Product Description
China Low price High Speed Ladder type cable tray roll forming machine
cable tray system is used to support insulated electrical cables used for power distribution, control, and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction
cable tray making machines,cable tray roll forming machine,Cable Tray Production Line make different sizes of cable tray, for example cable tray width from 100-800mm, height from 50-200mm. it is easy to change size by moving whole line rollers and cut blade positions.
Process of cable tray forming machines:
decoiler material-leveling-punch-cutting-powered transmission table-forming
Main features of cable forming machines
suitable material thickness 0.8-2.5mm
gearbox move the cable tray lines
roller material CR12 mould
solid shaft diameter 80mm
punch capicity 25T x 2
machine weight about 40 ton
Decoiler
5 Tons hydraulic Decoiler,material width <= 1250mm, inner coil <= 480-520mm,outter diameter coil <= 1500mm.
Material Feeding Xihu (West Lake) Dis.
1. Positioning plate: Adjust the position of both ends to makt it fit the width of the feeding.
2.Xihu (West Lake) Dis. frame: Play a role in supporting the transport of the matrial roll
3. Xihu (West Lake) Dis. roller:The upper and lower round rollers are designed to make the feeding process more smooth.
Leveling Device1.leveling roller upper 5 roller,down 4 rollers
2. Leveling roller diameter: 100mm
3.Material: 40Cr heat treatment, electroplating
4.Motor Power: 7.5kw
5.Leveling speed: 12m/min
Punching Part
1.Hydraulic punching, all holes required for punching profiles at 1 time, adjustable punching row spacing
2.Cylinder: 25ton x 2
3.Hydraulic power: 11kw
4.Die Material:Cr12 Mov heat treatment HRC5-62,Two dies
5. Punching accuracy:+ – 1 mm
6. Type-changing method: the screw rod adjusts the position of the left and right oil cylinders,and the left and right hole row spacing
can be adjusted
Hydraulic pre-cutting
1.Hydraulic front shearing,stop cutting,no waste
2.Cylinder: 15 tons
3.Blade material; Cr12 Heat treatment HRC58-62
powered transmission table
1.Power flat roll, motor drive, screw width adjustment
2.Length 6 mtrs
3.Flat roll size: Φ60mm, 45# steel surface electroplating
4.Motor power: 1.5 kw
Main Roll Forming Mill
1.Automatic continuous roll forming, manual + automatic control, motor drive, stepless adjustment in the range of width 100-800, height 50-200, electric control to adjust the above parameters
2.Forming material: ordinary cold-rolled sheet and galvanized sheet below 350Mpa
3.Working range: feed width 1200mm, material thickness 1.0-2.0mm
4.Roller stations: 26 stations
5.Motor Power:5.5+4 kw
6.Transmission mode: gear, sprocket
7.Shaft Diameter: 80mm,45# steel
8.Roller material: 40Cr heat treatment HRC55-60, hard chrome plating on the surface
9.Forming frame: H400 section steel welded with 25mm table top, the whole is shot blasted and sanded to remove rust. Multi-hole gantry milling machine table and connection port.
10:Wall panel: 25mm thick iron plate, plasma cutting nitrogen cooling to ensure straightness ±1mm, surface shot blasting and sanding to remove rust, 5m CNC gantry milling to process the appearance, bearing holes and bearing slip.
11.Forming Speed:12m/min
12.Adjustment method: The display screen sets the profile parameters, the computer automatically adjusts the distance between the left and right
roll groups, and the motor drives
13:Adjusting motor power: 2.2kw x 2
Product Features
1. More efficient and accurate execution of production orders;
2. High equipment reliability;
3. Little waste of materials and energy;
4. High productivity;
5. High quality materials, get a longer service life;
6. All parts of the machine are processed with precision, and the surface of the roll is chromeplated to ensure that customers can
get qualified products at the same time, it can avoid the scratch of the color steel surface paint, and increase the service life of the roll;
7. Customized coil processing solutions to solve all aspects of technical problems.
Why choose Us?
- We have sold more than 3000 sets roll forming machines to many countries around the world.
- We have hundreds of models about all kinds of roll forming machine for your reference, you could’t worry if you don’t have a profile drawing.We can recommond you some classical models that is common in your country.
- When designing the machine, our considerate service will estimate and avoid the problem that may happen.
- One set machine can provide many solutions with different price level.But they are all the cost-effective.
- We attach importance to many details. Every machine part quality is higher than our competitors in same price level.
| After-sales Service: | Online Support, Free Spare Parts |
|---|---|
| Warranty: | 12 Months |
| Certification: | CE, ISO9001 |
| Customized: | Customized |
| Condition: | New |
| Control Type: | CNC |
| Samples: |
US$ 110000/Set
1 Set(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do I Prevent Wear and Damage to Ladder Sprockets during Conveyor Operation?
Preventing wear and damage to ladder sprockets during conveyor operation is essential to ensure their longevity and maintain the overall efficiency of the conveyor system. Here are some preventive measures to follow:
- Proper Lubrication: Apply the appropriate lubricant to the ladder sprockets and the conveyor chain regularly. Lubrication reduces friction between the sprocket teeth and the chain links, minimizing wear and prolonging the sprocket’s life.
- Chain Tension: Maintain the correct tension in the conveyor chain. Proper tensioning prevents excessive stress on the ladder sprockets and chain links, reducing wear and preventing premature failure.
- Chain Alignment: Ensure the conveyor chain is correctly aligned with the ladder sprocket. Misalignment can cause uneven wear on the sprocket teeth and chain links, leading to accelerated wear and potential damage.
- Cleanliness: Keep the ladder sprockets and the surrounding area clean from debris, dirt, and contaminants. Foreign particles can cause chain jamming, accelerated wear, and affect sprocket performance.
- Regular Inspection: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Early detection of issues allows for timely maintenance and prevents further damage.
- Replace Worn Sprockets: Monitor the condition of the ladder sprocket teeth regularly. If the sprocket teeth show significant wear, chipping, or deformation, replace the sprocket promptly to prevent further damage to the conveyor chain.
- Inspect Chain Wear: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. A worn chain can accelerate sprocket wear, so replace the chain if it is beyond its recommended service life.
- Load Capacity: Ensure that the ladder sprockets are appropriately sized and rated for the load capacity of the conveyor system. Using sprockets that are too small or not designed for heavy-duty applications can lead to premature wear and failure.
- Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.
By following these preventive measures, you can minimize wear and damage to ladder sprockets, prolong their service life, and maintain a reliable and efficient conveyor system. Regular maintenance and inspections are essential to identify and address any potential issues early on, preventing costly downtime and ensuring the smooth operation of your conveyor system.
How do I Calculate the Required Torque and Power for a Ladder Sprocket Setup?
Calculating the required torque and power for a ladder sprocket setup involves considering several factors related to the conveyor system’s design and operation. Here’s a step-by-step guide to the calculation process:
- Identify Parameters: Gather the necessary data, including conveyor system specifications such as conveyor length, speed, chain pitch, sprocket diameter, and the weight of the conveyed material per unit length (if applicable).
- Calculate Chain Tension: Determine the chain tension in the conveyor system. Chain tension depends on the conveyor’s angle of inclination, the weight of the material being conveyed, and any additional forces acting on the chain.
- Calculate Chain Pull Force: The chain pull force is the force required to move the conveyor chain. It is calculated by multiplying the chain tension by the number of chain strands.
- Calculate Torque: To calculate the torque required for the ladder sprocket, multiply the chain pull force by the sprocket radius. The sprocket radius is half of the sprocket diameter.
- Consider Efficiency: Take into account the efficiency of the conveyor system. The actual torque required will be higher than the calculated torque due to efficiency losses in bearings, chains, and other components.
- Calculate Power: To determine the power required for the ladder sprocket setup, multiply the calculated torque by the conveyor’s rotational speed in radians per second. The rotational speed can be obtained by converting the conveyor speed from meters per second to radians per second.
- Apply Safety Factors: Apply safety factors to the calculated torque and power values to ensure that the system can handle occasional peak loads and avoid running the system at its maximum capacity continuously.
Keep in mind that these calculations provide an estimate of the required torque and power for the ladder sprocket setup. Actual operating conditions, variations in material properties, and other external factors may influence the results. Additionally, it’s essential to consult conveyor system experts or sprocket manufacturers for further guidance and to verify the accuracy of the calculations.
By accurately calculating the required torque and power, you can ensure that the ladder sprocket setup is appropriately sized to handle the conveyor system’s load and operational demands, leading to efficient and reliable conveyor performance.
How do I Choose the Right Size and Pitch of a Ladder Sprocket for my Conveyor System?
Choosing the right size and pitch of a ladder sprocket for your conveyor system is critical to ensure proper operation, efficient power transmission, and prolonged equipment life. Here are the steps to guide you through the selection process:
- 1. Identify Conveyor Chain Type: Determine the type of conveyor chain used in your system. Different chain types have specific pitch measurements, and the ladder sprocket must match the chain’s pitch to ensure proper engagement.
- 2. Determine Sprocket Teeth Count: Calculate the required number of teeth for the ladder sprocket based on the desired conveyor speed, driven shaft RPM, and the chain’s speed factor. The speed factor is typically provided by the chain manufacturer.
- 3. Consider Chain Wrap Angle: Ensure that the sprocket size allows for sufficient chain wrap around the sprocket to prevent chain disengagement. The chain wrap angle should be within the manufacturer’s recommended range.
- 4. Assess Conveyor Load: Evaluate the conveyor system’s load and the maximum tension the chain will experience. The ladder sprocket’s material and design must be able to handle the load without deformation or failure.
- 5. Determine Shaft Diameter: The ladder sprocket’s bore size (inner hole) should match the driven shaft’s diameter or use a taper-lock bushing or through-bore hub to adapt the sprocket to the shaft size.
- 6. Consider Space Constraints: Ensure that the chosen ladder sprocket size fits within the available space in the conveyor system without interfering with other components.
- 7. Consult Manufacturer Data: Refer to the ladder sprocket manufacturer’s data and specifications to find the appropriate sprocket size and pitch options for your specific conveyor chain type.
- 8. Opt for High-Quality Materials: Choose a ladder sprocket made from high-quality materials that offer good wear resistance and durability, especially for applications with harsh environments or heavy loads.
- 9. Seek Expert Advice: If you are unsure about the selection process, consult with conveyor system experts or sprocket manufacturers for assistance in choosing the right ladder sprocket size and pitch.
By carefully considering the chain type, conveyor load, sprocket teeth count, and other relevant factors, you can select the appropriate size and pitch of a ladder sprocket that ensures optimal performance and reliable power transmission in your conveyor system.
editor by CX 2023-10-08
Flat Flex W price ire Mesh Convey Cheap or Belt for Straight/Curve Noodle Drying Machine
Product Description
Flat Flex CZPT Belt Description
Flat flex conveyor belt is also called Z-Type bend conveyor belt, chocolate conveyor belt, ladder conveyor belt, interlaced wire conveyor belt or strip conveyor belt. It is an ideal wire conveyor belt for light products transfers and its large open area makes it the most efficient belt for many applications and processes.
Flat Flex CZPT Belt Structure
Stainless Steel wire conveyor belt is made of SUS304 / 316 wire material, formed by mold pressing, normally driven by stainless steel or nylon sprockets, or by roller chains at two sides under special applications. The width is from 150mm to 6000mm. It can be used for both straight running and turning conveyors.
Flat flex conveyor belt can be supplied with PTFE coating to obtain a CZPT -stick surface.
Common conveyor belt edge finish is Single Loop, Double Loops can reinforce the outside edge of the belt, and wire CZPT for double loops edge is from 1.0mm to 1.2mm.
Flat flex conveyor belt is also known as trapezoidal mesh belt. CZPT steel flat flex mesh belt is made by mesh belt of top hardness through a special mold pressing, the edge can also be driven by the chain.
Stainless Steel Flat Flex Wire Belt have CZPT ed performance especially in food industry. With up to 86% open surface area, flat flex conveyor belts promote maximum flow through and are the proven solution for major processors. Its design and clean in place capability make it even easier to keep your line hygienic, and with many wire diameters and pitches to choose from, you’ll be able to find the right belt for your application.
Flat flex conveyor belts are usually gear transmission belt, with good ventilation advantages, tension evenly, fine workmanship, the flat flex belts with a flexible rotation, good stability, CZPT temperature, pressure resistance, corrosion resistance, CZPT life and so on.
Flat flex conveyor belts are used with a single-layer structure, lighter, the use of sprocket drive. Large open area (opening 70-85%), often used in the lighter weight of the product cooling, frying, baking, drying, heating, decoration, wrapped powder and packaging equipment.
Advantage Of Stainless Steel Flat Flex Wire Mesh CZPT Belt
1. Large opening area, maximum maximum Air-Flow Improve Efficiency
2. Fine workmanship, uniform pulling force, flexible running and good stability
3. CZPT resistance to cold shrinkage, oxidation and fracture at negative temperature and high temperature
4. Smallest diameter end rolls and drive rolls
5. non-slip positive drive
6. Reasonable design, compact structure, with a large variety of pitch and wire diameters to choose
7. hygienic design,easy to clean,clean-in-place capability,long lasting
|
1) Large open area up to 86% |
|
|
2) Small transfers |
|
|
3) CZPT -slip positive drive |
|
|
4) Very low belt mass for improved operating efficiency |
|
|
5) Accurate tracking |
|
|
6) Hygienic design, easy to clean, clean-in-place capability |
Typical materials Of Stainless Steel Flat Flex Wire Mesh CZPT Belt
1) AISI 314 (1150°C)
2) SUS 310S (1090°C)
3) SUS 330 (1150°C)
4) SUS 304 (870°C)
5) CZPT alloy Cr20Ni80 (1250°C)
6) CZPT ctrical furnace wire
7) SUS 321 (750°C)
8) SUS 410 (700°C)
9) SUS 430 (700°C)
10) Various metal materials as per your requirements
Flat Flex Wire Mesh CZPT Belt Specifications
| Material | SUS304/SUS316/SUS310 ETC |
| Width | 150 – 6000mm |
| Longitudinal Pitch | 4 – 20 mm or customized |
| Wire Diameter | 1.0 / 1.2 / 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.5 / 3.0 mm |
| Egde | Single Loop / Double Loops |
| Typical Applications | Drying, Enrobing, Battering, Cooking, Heating, Sieving ETC |
Typical applications Of Stainless Steel Flat Flex Wire Mesh CZPT Belt
With single layer structure and light weight, it is suitable for many processes in which the product should have as little contact with the conveyor belt as possible, such as:
Food industry: often used in light weight products processing – frying, freezing, heating, cooling, cooking, drying, baking, coating, enrobing and sterilization for desserts, pizza, vegetables, bread, flour cakes, meat, fish, candy, potatoes, biscuits, chocolate, nuts, fruit, etc. Like chocolate enrobing, battering and breading, freezing for seafood processing, frying chickens, cooling wafer after coating, pizza baking.
Electronics industry: printed circuit board required minimum contact support, melting, sold or drying welding.
Caps making industry: drying for drop plastic
Others, like textiles, glass heat treatment, printing and dyeing, radio, scientific research applications.
Widely used in the electronics industry, the solidification of the circuit board, solid fusion, drying, reflow soldering. Cap industry of plastic drying; for chocolate, biscuits, fish baked, frozen and dry, with B network edge can be used in food industry chain drive.
Application industry: mainly used in printing and dyeing, radio, electronic, food machinery and research units.
Stainless steel 304 metal flat flex used conveyor wire mesh belt conveyor systems price for pizza oven chocolate enrober bakery
Flat flex conveyor belts are mainly used for quick-frozen food, fried food, sugar machine, chocolate coating with a variety of bread and pastry food baking conveyor line. Flat flex conveyor belts are used in the food industry for the production of the following products: small dessert, fish products, pizza, vegetables, bread, flour, cakes, meat, candy, potatoes, biscuits, chocolate, nuts and fruit.
1) Cooking
2) Heating
3) CZPT
4) Drying
5) Coating
6) Freezing
7) Enrobing
8) Frying
9) Baking
10) Dough rolling
11) CZPT ering
12) Breading
13) Sterilization
14) Shrink-wrapping
15) Soldering
16) Shuttling
17) Turning
18) Side shifting
19) Collating
20) Crumbing
21) Searing
22) Glazing
23) Sieving
1.Funtions:
Flat flex conveyor belts are used in many industries.The belts have a light weight with single layer construction and are positively driven by sprockets. The belts have an open structure(70-85%open)and are frequently used in cooling, baking,draying heating,decorating,battering and packing machines for light products.
Flat flex belts are often used in conveyors for the food industry for the production of: snacks fish pizzas vegetables breadpastry -meat candy(small) potatoes biscuits chocolate nuts and fruits
2.Flat Flex Wire Mesh CZPT Belt Features:
- Smooth surface with CZPT shape.
- Long using life .
- Rust resistance .
- Corrosion resistance is strong.
- High strength, heat & erode- resistant.
- The capability of flexible and enduring.
- Permeability is well,not easy to out of shape.
3.Parameter:
Name:Flat flex conveyor belt
Materials:SS304,SS316
Pitch:4-20mm
Wire diameter :1-3mm
Overall width:100-4000mm
Special specifications are CZPT .
It can work with sprocket ,and we also can supply sprocket for you.
Sprocket size: keyway /keyway depth/bore diameter/overall diameter.
Flat Flex CZPT Belt Packing And Delivery
All Flat Flex CZPT Belts are checked by CZPT QC Department before delivering to CZPT CZPT ers.
Automatic S supplier kid/Pallet St price retch Film Wrap Pallet Wrapper Pallet Wrapping Machine
Product Description
Stretch film wrapping machine
1, project introduction:
The conveying roller will transport the pallet of products
to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically, after it, the pallets will be transported by conveying rollers. The procedure of next will be alike.
2, main technical data
2.1 technical date:
Pallet size: 2200×1500mm
Packing capacity:20 pallet/h
Requirement for packing: from one-third of 15cm pallet to the overtop of the load but not exceed 15cm.
Site: Indoor and proper temperature zoon.
Rotary speed: 15rpm(max)
2.2,packing material
Stretch film:3 inched diameter of the core,500mm in width, the diameter of the film is 260mm, film thickness:20-35μm
2.3, site preparation
Compressed air source:
pressure: 0.5-0.7 MPa
quality: no oil and water CZPT supply
Main CZPT : 380v(+/- 10%)/3 phase/50Hz(+/- 1Hz)
Power capacity: ≈3kw
3, supply range
3.1 CZPT matic online turntable film wrapping machine(1 set)
3.1.1 Turntable arm driving system(1set )
Motor & inverter, speed adjusted, and brake.
Turntable speed motor: SEW
Power: P=1.1KW
Turntable speed:n=10-15rpm(speed adjusted and brake)
3.1.2 film carriage parts(1set)
Carriage lifting driving by chains, stable.
Carriage lifting motor:
Access door for film thread: patent
Ratio of pre-strech1:1 : 2.5
Motor CZPT : 0.37kw
Lifting motor: SEW
3.1.3 safety guard fixture(1set)
There is a safety guard railing around the auto film attached and cut, when sb go into this area, the machine will stop working
Size of safety guard( standard by the drawing)
Ladder equipped with a machine for maintenance
There is a safety guard on the top also
3.1.4 film carriage (1 set)
Photoeye set for height measurement.
AC motor driving
AC motor CZPT capacity:0.37KW
Pre stretch1:1:2.5,film feed speed adjusted
Approaching switch will work for motor driving if there is no film break
3.1.5 CZPT film attached and cut (1 set)
Pneumatic system: SMC
3.2 Conveying roller (1 set)
capacity: 2000Kg
conveying speed: 10-15 m/min (can be incorporated with yours)
width of conveying machine: 1500mm
height of conveying machine: 500mm
Motor: SEW 0.75kw
Conveying back selected manually
Diameter of roller :Φ76mm
Distance between roller by roller:119mm conveying chains 10A sprocket gear Z=20
Treatment of surface of roller:zinc-coated steel
3.3 electrical system
PLC control, counts of wrapping can be set ;
Simens touch screen;
Photo-eye, automatic sensor height of load;
Bearing gear supply;
Man-machine interface;
Film carriage speed, film feeding speed can be adjusted and film breaking alarm.
Automatic and manual operation.
Alarm lamp indication
main electrical parts and spare parts
| PLC | SIEMENS |
| Touch screen | SIEMENS |
| inverter | SIEMENS |
| photo-eye | Panasonic |
| connector | Schneider |
| Cylinder | Festo |
| electromagnetic valve | Festo |
| limit switch | Omron D4D series |
| conveying roller | SEW |
| turntable motor | SEW |
| conveying motor | SEW |
| carriage lifting motor | SEW |
High-Q price uality Pallet Stretch Film Wrapping sales Machine Carton Box Packing Shrinkwrap
Product Description
Stretch film wrapping machine
1, project introduction:
The conveying roller will transport the pallet of products
to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically, after it, the pallets will be transported by conveying rollers. The procedure of next will be alike.
2, main technical data
2.1 technical date:
Pallet size: 2200×1500mm
Packing capacity:20 pallet/h
Requirement for packing: from one-third of 15cm pallet to the overtop of the load but not exceed 15cm.
Site: Indoor and proper temperature zoon.
Rotary speed: 15rpm(max)
2.2,packing material
Stretch film:3 inched diameter of the core,500mm in width, the diameter of the film is 260mm, film thickness:20-35μm
2.3, site preparation
Compressed air source:
pressure: 0.5-0.7 MPa
quality: no oil and water CZPT supply
Main CZPT : 380v(+/- 10%)/3 phase/50Hz(+/- 1Hz)
Power capacity: ≈3kw
3, supply range
3.1 CZPT matic online turntable film wrapping machine(1 set)
3.1.1 Turntable arm driving system(1set )
Motor & inverter, speed adjusted, and brake.
Turntable speed motor: SEW
Power: P=1.1KW
Turntable speed:n=10-15rpm(speed adjusted and brake)
3.1.2 film carriage parts(1set)
Carriage lifting driving by chains, stable.
Carriage lifting motor:
Access door for film thread: patent
Ratio of pre-strech1:1 : 2.5
Motor CZPT : 0.37kw
Lifting motor: SEW
3.1.3 safety guard fixture(1set)
There is a safety guard railing around the auto film attached and cut, when sb go into this area, the machine will stop working
Size of safety guard( standard by the drawing)
Ladder equipped with a machine for maintenance
There is a safety guard on the top also
3.1.4 film carriage (1 set)
Photoeye set for height measurement.
AC motor driving
AC motor CZPT capacity:0.37KW
Pre stretch1:1:2.5,film feed speed adjusted
Approaching switch will work for motor driving if there is no film break
3.1.5 CZPT film attached and cut (1 set)
Pneumatic system: SMC
3.2 Conveying roller (1 set)
capacity: 2000Kg
conveying speed: 10-15 m/min (can be incorporated with yours)
width of conveying machine: 1500mm
height of conveying machine: 500mm
Motor: SEW 0.75kw
Conveying back selected manually
Diameter of roller :Φ76mm
Distance between roller by roller:119mm conveying chains 10A sprocket gear Z=20
Treatment of surface of roller:zinc-coated steel
3.3 electrical system
PLC control, counts of wrapping can be set ;
Simens touch screen;
Photo-eye, automatic sensor height of load;
Bearing gear supply;
Man-machine interface;
Film carriage speed, film feeding speed can be adjusted and film breaking alarm.
Automatic and manual operation.
Alarm lamp indication
main electrical parts and spare parts
| PLC | SIEMENS |
| Touch screen | SIEMENS |
| inverter | SIEMENS |
| photo-eye | Panasonic |
| connector | Schneider |
| Cylinder | Festo |
| electromagnetic valve | Festo |
| limit switch | Omron D4D series |
| conveying roller | SEW |
| turntable motor | SEW |
| conveying motor | SEW |
| carriage lifting motor | SEW |
shop F price ully Automatic Pallet Box Film Stretch Wrapping Machine Stretch Film Pallet Wrapper
Product Description
Stretch film wrapping machine
1, project introduction:
The conveying roller will transport the pallet of products
to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically, after it, the pallets will be transported by conveying rollers. The procedure of next will be alike.
2, main technical data
2.1 technical date:
Pallet size: 2200×1500mm
Packing capacity:20 pallet/h
Requirement for packing: from one-third of 15cm pallet to the overtop of the load but not exceed 15cm.
Site: Indoor and proper temperature zoon.
Rotary speed: 15rpm(max)
2.2,packing material
Stretch film:3 inched diameter of the core,500mm in width, the diameter of the film is 260mm, film thickness:20-35μm
2.3, site preparation
Compressed air source:
pressure: 0.5-0.7 MPa
quality: no oil and water CZPT supply
Main CZPT : 380v(+/- 10%)/3 phase/50Hz(+/- 1Hz)
Power capacity: ≈3kw
3, supply range
3.1 CZPT matic online turntable film wrapping machine(1 set)
3.1.1 Turntable arm driving system(1set )
Motor & inverter, speed adjusted, and brake.
Turntable speed motor: SEW
Power: P=1.1KW
Turntable speed:n=10-15rpm(speed adjusted and brake)
3.1.2 film carriage parts(1set)
Carriage lifting driving by chains, stable.
Carriage lifting motor:
Access door for film thread: patent
Ratio of pre-strech1:1 : 2.5
Motor CZPT : 0.37kw
Lifting motor: SEW
3.1.3 safety guard fixture(1set)
There is a safety guard railing around the auto film attached and cut, when sb go into this area, the machine will stop working
Size of safety guard( standard by the drawing)
Ladder equipped with a machine for maintenance
There is a safety guard on the top also
3.1.4 film carriage (1 set)
Photoeye set for height measurement.
AC motor driving
AC motor CZPT capacity:0.37KW
Pre stretch1:1:2.5,film feed speed adjusted
Approaching switch will work for motor driving if there is no film break
3.1.5 CZPT film attached and cut (1 set)
Pneumatic system: SMC
3.2 Conveying roller (1 set)
capacity: 2000Kg
conveying speed: 10-15 m/min (can be incorporated with yours)
width of conveying machine: 1500mm
height of conveying machine: 500mm
Motor: SEW 0.75kw
Conveying back selected manually
Diameter of roller :Φ76mm
Distance between roller by roller:119mm conveying chains 10A sprocket gear Z=20
Treatment of surface of roller:zinc-coated steel
3.3 electrical system
PLC control, counts of wrapping can be set ;
Simens touch screen;
Photo-eye, automatic sensor height of load;
Bearing gear supply;
Man-machine interface;
Film carriage speed, film feeding speed can be adjusted and film breaking alarm.
Automatic and manual operation.
Alarm lamp indication
main electrical parts and spare parts
| PLC | SIEMENS |
| Touch screen | SIEMENS |
| inverter | SIEMENS |
| photo-eye | Panasonic |
| connector | Schneider |
| Cylinder | Festo |
| electromagnetic valve | Festo |
| limit switch | Omron D4D series |
| conveying roller | SEW |
| turntable motor | SEW |
| conveying motor | SEW |
| carriage lifting motor | SEW |
in Muzaffarnagar India sales price shop near me near me shop factory supplier Sprocket Carton Case Box Packer Chain Wheel Case Packing Machine with Gripper Pick and Place manufacturer best Cost Custom Cheap wholesaler
We have exported our items to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states of america, Canada, etc. The new goods incorporate a sequence of substantial-tech and large good quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, higher-velocity tooth chains, timing chains, self-lubrication chains, between which have variety large speed tooth chain for auto department dynamic box and aerial chains fill in the blanks of chain in China. makes certain the steadiness and regularity of the key perform of parts. Production Description:
|
EPTT Info |
|
|
Product Variety |
EPTT EPTT EPTT |
|
Application |
Glass bottle and pet bottles,tin cans. |
|
Purpose |
Packer is a fully automatic EPTT equipment which is utilized to put the container evenly into the plastic scenario or carton in a specific arrangement. |
|
Characteristics |
|
|
Use EPT PLC,Danfoss transducer. |
|
|
SchneiEPTTlow-voltage EPT EPTs and the SEW motor. |
|
|
Stable and trustworthy performance. |
|
|
EPTnical Parameters |
|
|
Manufacturing performance |
15/20cases/min |
|
EPTT of the EPTT EPTT |
three.7KW |
|
Input voltage |
380VAC 50HZ |
|
EPT air supply strain |
.five-.8Mpa |
|
Complete air Consumption |
.9m3/h |
|
Perform noise |
lt80DB |
FAQ
Q1:Are you producer or buying and selling company?
- EPT radic two. EPT business
We are manufacture verified by ALIBABA and we have our own layout group.
Q2:Where are you positioned? Is it hassle-free to pay a visit to you?
We are situated in ZheJiang . Visitors is extremely convenient.
Q3:How can you guarantee top quality?
one.We have concluded working method and procedures and we comply with them
quite strictly.
two.Our different employee is accountable for different functioning process, their operate
is verified,and will alwaEPTToperate this procedure, so very knowledgeable.
three.The EPT pneumatic components are from the world popular organizations,
these kinds of as Germany’s EPT, Japanese Panasonic and so on.
four.We will do rigid test working following the EPTT is completed.
A. Our company will check the items before shipping
B. Buyer inspection
C. 3rd-party inspection company
5.Our EPTTs are qualified by CE,SGS,ISO.
Q4:Can you design the EPTT in accordance to our needs?
Yes. We not only can personalize the EPTT according to your technical
drawing, but also can design and style new EPTT in accordance to your requirements.
Q5:Can you offer you overEPTT technological assist?
Yes. We can ship engineer to your organization to established the EPTT and practice your
employee if necessary.
If you have a lot more queries on our product, you should send us an inquiry in the below.
Typically, you will get reply in 24 hrs. Thank you!
in Nouakchott Mauritania sales price shop near me near me shop factory supplier Inquiry Conveyor System Plastic Machine Sprocket Square Hole Har900 manufacturer best Cost Custom Cheap wholesaler
We also can design and style and make non-common goods to satisfy customers’ particular needs. With detailed requirments, we can also create your unique designed merchandise. With EPG model registered in a lot more than 70 nations like The usa , Europe , Japan and so on, it has companions amongst globe leading enterprises, these kinds of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so on. Inquiry EPTT Method Plastic EPTT EPT Sq. Gap har900
Specification:
| Identify | Har900 EPTT Program Leveling Foot Basis EPTT Areas |
| EPT | Stainless steel/EPTT steel |
| Size | EPTT |
| Problem | EPTT |
| Application | Utilize for all kindly conveyor EPTT |
| Brand name | EPT |
| Area | ZheJiang metropolis,EPTT (Mainland) |
| Business Sort | EPT |
Solution present:
Main item:
| No | Solution | No | Item |
| one | Plastic modular belt | seven | Plastic fleXiHu (West EPT) Dis.ble EPT |
| two | Slat prime EPTs | eight | Multiflex conveyor EPTs |
| 3 | Stainless steel EPTs | 9 | Belt conveyor |
| 4 | EPTs | 10 | EPTT conveyor |
| 5 | Link Parts | 11 | All types of conveyors |
| 6 | Plastic comb boards | 12 | All components of conveyors |
EPTT Profile:
Why select Us:
1.We can offer plastic tobacco EPTT mat flat desk slat top miniature conveyor EPT belt areas producers conveyor drawing after confirm the specification.
two.We offer free of charge samples plastic tobacco EPTT mat flat table slat best miniature conveyor EPT belt parts makers for your tests.
3.We have been in plastic tobacco EPTT mat flat table slat prime miniature conveyor EPT belt elements producers subject for thirteen years,we are skilled.
four.We use foods quality raw material–Dupont Delrin from EPTTiwan,to make the plastic tobacco EPTT mat flat desk slat top miniature conveyor EPT belt areas producers.
five.Engineer fly to your internet site for manufacturing unit plHangEPT and installing if necessary.
6.We can provide diverse check certificate as your prerequisite,CE,Fda.
FAQ:
one.Q:Where is your manufacturing unit found? How can I go to there?
A:All our clients, from residence or abroad, are warmly welcomed to go to us, Before you check out our business, we can connect by telephone ! Our company is located in ZheJiang , EPTT, in close proximity to the ZheJiang XiHu (West EPT) Dis.hu (West EPT) Dis.ao Global Airport.
two.I never know what belt I currently use. Can you assist me identify my belt?
Our online belt identifier can aid you nEPT down the series and fashion of your current belt. If you want more specific information on plastic conveyor EPT belt parts companies, get in touch with me freely for plastic tobacco EPTT mat flat desk slat top miniature conveyor EPT belt elements companies.
three.What can you do If the items ended up damaged?
(1.)If goods have been damaged once you bougEPTT from me,I would substitute them freely for potato chips creation line alternative elements.
(two.)If the products ended up damaged when you used,We could offer five 12 months quality guarantee for plastic conveyor EPT belt areas producers unEPTTcommon doing work setting.
4.Does EPT give PDF data files of goods?
Indeed, in our down load cEPTTr you can locate PDF data files for a huge quantity of our goods bakery gear.
If you can not find what you are hunting for ,ship me your request by e mail.
Phone me maybe:
Cheap made in China – replacement parts – in Manama Bahrain Price 3D CNC Engraving Machine to Cut Plywood with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 diverse branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Equipment picture:
Characteristic for cnc router :
1) Using Professional Du EPT Amassing Program (for Reducing Wooden)
2)Innovative digit-control technique, manage operation and massive liquid crystal screen provides out far more practical operation, less difficult routine maintenance and more human mother nature on the layout of the equipment
3) The three axes use linearity square guidebook rail and generate which could meet up with distinct chopping demand from customers and has substantial slicing precision.
4) Unique smart calculation completely develops the possible of the electric machinery and qualified prospects to high velocity processing, the synchronization of curves and straight lines, smo EPT curves and race speed at 12m/min.
5) Large inside memory potential of 32M is capable to store thirty processing data files at the same time and open and approach any of them
6) This model uses domestic-top PCI managing system. It uses imported square form guide rail and the transmission is regular. It adopt high-precision stage equipment transmission, the optimum speed can reach 30m/m. It can engrave the graph of 1.5*1.5mm plainly.
7)It equipped with aluminum work desk with special layout, which can endure significantly excess weight. On the base of ZK-1325A, it utilizes the vacuum operate desk, which can adsorb the wooden dust, and make the setting clean. And it adopts a a lot more advance XYZ Vehicle-oil-feeding system.
Complex parameters
|
X,Y,Z Operating Spot |
1300*2500*200mm |
|
Shade |
White and Blue (can be Customized) |
|
Doing work Voltage |
220V/1PH/50Hz (choice) |
|
Table |
Aluminum T-slot table with PVC |
|
Manage Technique |
Copy Ncstudio control card system or D EPT optional |
|
Spindle |
HQD 3.2KW water cooling spindle |
|
Spindle Velocity |
600-24000RPM |
|
Inverter |
3.7 KW Xihu (We EPT Lake) Dis. inverter |
|
Push Motors |
450B Stepper Motor and Leadshine 860H |
|
Body |
EPT Type Weighty Obligation Body |
|
Lubrication |
Handbook Lubrication System |
|
Gantry structure |
Metal Gantry |
|
Choice |
Automated Oil Mi EPT Cooling |
|
X, Y Framework |
ZheJiang HIWIN square guide rails |
|
Z Framework |
TBI Ball Screw Ball Screw Transmission |
|
Instrument Sensor |
Semi-Automated Resource Sensor |
|
Limited Switch |
Japan Omron Minimal Switch |
|
Wire |
Higher Delicate Shjeld with Copper Wire to Safeguard Once more EPT Static Electric power |
Configuration equipment
Queries from customer:
Q1:Can you advise a wood functioning device to me,many thanks?
Indeed, In purchase to give you a appropriate cnc woodworking machine,p EPT explain to me the max doing work spot, materia EPT for
processing and the thickness for materia EPT processing engraving or reducing. Then perfect suitable machine will be advised
Q2:When the machine are unable to work well,What need to I do?
1. Engineer is on-line for 24hours, they can check out the difficulties and then give you a sulutions in two hours.
two. Our CNC machine is with one’s yr guarantee, If any problems of machine areas under “typical use”,new equipment parts will be despatched by air In cost-free.
three.You should re EPT certain that procedure CD and manual will be provided along with device,making you can run the equipment simply.
Our edge:
1. At the very same top quality grade, our products’ price is better.
2. At the exact same products’ cost stage, our service is far better
three.5-9 days delivery,One particular year’s guarantee.
four.Response in 2 hours
5.Regular Bundle box
7.CE,
8.English, Russian, Spanish are all supported
Sample photographs:
Package picture
If you are intrigued in our machine, welcome to speak to with me
The use of first tools manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our company and the detailed replacement components contained herein are not sponsored, approved, or produced by the OEM.
Vacuum made in China – replacement parts – in Zahedan Iran Table CNC Router Carving Milling Machine 1325 2030 Woodworking with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Vacuum desk cnc router carving milling equipment 1325 2030 woodworking
Normal LT-1325 Equipment specifics:
one). Functioning location: 1300*2500*200mm Aluminum T-slot desk with PVC
2). Machine composition Forged-iron construction
three). Xihu (We EPT Lake) Dis. rail: Hiwin linear square guide rail
4). Driving approach: X,Y axis by helicia gear rack, Z axis by TBI ball
5). Spindle: 3.0KW h2o cooling spindle(ER20)
six). Motors and motorists: 86BYG-450B stepper motors and MA860H Leadshine Driver
7). Handle method: NC studio manage method
eight). Computer software: Artcam
9). Device box
10). Tool sensor
Packing specifics: one plywood circumstance with drinking water-proof resources 1600mm*1300mm*1730 mm 400KGS
Optional:
1). Water tank(function for metallic and stone), it can cooling equipment, extand the also EPT life time
2). Rotary axis(engraver round wood): 80mm, 100mm and 150mm diameter.
three). Mach3 or D EPT handle method
Any EPT optional objects, you should let me know.
Parameter
|
Model No. |
LT-1325 Wood CNC Router |
|
Table Size |
1300mm*2500mm |
|
Max. feeding top of Z axis |
200mm |
|
Table Structure |
Vacuum desk with vacuum pump |
|
Equipment entire body |
Forged-iron |
|
X Y Z axis Transmission |
X,Y axis by helicia equipment rack, Z axis by TBI ball |
|
X Y Z Xihu (We EPT Lake) Dis. rail |
Hiwin linear square Xihu (We EPT Lake) Dis. Rail |
|
Spindle Power |
3.0kw drinking water cooling spindle |
|
Max.Spindle Speed |
24000 rpm/min |
|
Max. Traveling Speed |
25000mm/min |
|
Max. Working Speed |
12000mm/min |
|
Processing Accuracy |
±0.571mm |
|
Reposition Accuracy |
≤0.571mm |
|
Driving System |
Stepper motor 86BYG-450B and Leadshine motorists MA860H |
|
Command Language |
HPGL, G Code |
|
Control System |
NCSTUDIO/MACH3/DSP |
|
Working Voltage |
AC110/220V, 50/60HZ |
|
Net Weight/Gross Weight |
1350KGS |
|
Package Dimension |
3300x1950x1950mm |
Our company
ZheJiang Lintianzhiyuan CNC Equipment Co., Ltd. is famous in CNC and laser products, found in HangZhou, ZheJiang . Our company integrates the R&D, production, sale and routine maintenance providers. We rely on substantial-tech and large-high quality goods to create the world manufacturer.Our major merchandise: huge-scale (computerized instrument change) CNC woodworking engraving equipment, CNC marketing engraving equipment, CNC marble engraving device, CNC plasma slicing device, CNC glass engraving machine, CNC jade engraving machine, CNC metallic mould device, laser slicing equipment, laser reducing bed, laser seal engraving equipment and computer chopping plotter merchandise.
Good Comments
FAQ
1) This is the first time I use this kind of machine, is it easy operate?
There is English manual or guide video that show how to use machine.
If there is still have any question, we can talk from phone or Skype.
two)Can you recommend a CNC ROUTER MACHINE to me,many thanks?
Indeed, In order to give you a suitable router machine, pls tell me the max working area, materials
for processing and the thickness for materials processing engraving or cutting.
Then perfect suitable cnc router will be recommended
three) If machine have any problem after I ordered it, how could I do?
Free parts send to you in machine warranty period if machine have any problem.
Free after-sales service life for machine, please feel free contact us if your machine have
any problem.
we will give you 24hours service from phone and Skype.
Contact info:
The use of unique gear manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the listed substitute elements contained herein are not sponsored, approved, or created by the OEM.
Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Stainless chain and drive spray rocol in Samara Russian Federation Steel Industrial Transmission Roller Chain with High Tensile Strength for Driving Machine 20bss with ce certificate top quality low price
We – EPG Team the largest Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
The solution well shows environmental security and energy saving. Distributor We also can style and make non-normal merchandise to meet up with customers’ special needs. of precision roller chains produced from carbon steel. Available with .200 to 1.875 in. roller dia. Flat top, multi-flex and conveying chains are also supplied. Common strands have an even amount of pitches, pin back links, and roller hyperlinks. A roller chain strand can be shortened by taking away back links and lengthened by adding whole or a half back links (offset backlinks). Solution Description
1. StHangZhourd : ISO /DIN /ANSI
two. Model : twenty five-1 35-1 forty-1 fifty-1 sixty-1 eighty-1 100-1 120-1 one hundred forty-1 one hundred sixty-1 180-1 two hundred-1 240-1
04B-1 05B-1 06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1 28B-1 32B-1
Duplex, Triplex, Weighty duty and many others.
3.Materials : Alloy Metal & Stainless Steel
Transmission Roller Chain:
1.All areas are heat remedy(quenching and tempering) and controlled in a reasonable tolerance range.
2.Tensile power:15-twenty% larger than the stHangZhourd
3.Certificate of Good quality: ISO 9001:2000,SGS
4.Centreless grinding.
five.Good lubrication with outstanding grease.
6.Coloration:self,dim yellow,dark blue,black
Techncial Day
| Chain | Pitch | Roller | Width | Pin | Pin | Interior | Plate | Breaking | |
| N0. | diameter | between | diameter | length | plate | thickness | Load | ||
| interior plates | depth | ||||||||
| P | d1 | b1 | d2 | L | Lc | h2 | t/T | Q | |
| max | min | max | max | max | max | max | |||
| mm | mm | mm | mm | mm | mm | mm | mm | kN | |
| *25SS | 6.35 | 3.3 | 3.18 | 2.31 | 7.nine | eight.four | 6 | .8 | two.5/568 |
| *35SS | nine.525 | 5.08 | 4.77 | 3.58 | twelve.4 | 13.17 | 9.00 | one.30 | 5.5/1250 |
| 40SS | 12.700 | seven.95 | 7.85 | 3.96 | 16.6 | seventeen.8 | 12.00 | 1.50 | 9.6/2182 |
| 41SS | 12.700 | 7.77 | 6.25 | 3.58 | 13.75 | fifteen.0 | nine.91 | 1.30 | six./1360 |
| 50SS | 15.875 | 10.16 | nine.40 | five.08 | twenty.7 | 22.2 | fifteen.09 | 2.03 | fifteen.2/3455 |
| 60SS | 19.050 | 11.91 | 12.57 | 5.94 | 25.9 | 27.7 | 18.00 | two.42 | 21.7/4932 |
| 80SS | twenty five.four | 15.88 | 15.75 | 7.92 | 32.7 | 35.0 | 24.00 | three.25 | 38.9/8841 |
| 100SS | 31.750 | 19.05 | eighteen.90 | 9.53 | 40.4 | forty four.7 | thirty.00 | four.00 | 60./13636 |
| 120SS | 38.100 | 22.23 | 25.22 | eleven.10 | fifty.3 | 54.3 | 35.70 | 4.80 | seventy two.5/16477 |
| 140SS | forty four.450 | twenty five.40 | twenty five.22 | 12.70 | fifty four.4 | 59.0 | 41.0 | five.60 | ninety four./21363 |
| 04BSS | six.000 | 4.00 | two.80 | one.85 | six.8 | 7.eight | 5 | .six | two./455 |
| 05BSS | eight.000 | 5.00 | three.00 | two.31 | 8.20 | 8.9 | 7.10 | .80 | 3.5/795 |
| #06BSS | 9.525 | 6.35 | 5.72 | three.28 | thirteen.15 | fourteen.1 | 8.20 | one.30 | six.2/1409 |
| 08BSS | 12.700 | 8.51 | 7.75 | 4.45 | 16.7 | 18.2 | 11.80 | one.0 | twelve./2727 |
| 10BSS | fifteen.875 | ten.16 | 9.65 | five.08 | 19.5 | twenty.9 | 14.70 | one.70 | fourteen.5/3295 |
| 12BSS | 19.050 | twelve.07 | eleven.68 | 5.72 | 22.5 | 24.2 | 16.00 | 1.85 | 18.5/4205 |
| 16BSS | twenty five.400 | fifteen.88 | 17.02 | 8.28 | 36.1 | 37.4 | 21.00 | 4.fifteen/3.1 | 40./9091 |
| 20BSS | 31.750 | 19.05 | 19.56 | 10.19 | forty one.3 | 45.0 | 26.40 | 4.5/3..5 | 59./13409 |
| 24BSS | 38.one | twenty five.four | twenty five.40 | fourteen.63 | fifty three.4 | 57.8 | 33.20 | 6./4.8 | 104./25454 |
| 32BSS | 50.800 | 29.21 | thirty.99 | seventeen.81 | sixty six.0 | seventy one.0 | forty two.00 | 7./6.0 | one hundred fifty./34090 |
`Relevant Products
Stainless Steel Roller Chain Top Roller Chain with Nylon Material Top Roller Chain with Steel Maatrial Extend Pin Roller Chian
Production
Application
About Us
Kasin team was established in 1989, and its fir EPT item is casting carrier trolley for energy & free conveyor system. In 1995, EPT bought HangZhou Guoping Forging Manufacturing facility (LYGP), a marketer of forging bolts & nuts to electricity & free line market place in china. With this acquisition, EPT positioned itself as 1 of major areas suppliers of monorail and electricity & free conveyor technique in china.
In 2005, H&H Corp., a professional producer of large dimension conveyor chain, was acquired a portion as sharehould by Kasin, and labored as export window to all more than the entire world, especially bucket elevator chain, sugar mill chain, welded mill scaper chain.
In 2015, EPT set up by itself equipment company/ EPT machinery(ZheJiang )Co.,Ltd., created fleixible coupling, eg: FCL Coupling, NM Coupling, Curved Jaw Coupling, Chain Coupling andJaw Coupling.
These days, EPT is one of the bigge EPT specialist speciali EPT of EPT Course EPT Chain, Drop Cast Rivetless Chain, Forged Chain, Sugar Mill Chain, Bucket EPT Chain, Flexible Couplings and a hundred% to oversea marketplace, masking Japan, U.S. and Europ etc.
With the certification of ISO 9001 and GB/T 19001, EPT offer best top quality items at the reasonable price tag, to acquire-win situation in extended-terms cooperation, adhering to the slogan: “FIR EPT TIME, Every single TIME“.
Our mission is to supply highe EPT quality items at the be EPT possible value. And in undertaking so, to give an unmatched customer knowledge and to construct consumer tru EPT and satisfaction. Sincere, Quality, Efficient, Building, Safety the five essential factors constituting KASIN, which is the crucial motto for all of the EPT staff. As a result, we maintain striving to develop a corporate technique that is hugely appreciated and we hope that you continue to choose and use EPT goods with delight and pleasure.
Exhibition
Certificates
Our Provider
one. The queries about the coupling will be answered within 24 hours.
two. Update the procession of producing.
3. Our skilled engineer can reply technical questions,assist you fix technical troubles and help you decide on the mo EPT appropriate solution in accordance to your requirment.
four. Warranty 12 months: Free of charge alternative of faulty items inside of 12 months.
Packing Detai EPT & Delivery
Interior Packing: Carton, StHangZhourd export packing or According to customer’s prerequisite
Outer packing: wooden circumstances or In accordance to customer’s need
FAQ
Q: Are you buying and selling company or maker ?
A: We are professionally maker in China and very own ourself Forging & Casting-workshop, warmly welcome to check out our factory at any time.
Q: How long is your supply time?
A: Usually it is 5-10 times if the products are in stock. or it is 15-twenty five days if the items are not in inventory, it is according to quantity.
Q: Do you provide samples ? is it cost-free or additional ?
A: Indeed, it really is obtainable for EPT to submit sample for approval free of charge of cost, nonetheless it really is EPT regulation: for new potentioal client, sample is free but customer is responsilble for logistic fee.
Q: What is your terms of payment ?
A: a hundred% T/T before cargo after cargo inspect well
******************************************************************************************************
Follows Us:
EPT Industries(ZheJiang ) Co.,Ltd.
No.989,Guoshun Street, ZheJiang FengPu Industrial Park,
FengXian District, ZheJiang , P.R.China, 201400
Cell: +86~13083988828: 86~571-8822571/88220973-57152031 Fax: 86~571-8822571/88220973-57152030
Http://
The use of original products manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our company and the listed substitution elements contained herein are not sponsored, approved, or produced by the OEM.
