Product Description
Agricultural Chain Sprocket For Combine Harvest
Characteristic
Choosing a chain sprocket for your combine can be an overwhelming task. There are many things to consider, including the Div. dividers, wear points, and RPM measurement. Fortunately, this article can help you make the right choice. We’ll cover the important factors to look for in a chain sprocket and why they’re important. Buying a new chain sprocket for your combine harvest is an investment that will pay off.
Island design
An island design chain spiket for a combine harvester is a highly useful agricultural product that ensures proper transmission of torque from the engine to the working units. The chain spiket is made of steel and cast iron and features a complex spatial form with a central hole, fastening elements, and special coating. Its durability is increased by its easy removal and replacement process. It is compatible with CR and CH Series combine harvesters.
RPM measurement
The rate of work and quality of the TX36 are compared in the following table. Operator safety, suitability of the operator manual, and mechanical breakdowns are also compared in this table. In addition, a side slope test was performed at 5deg (8%) and 8.8% to measure the combine’s performance on non-level surfaces. The results of these tests will help you determine whether the combine harvester is a good fit for your operations.
The operator’s cab on the TX36 is positioned on the combine’s body ahead of the grain tank. The ladder is narrow and may be difficult to climb for some operators. Operators should double-check their adjustments regularly to make sure they are getting the best results. Check the CZPT conditions as well. If the CZPT is still green beans, you should postpone harvesting until it has risen to at least 13% moisture content. For this, refer to the operator’s manual, which should include initial settings for a particular crop.
Wear points
If you’re having trouble with your grain elevator, there are some easy ways to improve its performance. For 1 thing, you can replace the worn and damaged roller chains. This simple change can save you time and money over the long run. Secondly, you can improve your harvest efficiency by avoiding unnecessary downtime. These 2 steps will increase the efficiency of your combine.So, keep reading to learn how to improve your grain elevator’s performance.
In-cab adjustments
In-cab adjustments on a Combine Harvest chain spiket are a great way to tweak the harvest speed and adjust the threshing speeds to maximize yield and minimize damage to crops. While pocket-type setting guides are convenient, it’s also beneficial to consult the manual for more detailed information. For example, the manual will tell you the proper speed for threshing a field, while the manual will explain how to set the threshing speed to minimize grain damage and boost harvest speed.
It’s important to note that yields can vary widely from field to field, so it’s important to monitor the engine load when
adjusting threshing speeds.In-cab adjustments for a Combine Harvest chain spiket should be performed during regular maintenance to minimize damage to crops. To prevent damage to crops, adjust the threshing speed as necessary to ensure that CZPT is not cracked. Broken cobs or too much residue can be signs of excessive threshing. Threshing speed should begin at the top of the operating manual rpm,and then be monitored to ensure the desired amount of damage is not occurring.
Company Information
| Type: | Agricultural |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
| Material: | Iron |
| Power Source: | Electricity |
| Weight: | 1.44kg |
| After-sales Service: | Installation Guide 3-Year Warranty |
What are the Maintenance Requirements for Ladder Sprockets to Ensure Smooth Operation?
Maintaining ladder sprockets is essential to ensure smooth operation, prolong their service life, and prevent unexpected failures in conveyor systems. Here are the maintenance requirements for ladder sprockets:
- Regular Inspection: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Inspect the sprocket teeth, cross members, and overall structure for any abnormalities.
- Lubrication: Apply the appropriate lubricant to the ladder sprocket and the conveyor chain regularly. Proper lubrication minimizes friction, reduces wear, and ensures smooth motion and power transmission.
- Tension Adjustment: Maintain the correct tension in the conveyor chain to prevent excessive wear on the sprocket teeth and chain links. Proper tensioning helps maintain accurate positioning and prevents chain slippage.
- Chain Alignment: Ensure the conveyor chain is properly aligned with the ladder sprocket. Misalignment can cause uneven wear, increased friction, and reduce sprocket and chain life.
- Cleanliness: Keep the ladder sprockets and the surrounding area clean from debris, dirt, and contaminants. Foreign particles can cause chain jamming, accelerated wear, and affect sprocket performance.
- Replace Worn Sprockets: Monitor the wear of the ladder sprocket teeth regularly. If the sprocket teeth are significantly worn, chipped, or have hook-shaped profiles, replace the sprocket promptly to maintain proper chain engagement and prevent chain failure.
- Inspect Chain Wear: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. Replace the chain if it is beyond its recommended service life, as a worn chain can accelerate sprocket wear.
- Address Unusual Noises or Vibrations: Investigate and address any unusual noises or vibrations in the conveyor system promptly. Unusual sounds may indicate issues with the ladder sprockets or other components that require attention.
- Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.
By adhering to these maintenance requirements, conveyor system operators can ensure the smooth operation and reliable performance of ladder sprockets. Regular maintenance not only extends the sprocket’s service life but also contributes to the overall efficiency and productivity of the conveyor system.
Proactive maintenance practices reduce the risk of unexpected downtime, equipment damage, and costly repairs, making it a worthwhile investment for any industrial operation that relies on conveyor systems with ladder sprockets.
What are the Load-Carrying Capacities of Different Ladder Sprocket Configurations?
The load-carrying capacity of ladder sprockets varies depending on their design, material, and size. It is essential to consider several factors when determining the load-carrying capacity of a ladder sprocket configuration:
- Material: The material used in the construction of the ladder sprocket significantly influences its load-carrying capacity. Steel sprockets are known for their high strength and load-bearing capabilities, while high-strength engineering plastics are suitable for lighter loads and specific food processing applications.
- Size and Number of Teeth: Generally, ladder sprockets with more teeth provide a larger contact area with the chain, distributing the load more evenly and increasing the load-carrying capacity. Larger sprockets, with bigger diameters, can also handle higher loads due to their increased surface area.
- Hub Configuration: The hub configuration of the ladder sprocket can affect its load-carrying capacity. Sprockets with robust and sturdy hubs can handle higher loads compared to sprockets with standard or lightweight hubs.
- Customization: Some ladder sprockets can be customized to enhance their load-carrying capacity for specific applications. Custom design modifications, additional support structures, or higher-strength materials can be employed to meet heavy-duty requirements.
- Application and Environment: The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
- Industry Standards: Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.
It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.
Regular maintenance and inspection of the ladder sprockets are essential to identify signs of wear or damage that can affect the load-carrying capacity. By selecting the right ladder sprocket configuration and ensuring proper maintenance, you can optimize the load-carrying capacity and reliability of your conveyor system.
How does a Ladder Sprocket Interact with the Conveyor Chain or Belt?
A ladder sprocket interacts with the conveyor chain or belt in a unique and precise manner, providing continuous support and guidance to facilitate smooth and reliable motion in conveyor systems. Here’s how a ladder sprocket interacts with the chain or belt:
- Continuous Support: The ladder sprocket’s design consists of two parallel plates or bars connected by cross members, resembling a ladder. The chain links rest securely within the gaps between the cross members, providing continuous support throughout the sprocket’s rotation.
- Engagement of Chain Links: As the conveyor chain moves along the conveyor path, it wraps around the ladder sprocket. The chain links fit into the gaps between the cross members, ensuring each link is held securely within the ladder sprocket’s structure.
- Guidance: The ladder sprocket acts as a guide for the conveyor chain, preventing the chain from derailing or skipping off the sprocket during operation. The chain links remain confined within the cross members, maintaining correct alignment with the sprocket teeth.
- Preventing Slippage: The ladder sprocket’s continuous support of each chain link minimizes chain slippage, ensuring accurate power transmission between the sprocket and the conveyor chain.
- Accurate Motion: The ladder sprocket’s design provides consistent positioning and tension on the chain, contributing to smooth and precise motion. This is crucial for conveyor systems that require accurate material handling.
- Reduced Noise and Vibration: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration levels during operation, promoting a quieter and more stable conveyor system.
- High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems, as they can maintain chain stability and precise motion even at elevated speeds.
The interaction between the ladder sprocket and the conveyor chain or belt ensures that the chain remains properly engaged with the sprocket teeth throughout its movement. The ladder sprocket’s continuous support and guidance contribute to smooth material flow, reduced wear, and enhanced overall conveyor system performance.
When incorporating ladder sprockets in conveyor systems, it is vital to ensure proper sprocket and chain alignment, adequate lubrication, and periodic maintenance to maximize the system’s efficiency and longevity.
editor by CX 2023-10-02
China manufacturer #80 C-Hub Roller Chain Sprocket ANSI Certified Standard
Product Description
Product Description
80 Chain Sprockets are manufactured in accordance with ANSI B29.1 Standards and are made for 1″ pitch 80 and heavy-duty 80H roller chains. Being manufactured to The American National Standards Institutes dimensions means that these sprockets directly interchange with other manufacturers. Up to 30-teeth, our 80 sprockets feature hardened teeth for a dynamic performance factor increase and increased sprocket longevity. Out standard steel sprockets utilize a black-oxide coating for added corrosion protection, they are also manufactured from a premium high-strength grade of mild steel for an additional increase in sprocket life.
Product Parameters
| Sprocket Size | Type | Tooth Count | Outside Diameter | Stock Bore | Recommend Max. Bore | Hub Diameter | Length Thru Bore | Weight (LBS) |
|---|---|---|---|---|---|---|---|---|
| 80C11 | 11 | C | 4.571 | 1” | 1-5/8″ | 2-29/32” | 2-3/8″ | 3.87 |
| 80C12 | 12 | C | 4.330 | 1” | 1-7/8″ | 3-1/8” | 2-3/8″ | 4.31 |
| 80C13 | 13 | C | 4.660 | 1” | 2″ | 3-1/64” | 2-3/8″ | 5.32 |
| 80C14 | 14 | C | 4.980 | 1” | 2-1/4″ | 3-11/32” | 2-3/8″ | 6.44 |
| 80C15 | 15 | C | 5.300 | 1” | 2-1/2″ | 3-13/16” | 2-3/8″ | 7.75 |
| 80C16 | 16 | C | 5.630 | 1” | 2-3/4″ | 4” | 2-3/8″ | 8.81 |
| 80C70 | 70 | C | 22.870 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 75.7 |
| 80C72 | 72 | C | 23.500 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 81.4 |
| 80C76 | 76 | C | 24.780 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 87.8 |
| 80C80 | 80 | C | 26.050 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 89.9 |
| 80C84 | 84 | C | 27.330 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 99.2 |
| 80C90 | 90 | C | 29.240 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 31/2″ | 106.0 |
| 80C96 | 96 | C | 31.150 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 117.0 |
| 80C112 | 112 | C | 36.240 | 1-1/2″ | 4-1/4″ | 6-1/4″ | 3-1/2″ | 154.0 |
Company Profile
Services we can provide
1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT
2.Quote:We will give you the best price within 24 hours
3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service
4.Processing and customization:Short delivery time
Related products:
Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Cut Gear |
| Toothed Portion Shape: | Bevel Wheel |
| Material: | Steel |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?
When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:
- Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
- Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
- Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
- Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
- Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
- Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
- Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.
It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.
Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.
Can Ladder Sprockets be Used in Material Handling and Logistics Applications?
Yes, ladder sprockets can be used in material handling and logistics applications, and they play a crucial role in various conveyor systems used for material transportation and distribution. Ladder sprockets are well-suited for these applications due to their design and load-carrying capacity. Here’s how ladder sprockets are utilized in material handling and logistics:
- Conveyor Systems: Ladder sprockets are commonly used in conveyor systems to drive and guide the conveyor chain or belt. These systems efficiently move materials along assembly lines, warehouses, distribution centers, and other logistics facilities.
- Heavy Loads: Material handling and logistics applications often involve the transportation of heavy loads. Ladder sprockets, especially those made from durable materials like steel, can handle the high loads and provide reliable power transmission.
- Precision and Efficiency: Ladder sprockets, when correctly sized and aligned, offer precise motion control and efficient power transmission. They ensure that materials are transported smoothly and accurately along the conveyor path.
- Customization: In material handling systems with specific requirements, ladder sprockets can be customized to fit unique conveyor configurations, load-carrying needs, and environmental conditions.
- Various Industries: Material handling and logistics applications are found in diverse industries, including manufacturing, automotive, e-commerce, food and beverage, pharmaceuticals, and more. Ladder sprockets are adaptable and commonly employed in these sectors.
- Speed and Throughput: Ladder sprockets, combined with appropriate conveyor designs, can accommodate different speeds and throughput rates, allowing efficient handling of materials in high-volume environments.
It is essential to select ladder sprockets that meet the specific requirements of material handling and logistics applications. Factors such as load capacity, conveyor speed, operating environment, and material compatibility must be considered when choosing ladder sprockets for these systems.
Regular maintenance and inspection are vital to ensure the smooth operation of ladder sprockets in material handling and logistics applications. Proper lubrication, alignment, and timely replacement of worn or damaged sprockets are necessary to maintain the conveyor system’s efficiency and prevent unexpected downtime.
Overall, ladder sprockets are valuable components in material handling and logistics, contributing to the seamless flow of materials, optimizing productivity, and supporting the efficiency of various industries.
What are the Advantages of Using Ladder Sprockets over Other Sprocket Designs?
Ladder sprockets offer several advantages over other sprocket designs, making them a preferred choice in certain applications where specific benefits are required. Here are the advantages of using ladder sprockets:
- Continuous Chain Support: Ladder sprockets provide continuous support to the conveyor chain or belt. The chain links rest securely within the gaps of the ladder sprocket, ensuring reliable engagement and reducing the risk of chain derailment or slippage.
- Smooth and Quiet Operation: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration during operation. This makes ladder sprockets suitable for applications where noise reduction is important.
- High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems due to their ability to maintain chain stability and accurate motion even at elevated speeds.
- Precise Motion Control: The ladder sprocket’s design provides continuous support and guidance to the chain, ensuring accurate positioning and minimizing chain whip or slack. This is crucial for applications that require precise motion control.
- Low Maintenance: Due to the reduced chain wear and improved engagement, ladder sprockets may require less frequent maintenance compared to other sprocket designs, leading to lower overall maintenance costs.
- Compatibility: Ladder sprockets are compatible with various chain types, providing flexibility in conveyor system design and offering options for different industrial applications.
- Reduced Chain Wear: The continuous support and guidance provided by ladder sprockets result in reduced chain wear, extending the service life of the conveyor chain and sprocket.
- Prevents Chain Jumping: The ladder sprocket’s design prevents chain jumping or skipping, ensuring continuous and reliable power transmission between the sprocket and the conveyor chain.
- Enhanced Safety: With reduced chain slippage and improved engagement, ladder sprockets contribute to a safer conveyor system operation, minimizing the risk of unexpected failures.
It’s important to note that ladder sprockets may not be suitable for all applications, and the choice of sprocket design depends on specific requirements and operating conditions. Traditional toothed sprockets or other specialized sprocket designs may be more appropriate in certain scenarios.
When considering the use of ladder sprockets, it is essential to assess the application needs, conveyor system requirements, and consult with experts to make an informed decision for optimal performance and efficiency.
editor by CX 2023-08-09
China manufacturer 13070-0V030 Intake and Exhaust Engine Variable Valve Timing Sprocket Gear for CZPT Camry Highlander RAV4 Sienna Venza Scion with high quality
Model: VENZA (_V1_), CAMRY Saloon (_V5_), Factory Price triflex coupling high flexible Good Quality DL type rubber coupling easy disassembly flexible universal coupling RAV 4 IV (_A4_)
Year: 2011-, 2008-, ML7 plum CZPT type elastic shaft coupling High Quality power transmission Coupling Manufacturer customized 2012-
Engine: 2.5 (ASV50_), 2.7 4WD (AGV15_), Z10 type keyless shaft hub locking device Factory Price manufacturer precision high power transmission power lock 2.7 (AGV10_), 2.5, Finetoo Trendy Multiple Colors Butterfly Necklace Thin Chain Colorful Pendant Necklace for Women Jewelry 2.5 4WD
OE NO.: 13070-0V030
Car Fitment: Toyota
Reference NO.: TV-0038
Size: standard, OEM Standard Size
Warranty: 1 year
Car Model: for TOYOTA
MOQ: 1 pcs
OEM NO: Support All OEM NO Customization
Car Make: For Toyota
Key words: timing gear camshaft For Nissan
Type: VVT Intake camshaft Sprocket
Quality: 100% tested
Item Name: timing gear camshaft adjuster 13571-8J02A
OEM: 13070-0V030
Packaging Details: safe package
Port: HangZhou HangZhou Hong Kong oversea warehouse
Recommend Products Products Description
| Product Name | 13070-0V030 Intake and Exhaust Engine Variable Valve Timing Sprocket Gear for CZPT Camry Highlander RAV4 Sienna Venza Scion |
| Car Make | For Toyota |
| Type | VVT Intake camshaft Sprocket |
| OEM NO | 13070-0V030 |
| Quality | 100% Tested |
What you need to know about sprockets
If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
Various types of sprockets
There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
teeth
There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.
Hole
Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
asphalt
Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.
editor by Cx 2023-07-13
China Good quality Agriculture Machinery Parts Roller Chain Sprocket manufacturer
Product Description
Yuchen power tramsmission offer all the sprocket
Product Description
1. American Standard, European Standard, Japanese Standard
2. Pilot bore, finished bore, taper bore and special bore available
3. Bright surface and high precision
4. Advanced heat treatment and surface treatment crafts
5. Better quality and competitive price.
6. Material C45(1045), low carbon steel, 40Cr, 20CrMnTi, stainless steel such as SS316L, SS316, SS304, SS420, copper etc. available
7. Standard sea worthy package to Europe and American
8. High speed digital gear hobbing machines to guarantee the teeths quality
9. Corrosion resistance treatment available
10. Control on tolerance and easy to install
11. Good material and good treatment to make sure long life span
12. OEM/ODM welcome
Product show
Manufacture process
| Business type | Manufacturer & Exporter |
| Main export market | Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa |
| Material | C45, low carbon steel, 40Cr, cast iron, stainless steel, copper etc |
| Manufacturing method | Forged and then machined, hobbed, if need can also weld |
| Heat treatment | High frequency quenching and so on |
| Surface treatment | Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on |
| Model | Type A & Type B, Single, Double, Triple – 35B10-80,40B9-90,50B9-90,60B9-90,80B9-90,100B9-90,120B9-80,140B10-60,160B10-60;06B10-125,08B9-125,10B9-125,12B9-125,16B9-125,20B9-114,24B9-90,28B9-76,32B9-76, and other sprocket to fit with conveyor chain, transmission chain |
| Packing | Plywood Case/Pallet |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment 30%TT in advance. 70% T/T before shippment
| Transport Package: | Non-Fumigation |
|---|---|
| Specification: | 10Bb 20T |
| Trademark: | GS |
| Origin: | China |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to choose a sprocket in CZPT
Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.
Pitch sprocket
When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.
three sprockets
Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
Cone lock sprocket
Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.
Quick release sprocket
There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
Irregular sprocket
Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
editor by CX 2023-07-13
China manufacturer 11367500032 Camshaft Sprocket Gear auto spare parts for 3 E46 E90 318i 316i 5 E60 520i Z4 E85 X1X3 04-09 with high quality
OE NO.: 113675 45# steel non-standard customized we can pack the goods in your branded boxes after getting your authorization letters.Q2. What is your terms of payment?A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.Q3. What is your terms of delivery?A: EXW, FOB, CFR, WSS Telescopic Universal Joints CIF, DDU.Q4. How about your delivery time?A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items andthe quantity of your order.Q5. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.Q6. What is your sample policy?A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.When customer place order, Fashion Custom Gold Plated Engraved Signature Bracelet Custom Women Stainless steel jewelry Bar Hook open bangle bracelet we will return the sample cost.Q7: How do you make our business long-term and good relationship?A:1. We keep good quality and competitive price to ensure our customers benefit.
What you need to know about sprockets
If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
Various types of sprockets
There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
teeth
There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.
Hole
Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
asphalt
Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.
editor by Cx 2023-07-12
China 1045# steel high quality motorcycle linked chain sprockets for bajaj pulsar motorcycle from China manufacturer app sprocket
Variety: Motorcycle Sprocket
Product Variety: DJ20150520005
color: white ,black,brass, as your want
content: A3 metal forty five steel
certificate: ISO9001/2000
thinkness: 6.0m-7.0m
area remedy: Zinc plating ,Chrome plating,printing
hardness: 40-55HRC
bodyweight: .95kgs
Teeth No: 13-17T 34-60T
Standard or Non standard: regular
high quality class: A-course
Packaging Specifics: Blister card, slide blister, plastic baggage ,carton ,bubble bag,color box.as you require
Port: ZheJiang
1045# steel large good quality bike joined chain sprockets for bajaj pulsar motorbike from China manufacturer
Solution Introduction
1.Motorbike sprocket type is 420,428,520,530 and so on
2.Content have A3 and forty five# steel
3.Thickness is 6.8~7.
four.Surface area technologies is polish, sand plating ,CNC line and so on
5.Surface treatment is zinc plating ,chrome plating,nickle plating
6.Excess weight for 1 set is about .8kg
7.Tooth quantity arrange 13t~17t,34t~60t
| A | A50, A80, A100, AG100, AK100, AK125SL, ALFA-FIZR, AX100, AX115 | |
| B | BAJAJ, BEST125, BIZ100, BIZ125, BOXER, BROS125, BROS150 | |
| C | C50, C70, C90, C100, C100-BIZ, CALIBER, CALIBER115, CB100, CB125, CB125T, CB250N, CB400, CBF150, CBR, CBR250, CBR400, CBX150, CBX200, CBX250, CBZ160, CD70, CD80, CD100, CD125, CF50, CFR250, CFR450, CG125, CG150, CG125FAN, CN125, CRUX, CRX100, CRYTPON, CT100,CUB7090, CXR100 | |
| D | DAELIM, Personalized wlentines day present style jewellery pendant enjoy magnet pair coronary heart necklaces for girls DAX70, DT100, DT50, DT125, DT125T, DT125K, DT125R, DT150,DT175,DT175K(6H), DT175K 4H, DT180, DT200, DT250, Find out(4H), DISCOVER125CC, DS80, DX100 | |
| E | ECO100, ECD DELUXE, ER100, ER125, ENG DAELIM ALTINO one hundred, | |
| F | FAN125, FD115, Force, Power-1, Liberty, FR80, FR100, FR80N, Freedom, FS80, | |
| G | G7T, GARELLIESTR, GL100, GL145, GLMAXNEO, GLPRO, GLPRONEO, GN5, GN125, GN125H, GP100, GP125, GRAND, GSX-R, GS125, GTO125, GTO110, GT50, GT80 | |
| J | JH70, JUPITER-Z, JUPITER-MX, CZPT DREIB, JUPITER-Z | |
| K | KARISMA, KAZE-R, KB4S, KB1004S, KXF250, KXF450 | |
| L | LIBERTY, LB80 | |
| M | M80, MB50, MB80, MB100, MOBYLLETE, MX180, | |
| N | NX125, NX250, NX350SHAHR, 06B-1,10B-1,12B-1,16B-1,20B-1,24B-1,28B-1,32B-1,40B-1,48B-1,56B-1,64B-1,72B-1 B Collection Simplex Chain Quick Pitch Roller Chain NX200, NX400, NXR125, NXR150, NXR | |
| P | Passion In addition NEW, PLATINA, PRIMA, PULSAR, PXK | |
| R | R530, RAJDOOT, RC80, RC100, RCN5, RD50, RD75,RD125,RD135, RMZ250, RS100, RS125, RV50, RV60, RV90, RX50, RX80, RX100, RX135, RX180, RXZ135, RXZ450, RXZ, RXK, RXK10, RZD125 | |
| S | S110, SCOPPION, SHOGUN, SIGMA, SIGMA100, SMASH, SMASH110, SPRINTER, SPLENDOR, SR125, SR150, SR250, SUPRA, SUPRA In shape NEW | |
| T | TDR250, T110, TIGER125, TINO, TITAN99, TITAN00, TITAN150, TITIAN2000, TITN-ninety nine, Tornado, TR125, TRX200, TRX350, TS100, TS100Z, TS125, TS185ER, TVI VICTOR, TW125, TZR125 | |
| V | V80, VEGAR, VEGAR NEW, VIVAX115, Scorching Sale Geometric Stainless Metal Few Ring Wholesale Multi Types Gold Plated Vintage Bulk Open up Adjustable Rings Eyesight | |
| W | WAVE, Win, WIN100 | |
| X | XLR, XL100, XL125, XL185, XL200R, XL250, XLT, XLX250/350, XLR125, XR200, XR200R, XR250, XT125, XT250, XTZ125, XV250 | |
| Y | YB50, YB80, YB100, YBR125, YD100, YD1110, YEB125, YS250, YZ125, YZF250, YZF450 |
Engineering
1.Heat therapy approach
two.Electrical galvanizing process
three.Nickel plating method
4.Plating bake approach
five.Black switch grinding method
six.Sanding plating
Market place
1. Japanese Asia
2. Southeast Asia
3. Mid East
4. Africa
five.South The united states
Edge
one.The geographical placement gain:situated in sprocket city,job produce each and every kind of sprocket
2.price tag gain:on the fundamental of promise of the amount,we reduction the feright of the value,then give you the greatest price tag
three. Precision Stamping
Packaging & Shipping
Payment and Shipping and delivery
1.payment is T/T,thirty% in progress,and the balance should be paid just before shipment
2.shipping and delivery time is 30days.
3.Min.order is 100set
Our Solutions
Getting a manufacturer of bike sprocket for numerous years, we’re ready to offer almost all kinds of motorcycle sprocket , with exceptional high quality and rates. Every single “DAJIN” solution is in accordance with the advanced equipment,
Large frequency quenching of Japan Complex, stringent inspection, a normal top quality promise program, as nicely as trustworthy provider.
We spend attention each smallest detail of sprocket and chain.
We preserve our items the same top quality all over the place in the entire world.
Good quality guarantee system needs each and every goods just take the running-in on check mattress prior to delivery. Our brand name “DAJIN” designs and manufactures the merchandise with advanced good quality check and marvelous measuring services.
Guaranteeing steady and timely source, credible top quality and sincere service .
What we pursue is to dominate the industry with higher quality items and to acquire the self confidence the two domestic and entire world vast with the ideal provider.
We handle the complete raw material channel, they are from Shougang Team, Capital Iron and Metal Organization, not from other small metal manufacturing facility,
Organization Data About the manufacturing unit
one.Made BY HangZhou CZPT motorbike parts Co.,Ltd.
2.Have complete creation line and Advanced creation technology,make the price of production far more less so we can supply you favourble price
3.we have total generation product,we can do or custom made each type you want
4.we do emphasis on generation quality,and is a great chose for your lengthy time cooperation spouse
5.we have flexible negotiation so that we can satisfy your much advantage
6.we also provide special processing in accordance to drawing and sample for customer
FAQ
A:Do you accept customize?Q:Yes, we settle for personalized orders, also we provide OEM and ODM service.
A:Can you print our symbol or company identify ?Q:Sure,we could print your emblem or organization title on item.There are several strategies we can supply.
A:Is it attainable to get a sample? Q:Inventory samples are offered, pls make contact with us for more information,we could also personalize sample for you.
A:What measurement do you have? Q:All dimensions are accessible,if you are not sure how to determine dimension,pls come to feel cost-free to make contact with with us,we could give you recommendations for your reference.
A:What coloration possibilities do you have?
Q:All hues are available,you could give us the quantity of panton colour.
A:Do you permit to do high quality examine soon after order accomplished?
Q:Indeed,welcome to our firm.
A:Lead time? Q:thirty-40 times,rely on your order. Supply in time.
Send your inquiry Dtails in the underneath for Cost-free SAMPLE,Click on “Ship” now !! Substantial Top quality Z10-3060 keyless shaft-hub locking device adjustable secure cam assembly Manufacturing unit Cost energy lock coupling protector !
make to buy sprockets are also offered with extremely fase delievery time
Sprocket Basics
When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
size
There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.
Material
Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
Function
A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
maintain
Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.
editor by Cx 2023-07-04
China 1045# steel high quality motorcycle chain and sprocket set for Honda china manufacturer motorcycle chain sprocket price with Best Sales
Sort: Bike Sprocket
Model Number: DJ20150506001
shade: white ,black,brass, as your require
materials: A3 steel forty five steel
certificate: ISO9001/2000
thinkness: 6.0m-7.0m
surface treatment: Zinc plating ,Chrome plating,printing
hardness: forty-55HRC
fat: .95kgs
Enamel No: 13-17T 34-60T
Regular or Non regular: regular
good quality class: A-course
Packaging Specifics: Blister card, slide blister, plastic luggage ,carton ,bubble bag,color box.as you need to have
Port: ZheJiang
1045# steel substantial quality bike chain and sprocket established for Honda china manufacturer motorcycle chain sprocket price tag
Solution Introduction
one.Motorbike sprocket variety is 420,428,520,530 and so on
2.Substance have A3 and 45# metal
3.Thickness is 6.8~7.
4.Surface engineering is polish, sand plating ,CNC line and so on
5.Floor therapy is zinc plating ,chrome plating,nickle plating
six.Fat for 1 established is about .8kg
seven.Enamel amount arrange 13t~17t,34t~60t
| A | A50, A80, A100, AG100, AK100, AK125SL, ALFA-FIZR, AX100, AX115 | |
| B | BAJAJ, BEST125, BIZ100, BIZ125, BOXER, BROS125, BROS150 | |
| C | C50, C70, C90, C100, C100-BIZ, CALIBER, CALIBER115, CB100, CB125, CB125T, CB250N, CB400, CBF150, CBR, CBR250, CBR400, CBX150, CBX200, CBX250, CBZ160, CD70, CD80, CD100, CD125, CF50, CFR250, CFR450, CG125, CG150, CG125FAN, CN125, CRUX, CRX100, CRYTPON, CT100,CUB7090, CXR100 | |
| D | DAELIM, Coupling Manufacturer with out flex flange type universal coupling Manufacturing facility immediate sale double common joint cardan shaft DAX70, DT100, DT50, DT125, DT125T, DT125K, DT125R, DT150,DT175,DT175K(6H), DT175K 4H, DT180, DT200, DT250, Find out(4H), DISCOVER125CC, DS80, DX100 | |
| E | ECO100, ECD DELUXE, ER100, ER125, ENG DAELIM ALTINO one hundred, | |
| F | FAN125, FD115, Power, Drive-1, Flexibility, FR80, FR100, FR80N, Liberty, FS80, | |
| G | G7T, GARELLIESTR, GL100, GL145, GLMAXNEO, GLPRO, GLPRONEO, GN5, GN125, GN125H, GP100, GP125, GRAND, GSX-R, GS125, GTO125, GTO110, GT50, GT80 | |
| J | JH70, JUPITER-Z, JUPITER-MX, CZPT DREIB, JUPITER-Z | |
| K | KARISMA, KAZE-R, KB4S, KB1004S, KXF250, KXF450 | |
| L | LIBERTY, LB80 | |
| M | M80, MB50, MB80, MB100, MOBYLLETE, MX180, | |
| N | NX125, NX250, NX350SHAHR, Manufacturing unit Cost keyless shaft locking device adjustable risk-free clamp power locks Higher High quality industrial gear cam assembly NX200, NX400, NXR125, NXR150, NXR | |
| P | Enthusiasm In addition NEW, PLATINA, PRIMA, PULSAR, PXK | |
| R | R530, RAJDOOT, RC80, RC100, RCN5, RD50, RD75,RD125,RD135, RMZ250, RS100, RS125, RV50, RV60, RV90, RX50, RX80, RX100, RX135, RX180, RXZ135, RXZ450, RXZ, RXK, RXK10, RZD125 | |
| S | S110, SCOPPION, SHOGUN, SIGMA, SIGMA100, SMASH, SMASH110, SPRINTER, SPLENDOR, SR125, SR150, SR250, SUPRA, SUPRA In shape NEW | |
| T | TDR250, T110, TIGER125, TINO, TITAN99, TITAN00, TITAN150, TITIAN2000, TITN-99, Tornado, TR125, TRX200, TRX350, TS100, TS100Z, TS125, TS185ER, TVI VICTOR, TW125, TZR125 | |
| V | V80, VEGAR, VEGAR NEW, VIVAX115, TAR Model collection substantial torsional and higher speed flange disc diaphragm couplings for turbine Vision | |
| W | WAVE, Earn, WIN100 | |
| X | XLR, XL100, XL125, XL185, XL200R, XL250, XLT, XLX250/350, XLR125, XR200, XR200R, XR250, XT125, XT250, XTZ125, XV250 | |
| Y | YB50, YB80, YB100, YBR125, YD100, YD1110, YEB125, YS250, YZ125, YZF250, YZF450 |
Technology
1.Warmth remedy method
2.Electric powered galvanizing approach
3.Nickel plating method
4.Plating bake process
5.Black turn grinding approach
six.Sanding plating
Market
1. Jap Asia
two. Southeast Asia
3. Mid East
4. Africa
five.South America
Benefit
1.The geographical situation gain:positioned in sprocket town,profession generate each and every sort of sprocket
two.value edge:on the basic of promise of the quantity,we reduction the feright of the value,then give you the best cost
3. Precision Stamping
Packaging & Transport
Payment and Shipping and delivery
1.payment is T/T,30% in advance,and the harmony should be paid out prior to shipment
2.shipping time is 30days.
3.Min.get is 100set
Our Companies
Becoming a manufacturer of motorcycle sprocket for several many years, we’re able to supply practically all kinds of motorbike sprocket , with outstanding top quality and charges. Each “DAJIN” merchandise is in accordance with the innovative machinery,
Higher frequency quenching of Japan Specialized, rigid inspection, a common top quality promise program, as effectively as dependable provider.
We shell out attention each smallest depth of sprocket and chain.
We maintain our products the same high quality almost everywhere in the globe.
High quality promise technique requires every products consider the operating-in on test bed just before shipping. Our brand “DAJIN” designs and manufactures the products with superior quality take a look at and marvelous measuring facilities.
Guaranteeing steady and well timed source, credible quality and sincere service .
What we pursue is to dominate the marketplace with large high quality items and to win the self-assurance each domestic and world vast with the greatest provider.
We handle the whole raw substance channel, they are from Shougang Team, Funds Iron and Metal Company, not from other small metal factory,
Firm Details About the manufacturing unit
1.Manufactured BY HangZhou CZPT bike components Co.,Ltd.
2.Have full generation line and Sophisticated generation technologies,make the expense of creation much more much less so we can provide you favourble value
3.we have complete generation product,we can do or custom made each and every variety you want
4.we do concentrate on generation good quality,and is a very good selected for your long time cooperation companion
5.we have flexible negotiation so that we can satisfy your much benefit
six.we also provide special processing according to drawing and sample for shopper
FAQ
A:Do you accept customize?Q:Of course, we settle for custom-made orders, also we give OEM and ODM services.
A:Can you print our brand or business title ?Q:Of course,we could print your symbol or business name on merchandise.There are several techniques we can provide.
A:Is it feasible to get a sample? Q:Inventory samples are available, pls make contact with us for a lot more specifics,we could also customize sample for you.
A:What dimensions do you have? Q:All dimensions are available,if you are not confident how to determine measurement,pls feel free of charge to get in touch with with us,we could give you suggestions for your reference.
A:What shade choices do you have?
Q:All colours are available,you could give us the number of panton color.
A:Do you let to do top quality check out right after buy concluded?
Q:Yes,welcome to our firm.
A:Direct time? Q:thirty-40 days,count on your order. Supply in time.
Send your inquiry Dtails in the underneath for Totally free SAMPLE,Click on “Deliver” now !! TS-A product adaptable jaw coupling for pump !
make to order sprockets are also accessible with really fase delievery time
How to Identify a Sprocket
When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
buy sprockets
When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.
Identify sprockets
One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
Replace sprocket
If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.
Replace worn chains
To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.
Check the sprocket for rust
One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
Replace worn sprockets
You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.
editor by Cx 2023-07-04
China 1045# steel high quality motorcycle chain and sprocket set for Honda china manufacturer motorcycle chain sprocket price drive sprocket
Sort: Bike Sprocket
Model Number: DJ20150506001
coloration: white ,black,brass, as your need to have
materials: A3 steel forty five metal
certificate: ISO9001/2000
thinkness: 6.0m-7.0m
surface treatment: Zinc plating ,Chrome plating,printing
hardness: forty-55HRC
weight: .95kgs
Teeth No: 13-17T 34-60T
Regular or Non common: normal
good quality course: A-class
Packaging Details: Blister card, slide blister, plastic bags ,carton ,bubble bag,coloration box.as you want
Port: ZheJiang
1045# steel substantial high quality motorbike chain and sprocket established for Honda china company motorbike chain sprocket cost
Solution Introduction
1.Motorcycle sprocket sort is 420,428,520,530 and so on
two.Content have A3 and 45# steel
3.Thickness is 6.8~7.
4.Surface area technologies is polish, sand plating ,CNC line and so on
5.Floor treatment method is zinc plating ,chrome plating,nickle plating
6.Weight for 1 established is about .8kg
seven.Enamel variety set up 13t~17t,34t~60t
| A | A50, A80, A100, AG100, AK100, AK125SL, ALFA-FIZR, AX100, AX115 | |
| B | BAJAJ, BEST125, BIZ100, BIZ125, BOXER, BROS125, BROS150 | |
| C | C50, C70, C90, C100, C100-BIZ, CALIBER, CALIBER115, CB100, CB125, CB125T, CB250N, CB400, CBF150, CBR, CBR250, CBR400, CBX150, CBX200, CBX250, CBZ160, CD70, CD80, CD100, CD125, CF50, CFR250, CFR450, CG125, CG150, CG125FAN, CN125, CRUX, CRX100, CRYTPON, CT100,CUB7090, CXR100 | |
| D | DAELIM, Coupling Maker without having flex flange kind common coupling Factory direct sale double common joint cardan shaft DAX70, DT100, DT50, DT125, DT125T, DT125K, DT125R, DT150,DT175,DT175K(6H), DT175K 4H, DT180, DT200, DT250, Uncover(4H), DISCOVER125CC, DS80, DX100 | |
| E | ECO100, ECD DELUXE, ER100, ER125, ENG DAELIM ALTINO 100, | |
| F | FAN125, FD115, Drive, Power-1, Independence, FR80, FR100, FR80N, Liberty, FS80, | |
| G | G7T, GARELLIESTR, GL100, GL145, GLMAXNEO, GLPRO, GLPRONEO, GN5, GN125, GN125H, GP100, GP125, GRAND, GSX-R, GS125, GTO125, GTO110, GT50, GT80 | |
| J | JH70, JUPITER-Z, JUPITER-MX, CZPT DREIB, JUPITER-Z | |
| K | KARISMA, KAZE-R, KB4S, KB1004S, KXF250, KXF450 | |
| L | LIBERTY, LB80 | |
| M | M80, MB50, MB80, MB100, MOBYLLETE, MX180, | |
| N | NX125, NX250, NX350SHAHR, Manufacturing unit Value keyless shaft locking device adjustable protected clamp electricity locks Higher Top quality industrial gear cam assembly NX200, NX400, NXR125, NXR150, NXR | |
| P | Passion In addition NEW, PLATINA, PRIMA, PULSAR, PXK | |
| R | R530, RAJDOOT, RC80, RC100, RCN5, RD50, RD75,RD125,RD135, RMZ250, RS100, RS125, RV50, RV60, RV90, RX50, RX80, RX100, RX135, RX180, RXZ135, RXZ450, RXZ, RXK, RXK10, RZD125 | |
| S | S110, SCOPPION, SHOGUN, SIGMA, SIGMA100, SMASH, SMASH110, SPRINTER, SPLENDOR, SR125, SR150, SR250, SUPRA, SUPRA Fit NEW | |
| T | TDR250, T110, TIGER125, TINO, TITAN99, TITAN00, TITAN150, TITIAN2000, TITN-ninety nine, Tornado, TR125, TRX200, TRX350, TS100, TS100Z, TS125, TS185ER, TVI VICTOR, TW125, TZR125 | |
| V | V80, VEGAR, VEGAR NEW, VIVAX115, TAR Product sequence substantial torsional and high speed flange disc diaphragm couplings for turbine Eyesight | |
| W | WAVE, Win, WIN100 | |
| X | XLR, XL100, XL125, XL185, XL200R, XL250, XLT, XLX250/350, XLR125, XR200, XR200R, XR250, XT125, XT250, XTZ125, XV250 | |
| Y | YB50, YB80, YB100, YBR125, YD100, YD1110, YEB125, YS250, YZ125, YZF250, YZF450 |
Engineering
one.Heat treatment procedure
2.Electric powered galvanizing method
three.Nickel plating method
4.Plating bake process
5.Black change grinding procedure
six.Sanding plating
Market
1. Jap Asia
2. Southeast Asia
3. Mid East
4. Africa
5.South America
Benefit
1.The geographical position advantage:found in sprocket town,occupation generate each and every sort of sprocket
two.price gain:on the standard of ensure of the quantity,we reduction the feright of the expense,then give you the best price tag
three. Precision Stamping
Packaging & Shipping and delivery
Payment and Shipping and delivery
1.payment is T/T,thirty% in advance,and the equilibrium need to be paid out just before cargo
2.supply time is 30days.
3.Min.order is 100set
Our Solutions
Getting a company of motorbike sprocket for several many years, we’re capable to offer virtually all sorts of motorbike sprocket , with excellent top quality and prices. Every single “DAJIN” solution is in accordance with the superior equipment,
Large frequency quenching of Japan Technical, strict inspection, a common quality guarantee program, as well as reputable service.
We pay out attention every smallest depth of sprocket and chain.
We maintain our merchandise the identical quality everywhere in the world.
Good quality guarantee program needs each merchandise consider the managing-in on examination bed just before shipping. Our brand “DAJIN” designs and manufactures the products with superior quality take a look at and marvelous measuring amenities.
Guaranteeing stable and timely supply, credible good quality and honest service .
What we go after is to dominate the market place with large high quality products and to acquire the self-confidence both domestic and planet wide with the ideal service.
We handle the whole raw content channel, they are from Shougang Team, Capital Iron and Steel Organization, not from other tiny metal factory,
Organization Information About the factory
one.Manufactured BY HangZhou CZPT bike areas Co.,Ltd.
2.Have total creation line and Innovative production engineering,make the value of creation a lot more less so we can supply you favourble cost
3.we have complete creation design,we can do or customized each sort you want
4.we do concentrate on creation top quality,and is a good chose for your long time cooperation associate
5.we have flexible negotiation so that we can fulfill your considerably gain
6.we also provide particular processing in accordance to drawing and sample for client
FAQ
A:Do you take customize?Q:Sure, we settle for custom-made orders, also we offer OEM and ODM provider.
A:Can you print our emblem or firm identify ?Q:Of course,we could print your emblem or organization identify on product.There are a lot of methods we can give.
A:Is it possible to get a sample? Q:Inventory samples are obtainable, pls speak to us for far more particulars,we could also customize sample for you.
A:What dimension do you have? Q:All measurements are offered,if you are not positive how to make a decision measurement,pls really feel free of charge to contact with us,we could give you tips for your reference.
A:What colour possibilities do you have?
Q:All hues are offered,you could supply us the amount of panton color.
A:Do you let to do quality verify right after buy completed?
Q:Indeed,welcome to our business.
A:Guide time? Q:thirty-40 days,depend on your get. Supply in time.
Ship your inquiry Dtails in the beneath for Totally free SAMPLE,Click “Send out” now !! TS-A product adaptable jaw coupling for pump !
make to buy sprockets are also accessible with really fase delievery time
How to choose the right sprocket
Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.
Long Through Hole
Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.
face width
The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.
diameter
One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.
hub type
The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.
HZPT ZTB series
ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
set screw
Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.
editor by Cx 2023-06-27
China manufacturer Short Pitch Precision Roller Chains and Bush Chains 28b Series Sprockets sprocket bar
Product Description
SPROCKET 1” 3/4 X 1”1/4 28B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 44.0mm | ||||
| Radius Width C | 5.0mm | ||||
| Tooth Width b1 | 29.4mm | ||||
| Tooth Width B1 | 28.8mm | ||||
| Tooth Width B2 | 88.4mm | ||||
| Tooth Width B3 | 148mm | ||||
| 32B SERIES ROLLER CHAINS | |||||
| Pitch | 44.45 mm | ||||
| Internal Width | 30.99 mm | ||||
| Roller Diameter | 27.94 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX | ||||||
| dm | D1 | A | dm | D2 | A | dm | D3 | A | |||
| 8 | 132.0 | 116.15 | 74 | 25 | 70 | 74 | 25 | 120 | 74 | 30 | 180 |
| 9 | 148.4 | 129.96 | 88 | 25 | 70 | 88 | 25 | 120 | 88 | 30 | 180 |
| 10 | 162.3 | 143.85 | 100 | 25 | 70 | 100 | 25 | 120 | 100 | 30 | 180 |
| 11 | 176.3 | 157.77 | 112 | 25 | 70 | 112 | 25 | 120 | 112 | 30 | 180 |
| 12 | 189.5 | 171.74 | 125 | 25 | 70 | 125 | 25 | 120 | 125 | 30 | 180 |
| 13 | 204.2 | 185.75 | *125 | 25 | 70 | *125 | 25 | 120 | *125 | 30 | 180 |
| 14 | 218.2 | 199.76 | *125 | 25 | 70 | *125 | 25 | 120 | *125 | 30 | 180 |
| 15 | 232.3 | 213.79 | *125 | 25 | 70 | *125 | 25 | 120 | *125 | 30 | 180 |
| 16 | 246.3 | 227.84 | *160 | 30 | 75 | *160 | 30 | 120 | *160 | 30 | 180 |
| 17 | 260.3 | 241.91 | *160 | 30 | 75 | *160 | 30 | 120 | *160 | 30 | 180 |
| 18 | 274.0 | 255.89 | *160 | 30 | 75 | *160 | 30 | 120 | *160 | 30 | 180 |
| 19 | 289.0 | 270.06 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 30 | 180 |
| 20 | 303.0 | 284.15 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 30 | 180 |
| 21 | 317.0 | 298.24 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 30 | 180 |
| 22 | 331.0 | 312.34 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 30 | 180 |
| 23 | 345.0 | 326.44 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 30 | 180 |
| 24 | 359.0 | 340.55 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 30 | 180 |
| 25 | 373.0 | 354.66 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 26 | 387.0 | 368.77 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 27 | 401.4 | 382.88 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 28 | 416.0 | 397.00 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 29 | 430.0 | 411.12 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 30 | 444.0 | 425.24 | *160 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 31 | 458.0 | 439.37 | *180 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 32 | 472.0 | 453.49 | *180 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 33 | 486.0 | 467.62 | *180 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 34 | 500.0 | 481.75 | *180 | 30 | 75 | *180 | 30 | 120 | *180 | 40 | 180 |
| 35 | 514.0 | 495.88 | *180 | 30 | 75 | *200 | 30 | 130 | *200 | 40 | 180 |
| 36 | 529.0 | 510.01 | *180 | 30 | 75 | *200 | 30 | 120 | *180 | 40 | 180 |
| 37 | 543.0 | 524.14 | *180 | 30 | 75 | *200 | 30 | 120 | *180 | 40 | 180 |
| 38 | 557.0 | 538.27 | *180 | 30 | 75 | *200 | 30 | 120 | *200 | 40 | 180 |
| 39 | 571.0 | 552.40 | *180 | 30 | 75 | *200 | 30 | 120 | *200 | 40 | 180 |
| 40 | 585.0 | 566.54 | *180 | 30 | 75 | *200 | 30 | 120 | *200 | 40 | 180 |
| 45 | 656.0 | 637.22 | *180 | 30 | 90 | *200 | 30 | 120 | *200 | 40 | 180 |
| 50 | 726.0 | 707.91 | *180 | 30 | 90 | *200 | 30 | 120 | *200 | 40 | 180 |
| 57 | 825.0 | 806.89 | *180 | 30 | 100 | *200 | 30 | 120 | *200 | 40 | 180 |
| 60 | 869.0 | 849.32 | *180 | 30 | 100 | *200 | 30 | 120 | *200 | 40 | 190 |
| 76 | 1095.0 | 1075.60 | *180 | 30 | 100 | *200 | 30 | 120 | *200 | 40 | 190 |
Notice: *welding hub
BASIC INFO.
| Product name | DIN ISO Standard Sprocket for Roller Chain |
| Materials Available | 1. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc | |
| 3. OEM according to your request | |
| Surface Treatment | Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Size | Customer Drawings & ISO standard |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
| Certificate | ISO9001: 2008 |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 20 days for samples. 45 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | 1045, Stainless Steel, Q235, Brass |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by CX 2023-05-30
China Standard XCMG Spare Parts Crawler Tractor Excavator Bulldozer Undercarriage Sprocket from Original Factory manufacturer
Product Description
OUR STRENGTHES
1) The original undercarriage parts at favorable prices
2) OEM undercarriage parts with good quality
3) Long wear life and high working efficiency
4) Quick response and fast delivery with regular inventories
5) Strong and healthy cash flow allows us to offer flexible payment terms
CRAFTSMANSHIP
1. The driving wheel body is made of high-hardenability manganese alloy cast steel material. After quenching and tempering heat treatment, the matrix is subjected to medium-frequency induction quenching treatment on the entire tooth surface. The surface hardened layer has uniform structure and fine grains. The matrix has good toughness and strength. The mask has high wear resistance;
2. Adopt multi-power segmented induction quenching heating process to realize precise control of tooth root, tooth surface, tooth top heating temperature, heat penetration depth and hardened layer depth;
3. The large-tonnage mine-type drive wheel is made of high-hardenability cast steel Mn-Mo alloy cast steel material, which further improves the strength and impact toughness.
Drawing
We will confirm before every shipment
DETAILS
MANUFACTURING
WAREHOUSE
QUALITY CONTROL
FAQ
Q1: Are you trading company or manufacturer?
A: We are not manufacturer, we manage the supply chain and offer undercarriage parts for XCMG crawler undercarriages, including track rollers/bottom rollers,top rollers/carrier rollers,driving sprockets/ sprocket rims/sprocket segments,track idlers,track chains/track link assy, track shoes/ track pads,track bolts,track nuts,track pins,track bushings,etc. Both original and OEM undercarriage parts are available here.
Q2: Hong long is your delivery time?
A: It depends on the quantity. For a big order, the time is generally 10-25 days after order. For a small order, customers can get goods at once. We hold regular stock up to 20 million for popular undercarriage parts, just contact our sales to tell your excavator model number then we will inform whether we have them in stock ready for shipment.
Q3: Do you produce samples? Is it free?
A: We don’t produce samples free of charge for our customer, but your sample cost paid can be returned after your first standard order is placed.
Q4: How to ensure the quality?
A: We produce as per the confirmed technology or drawings for each order for our customers. And our factories followed the strict quality control system provided by XCMG. We inspect goods during production according to a required frequency and we also perform the final inspection before the goods are packed.
Q5: How’s your after sales service?
A: We do offer a warranty.The warranty period will be 12 months or 2000hrs whichever comes first. This warranty does not cover the covering parts and wearing parts.If there is any quality problem within the warranty period, CZPT Machinery will provide solutions accordingly.
Any interest, will be glad to show you more.
Please feel free to contact us for more information about details and offers.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| After-sales Service: | Reply in 24 Hours |
|---|---|
| Warranty: | 12 Months |
| Type: | Undercarrial Parts |
| Customization: |
Available
| Customized Request |
|---|
What is a sprocket?
A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.
ISO sprocket uniformity
ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.
metal sprocket
Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
plastic sprocket
Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
Aluminum sprocket
Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
editor by CX 2023-05-24