary within 0.1 mm of target position. This precision timing is what prevents the case-to-robot mis-registration that triggers jams on less accurately machined sprockets.
Chain: ANSI 35, 40 and 50 roller chains (stainless or carbon), Rexnord TableTop 880/882, Intralox Series 400 tab chains for case packer OEM platforms from Schneider Electric, Bosch Rexroth, Krones, and local Australian integrators.
Equipment brands listed for compatibility reference; no trademark affiliation.
Determine your case-packer sprocket using this parameter comparison:
| Packer Speed | Carton Weight | Chain | Sprocket Material | Pitch Tol. |
|---|---|---|---|---|
| < 80/min | < 5 kg | ANSI 35 | POM or SS304 | 0.05 mm |
| 80-140/min | 5-15 kg | ANSI 40 | POM | 0.03 mm |
| 140-200/min | < 10 kg | ANSI 40 | POM (high-grade) | 0.02 mm |
| 200+/min | < 5 kg | ANSI 35 | ピーク | 0.02 mm |
ステップ1： Lock out all servo axes. Case packers have multiple moving axes — confirm all are mechanically braked.
ステップ2： Release automatic chain tensioner. Break chain at master link.
ステップ3： Loosen set screws. POM sprockets slide off with finger pressure — no puller required.
ステップ4： Mount replacement. Insert key, tighten set screws to specified torque. Use stainless keyed insert if high-torque application.
Step 5: Re-thread chain. Set tension to 2% sag. Run at 50% speed and verify case registration via PLC diagnostic before full production.
症状： Intermittent case jams at infeed guide, occurring every 200-400 cartons. Robot pick-and-place cycle completes but carton is not in registration when flaps close.
Root Cause: Cumulative pitch error on worn sprocket causes chain timing drift. After 50,000+ index cycles, tooth wear creates 0.08-0.12 mm pitch growth that compounds into 1.5-3.0 mm positional offset at the case-loading station.
解決： Replace with Ever-power POM sprocket machined to within 0.03 mm cumulative pitch tolerance. POM maintains this accuracy through 500,000+ cycles. Additionally, inspect chain for elongation — replace if pitch stretch exceeds 1.0% of nominal.
★★★★★ — Dairy Product Packer, Melbourne VIC
Application: 6-axis robot case packer for UHT milk cartons, 145/min. Automation lead Scott Murray reported: “Case jams dropped from 12 per shift to less than 1 per day after installing Ever-power POM sprockets. OEE went from 86% to 95%. The precision pitch tolerance made an immediate difference.”
★★★★★ — Pet Food Manufacturer, Geelong VIC
Application: Gravity case erector with servo-driven bottom-flap fold, ANSI 40 chain. Packaging engineer Hayley Byrne stated: “The old steel sprockets transferred lubricant onto our premium-printed cartons. POM eliminated contamination. Our retail customer complaints dropped to zero.”
★★★★★ — Confectionery Producer, Adelaide SA
Application: High-speed multipack wrapper infeed, 180 bars/min. Maintenance supervisor Tony Papas noted: “Registration accuracy improved from 2.3 mm average drift to 0.4 mm. Wrapper seal quality improved because product positioning is now consistent.”
★★★★ — Canned Goods Packer, Townsville QLD
Application: Standard drop-case packer, 90 cartons/min. Procurement officer Lisa Cheng commented: “Reliable quality, correct dimensions, delivered on schedule to regional Queensland. Good value for a precision component.”
★★★★★ — Wine & Spirits Bottler, Perth WA
Application: Bottle case-packer with servo partition inserter. Line manager David Kalogerakis explained: “The low inertia of POM lets our partition-insert servo settle 30% faster. We eliminated the micro-delay that was causing occasional bottle tipping at high speed.”
🔗Low-Backlash Table-Top Chains
Precision tab and table-top chains matched to POM sprocket pitch for zero-backlash case-packer indexing.
⚙Stainless Keyed Bore Inserts
Press-fit metallic inserts for high-torque polymer sprocket applications.
⚪Servo Shaft Couplings
Zero-backlash bellows couplings for direct servo-to-sprocket connection.
Manufactured to ISO 606, ANSI B29.1. Polymer resins FDA-compliant, REACH-registered. ISO 9001:2015, SGS/TUV audited.
We are Ever-power Australia Ladder Sprocket Co., Ltd. Our case-packer sprocket programme is built on a single obsession: pitch accuracy. We invested in temperature-controlled CNC enclosures and diamond-polished carbide tooling specifically to hold the 0.03 mm cumulative tolerance that high-speed packaging demands. Over 20 years supplying Australian FMCG packaging lines — we understand that every jam costs money.
Specify your packer speed, carton weight, chain type and servo shaft diameter. We will confirm the optimal POM grade and pitch tolerance — quoted same business day. Contact us at sales@laddersprockets.top または当社の お問い合わせページ.
Ladder Sprockets for Combine Harvester Elevator Mechanisms OverviewWhen the total cost of sprocket ownership is…