Tag Archives: sprocket hub

China Hot selling Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination

Product Description

Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field stamped idler Flame Cut Cast Iron Ladder Extended Pitch split hub taper lock Combination
Manufacturer of Sprocket, Chain sprockets, wheel and sprocket, drive sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, motorcycle sprocket and stainless steel sprocket, can interchange and replace with martin size sprocket, jt size sprockets, did size chain sprocket and so on.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

Can Ladder Sprockets be Customized or Modified for Specific Conveyor Configurations?

Yes, ladder sprockets can be customized or modified to fit specific conveyor configurations and meet the unique requirements of different industrial applications. Here are some ways ladder sprockets can be tailored for specific conveyor setups:

  • Size and Pitch: Ladder sprockets can be manufactured in various sizes and pitches to match the specific conveyor chain used in the system. Customizing the size ensures proper engagement and reliable power transmission.
  • Number of Teeth: The number of teeth on the ladder sprocket can be adjusted based on the application’s speed and torque requirements. More teeth can distribute the load across a larger area, while fewer teeth can provide higher speed capabilities.
  • Material Selection: Depending on the conveyor system’s operating environment and load capacity, ladder sprockets can be made from different materials, such as steel, stainless steel, hardened alloys, or high-strength engineering plastics.
  • Tooth Profile: The tooth profile of ladder sprockets can be customized for specific chain types or to optimize engagement and reduce wear on the chain links.
  • Hub Configuration: Ladder sprockets can be designed with different hub configurations to accommodate different shaft sizes, including through-bore hubs or taper-lock bushings.
  • Special Coatings: Sprockets can be coated with special materials like corrosion-resistant coatings or anti-friction coatings to enhance their durability and performance in challenging environments.
  • Attachment Options: In certain applications, ladder sprockets can be modified with custom attachments to suit unique conveyor configurations or facilitate the handling of specific products.
  • Design Modifications: Sprocket manufacturers can make design modifications based on specific application requirements, such as adding additional support structures or features to enhance chain engagement and stability.

Collaborating with experienced sprocket manufacturers or conveyor system experts is crucial when customizing ladder sprockets. Their expertise can help ensure that the modifications are well-suited for the application, comply with industry standards, and maintain the sprocket’s performance and longevity.

Customized ladder sprockets offer the advantage of tailoring the conveyor system to specific needs, maximizing efficiency, and extending the sprocket’s service life under the unique demands of the industrial operation.

ladder sprocket

Can Ladder Sprockets be Used in Curved or Inclined Conveyor Systems?

Yes, ladder sprockets can be used in curved or inclined conveyor systems, but certain considerations should be taken into account to ensure their effective performance in such configurations:

  • Curved Conveyor Systems: In curved conveyor systems, ladder sprockets must be designed to accommodate the curvature of the conveyor path. The sprocket’s tooth profile and dimensions should match the radius of the curve to ensure smooth chain engagement and prevent binding or misalignment.
  • Inclined Conveyor Systems: In inclined conveyor systems, the weight of the conveyed material and the inclination angle can impact the sprocket’s performance. Ladder sprockets used in inclined conveyors should have sufficient load capacity and be designed to handle the additional stresses imposed by the inclined operation.
  • Chain Type: The type of chain used in the conveyor system is critical for curved or inclined applications. Ladder sprockets should be matched with the appropriate chain type to ensure smooth motion around curves and proper engagement on inclines.
  • Number of Teeth: The number of teeth on the ladder sprocket affects the chain’s engagement and motion. In curved or inclined systems, sprockets with more teeth can help distribute the load more evenly and provide better chain support.
  • Customization: Depending on the specific curved or inclined conveyor configuration, ladder sprockets may need customization to fit the system’s unique requirements. Customized sprockets can address the curvature, inclination, and other factors to optimize conveyor performance.
  • Alignment and Tension: Proper alignment and chain tension are critical in curved and inclined systems to prevent misalignment, chain derailment, or excessive wear on the sprocket and chain. Regular maintenance and adjustments are necessary to ensure reliable operation.

It’s important to work with experienced conveyor system designers and sprocket manufacturers when implementing ladder sprockets in curved or inclined systems. They can help ensure that the sprockets are properly designed, sized, and aligned to meet the demands of the specific application.

By considering the unique challenges of curved and inclined conveyor systems and making appropriate adjustments, ladder sprockets can effectively contribute to the smooth and efficient operation of such conveyor configurations in various industries.

ladder sprocket

What are the Common Applications of Ladder Sprockets in Various Industries?

Ladder sprockets find a variety of applications in different industries where precise motion control, low noise, and high-speed operation are essential. Some common applications of ladder sprockets include:

  • Conveyor Systems: Ladder sprockets are widely used in conveyor systems, especially in high-speed conveyors. They ensure smooth and stable motion of the conveyor chain, minimizing chain slippage and maintaining accurate material handling.
  • Material Handling: In material handling equipment, such as bucket elevators, ladder sprockets provide reliable power transmission and guidance for the lifting and conveying of bulk materials.
  • Automated Assembly Lines: Ladder sprockets are employed in automated assembly lines to precisely control the movement of components or products during the manufacturing process.
  • Robotic Systems: In robotics and automated guided vehicles (AGVs), ladder sprockets are used to control the movement of robotic arms or wheels with high precision.
  • Food and Beverage Industry: Ladder sprockets are utilized in the food and beverage industry, particularly in conveyor systems for packaging, sorting, and transporting food products.
  • Printing and Packaging: In printing machines and packaging equipment, ladder sprockets facilitate accurate movement and synchronization of materials and products.
  • Textile Industry: Ladder sprockets play a role in textile machinery for the controlled movement of fabrics and threads during weaving, knitting, and other processes.
  • Agriculture: Ladder sprockets are used in agricultural equipment, such as harvesters and grain elevators, for handling and transporting crops.
  • Mining and Construction: In heavy machinery used in mining and construction, ladder sprockets contribute to reliable power transmission and precise motion control in conveyor and material handling systems.

The versatility and advantages of ladder sprockets make them suitable for a wide range of industrial applications. Their ability to guide and support the chain while minimizing noise and vibration makes them particularly valuable in industries where operational efficiency and safety are paramount.

When considering the use of ladder sprockets in specific industries, it is essential to understand the application requirements and consult with experts to ensure the correct selection and integration for optimal performance.

China Hot selling Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination  China Hot selling Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination
editor by CX 2024-03-27

China supplier Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination

Product Description

Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field stamped idler Flame Cut Cast Iron Ladder Extended Pitch split hub taper lock Combination
Manufacturer of Sprocket, Chain sprockets, wheel and sprocket, drive sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, motorcycle sprocket and stainless steel sprocket, can interchange and replace with martin size sprocket, jt size sprockets, did size chain sprocket and so on.

 

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?

When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:

  • Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
  • Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
  • Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
  • Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
  • Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
  • Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
  • Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.

It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.

Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.

ladder sprocket

How do I Identify Signs of Wear, Fatigue, or Damage in Ladder Sprockets, and When Should They be Replaced?

Regular inspection and maintenance are crucial to identify signs of wear, fatigue, or damage in ladder sprockets. Here are some common indicators that may suggest the need for replacement:

  • Worn Teeth: Examine the sprocket teeth for signs of wear. Worn teeth will appear shorter, narrower, or have a visibly different shape compared to new sprockets. Excessive wear can cause chain skipping or poor engagement.
  • Cracks or Fractures: Check for cracks or fractures on the sprocket body or teeth. Cracks can compromise the sprocket’s structural integrity and lead to failure under load.
  • Deformation: Look for any signs of deformation or bending on the sprocket body or teeth. Deformation can cause chain misalignment and premature wear on both the sprocket and chain.
  • Corrosion: In corrosive environments, check for signs of rust or corrosion on the sprocket’s surface. Corrosion can weaken the sprocket and affect its performance.
  • Uneven Wear: Uneven wear patterns on the sprocket teeth may indicate misalignment or inadequate lubrication. Addressing these issues promptly can extend the sprocket’s lifespan.
  • Noise and Vibration: Unusual noise or increased vibration during conveyor operation can be indicative of sprocket wear or misalignment.
  • Chain Damage: Inspect the conveyor chain for signs of damage, such as elongation, bent links, or kinks. Chain damage can be a result of a worn sprocket, and both components may need replacement.

As for the replacement timeframe, it varies depending on factors such as the application, load, operating environment, and maintenance practices. However, ladder sprockets should be replaced when:

  • The sprocket teeth are significantly worn, affecting chain engagement and performance.
  • Cracks or fractures are detected on the sprocket body or teeth.
  • Deformation or bending is evident, causing chain misalignment or operational issues.
  • Corrosion is extensive, compromising the sprocket’s structural integrity.
  • Uneven wear or noise/vibration issues persist, even after maintenance attempts.
  • The sprocket has reached its recommended service life based on industry standards or manufacturer guidelines.

Replacing ladder sprockets before significant wear or damage occurs is essential to avoid unexpected failures, downtime, and potential damage to other conveyor components. Regular inspections and proactive maintenance can help identify signs of wear or damage early on, allowing for timely replacement and ensuring the conveyor system’s safe and efficient operation.

ladder sprocket

How does a Ladder Sprocket Interact with the Conveyor Chain or Belt?

A ladder sprocket interacts with the conveyor chain or belt in a unique and precise manner, providing continuous support and guidance to facilitate smooth and reliable motion in conveyor systems. Here’s how a ladder sprocket interacts with the chain or belt:

  • Continuous Support: The ladder sprocket’s design consists of two parallel plates or bars connected by cross members, resembling a ladder. The chain links rest securely within the gaps between the cross members, providing continuous support throughout the sprocket’s rotation.
  • Engagement of Chain Links: As the conveyor chain moves along the conveyor path, it wraps around the ladder sprocket. The chain links fit into the gaps between the cross members, ensuring each link is held securely within the ladder sprocket’s structure.
  • Guidance: The ladder sprocket acts as a guide for the conveyor chain, preventing the chain from derailing or skipping off the sprocket during operation. The chain links remain confined within the cross members, maintaining correct alignment with the sprocket teeth.
  • Preventing Slippage: The ladder sprocket’s continuous support of each chain link minimizes chain slippage, ensuring accurate power transmission between the sprocket and the conveyor chain.
  • Accurate Motion: The ladder sprocket’s design provides consistent positioning and tension on the chain, contributing to smooth and precise motion. This is crucial for conveyor systems that require accurate material handling.
  • Reduced Noise and Vibration: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration levels during operation, promoting a quieter and more stable conveyor system.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems, as they can maintain chain stability and precise motion even at elevated speeds.

The interaction between the ladder sprocket and the conveyor chain or belt ensures that the chain remains properly engaged with the sprocket teeth throughout its movement. The ladder sprocket’s continuous support and guidance contribute to smooth material flow, reduced wear, and enhanced overall conveyor system performance.

When incorporating ladder sprockets in conveyor systems, it is vital to ensure proper sprocket and chain alignment, adequate lubrication, and periodic maintenance to maximize the system’s efficiency and longevity.

China supplier Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination  China supplier Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination
editor by CX 2023-12-15

China Professional Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination

Product Description

Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field stamped idler Flame Cut Cast Iron Ladder Extended Pitch split hub taper lock Combination
Manufacturer of Sprocket, Chain sprockets, wheel and sprocket, drive sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, motorcycle sprocket and stainless steel sprocket, can interchange and replace with martin size sprocket, jt size sprockets, did size chain sprocket and so on.

 

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Maintenance Requirements for Ladder Sprockets to Ensure Smooth Operation?

Maintaining ladder sprockets is essential to ensure smooth operation, prolong their service life, and prevent unexpected failures in conveyor systems. Here are the maintenance requirements for ladder sprockets:

  • Regular Inspection: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Inspect the sprocket teeth, cross members, and overall structure for any abnormalities.
  • Lubrication: Apply the appropriate lubricant to the ladder sprocket and the conveyor chain regularly. Proper lubrication minimizes friction, reduces wear, and ensures smooth motion and power transmission.
  • Tension Adjustment: Maintain the correct tension in the conveyor chain to prevent excessive wear on the sprocket teeth and chain links. Proper tensioning helps maintain accurate positioning and prevents chain slippage.
  • Chain Alignment: Ensure the conveyor chain is properly aligned with the ladder sprocket. Misalignment can cause uneven wear, increased friction, and reduce sprocket and chain life.
  • Cleanliness: Keep the ladder sprockets and the surrounding area clean from debris, dirt, and contaminants. Foreign particles can cause chain jamming, accelerated wear, and affect sprocket performance.
  • Replace Worn Sprockets: Monitor the wear of the ladder sprocket teeth regularly. If the sprocket teeth are significantly worn, chipped, or have hook-shaped profiles, replace the sprocket promptly to maintain proper chain engagement and prevent chain failure.
  • Inspect Chain Wear: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. Replace the chain if it is beyond its recommended service life, as a worn chain can accelerate sprocket wear.
  • Address Unusual Noises or Vibrations: Investigate and address any unusual noises or vibrations in the conveyor system promptly. Unusual sounds may indicate issues with the ladder sprockets or other components that require attention.
  • Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.

By adhering to these maintenance requirements, conveyor system operators can ensure the smooth operation and reliable performance of ladder sprockets. Regular maintenance not only extends the sprocket’s service life but also contributes to the overall efficiency and productivity of the conveyor system.

Proactive maintenance practices reduce the risk of unexpected downtime, equipment damage, and costly repairs, making it a worthwhile investment for any industrial operation that relies on conveyor systems with ladder sprockets.

ladder sprocket

How do I Identify Signs of Wear, Fatigue, or Damage in Ladder Sprockets, and When Should They be Replaced?

Regular inspection and maintenance are crucial to identify signs of wear, fatigue, or damage in ladder sprockets. Here are some common indicators that may suggest the need for replacement:

  • Worn Teeth: Examine the sprocket teeth for signs of wear. Worn teeth will appear shorter, narrower, or have a visibly different shape compared to new sprockets. Excessive wear can cause chain skipping or poor engagement.
  • Cracks or Fractures: Check for cracks or fractures on the sprocket body or teeth. Cracks can compromise the sprocket’s structural integrity and lead to failure under load.
  • Deformation: Look for any signs of deformation or bending on the sprocket body or teeth. Deformation can cause chain misalignment and premature wear on both the sprocket and chain.
  • Corrosion: In corrosive environments, check for signs of rust or corrosion on the sprocket’s surface. Corrosion can weaken the sprocket and affect its performance.
  • Uneven Wear: Uneven wear patterns on the sprocket teeth may indicate misalignment or inadequate lubrication. Addressing these issues promptly can extend the sprocket’s lifespan.
  • Noise and Vibration: Unusual noise or increased vibration during conveyor operation can be indicative of sprocket wear or misalignment.
  • Chain Damage: Inspect the conveyor chain for signs of damage, such as elongation, bent links, or kinks. Chain damage can be a result of a worn sprocket, and both components may need replacement.

As for the replacement timeframe, it varies depending on factors such as the application, load, operating environment, and maintenance practices. However, ladder sprockets should be replaced when:

  • The sprocket teeth are significantly worn, affecting chain engagement and performance.
  • Cracks or fractures are detected on the sprocket body or teeth.
  • Deformation or bending is evident, causing chain misalignment or operational issues.
  • Corrosion is extensive, compromising the sprocket’s structural integrity.
  • Uneven wear or noise/vibration issues persist, even after maintenance attempts.
  • The sprocket has reached its recommended service life based on industry standards or manufacturer guidelines.

Replacing ladder sprockets before significant wear or damage occurs is essential to avoid unexpected failures, downtime, and potential damage to other conveyor components. Regular inspections and proactive maintenance can help identify signs of wear or damage early on, allowing for timely replacement and ensuring the conveyor system’s safe and efficient operation.

ladder sprocket

What are the Advantages of Using Ladder Sprockets over Other Sprocket Designs?

Ladder sprockets offer several advantages over other sprocket designs, making them a preferred choice in certain applications where specific benefits are required. Here are the advantages of using ladder sprockets:

  • Continuous Chain Support: Ladder sprockets provide continuous support to the conveyor chain or belt. The chain links rest securely within the gaps of the ladder sprocket, ensuring reliable engagement and reducing the risk of chain derailment or slippage.
  • Smooth and Quiet Operation: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration during operation. This makes ladder sprockets suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems due to their ability to maintain chain stability and accurate motion even at elevated speeds.
  • Precise Motion Control: The ladder sprocket’s design provides continuous support and guidance to the chain, ensuring accurate positioning and minimizing chain whip or slack. This is crucial for applications that require precise motion control.
  • Low Maintenance: Due to the reduced chain wear and improved engagement, ladder sprockets may require less frequent maintenance compared to other sprocket designs, leading to lower overall maintenance costs.
  • Compatibility: Ladder sprockets are compatible with various chain types, providing flexibility in conveyor system design and offering options for different industrial applications.
  • Reduced Chain Wear: The continuous support and guidance provided by ladder sprockets result in reduced chain wear, extending the service life of the conveyor chain and sprocket.
  • Prevents Chain Jumping: The ladder sprocket’s design prevents chain jumping or skipping, ensuring continuous and reliable power transmission between the sprocket and the conveyor chain.
  • Enhanced Safety: With reduced chain slippage and improved engagement, ladder sprockets contribute to a safer conveyor system operation, minimizing the risk of unexpected failures.

It’s important to note that ladder sprockets may not be suitable for all applications, and the choice of sprocket design depends on specific requirements and operating conditions. Traditional toothed sprockets or other specialized sprocket designs may be more appropriate in certain scenarios.

When considering the use of ladder sprockets, it is essential to assess the application needs, conveyor system requirements, and consult with experts to make an informed decision for optimal performance and efficiency.

China Professional Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination  China Professional Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination
editor by CX 2023-09-25

China Good quality Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination

Product Description

Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field stamped idler Flame Cut Cast Iron Ladder Extended Pitch split hub taper lock Combination
Manufacturer of Sprocket, Chain sprockets, wheel and sprocket, drive sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, motorcycle sprocket and stainless steel sprocket, can interchange and replace with martin size sprocket, jt size sprockets, did size chain sprocket and so on.

 

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Maintenance Requirements for Ladder Sprockets to Ensure Smooth Operation?

Maintaining ladder sprockets is essential to ensure smooth operation, prolong their service life, and prevent unexpected failures in conveyor systems. Here are the maintenance requirements for ladder sprockets:

  • Regular Inspection: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Inspect the sprocket teeth, cross members, and overall structure for any abnormalities.
  • Lubrication: Apply the appropriate lubricant to the ladder sprocket and the conveyor chain regularly. Proper lubrication minimizes friction, reduces wear, and ensures smooth motion and power transmission.
  • Tension Adjustment: Maintain the correct tension in the conveyor chain to prevent excessive wear on the sprocket teeth and chain links. Proper tensioning helps maintain accurate positioning and prevents chain slippage.
  • Chain Alignment: Ensure the conveyor chain is properly aligned with the ladder sprocket. Misalignment can cause uneven wear, increased friction, and reduce sprocket and chain life.
  • Cleanliness: Keep the ladder sprockets and the surrounding area clean from debris, dirt, and contaminants. Foreign particles can cause chain jamming, accelerated wear, and affect sprocket performance.
  • Replace Worn Sprockets: Monitor the wear of the ladder sprocket teeth regularly. If the sprocket teeth are significantly worn, chipped, or have hook-shaped profiles, replace the sprocket promptly to maintain proper chain engagement and prevent chain failure.
  • Inspect Chain Wear: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. Replace the chain if it is beyond its recommended service life, as a worn chain can accelerate sprocket wear.
  • Address Unusual Noises or Vibrations: Investigate and address any unusual noises or vibrations in the conveyor system promptly. Unusual sounds may indicate issues with the ladder sprockets or other components that require attention.
  • Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.

By adhering to these maintenance requirements, conveyor system operators can ensure the smooth operation and reliable performance of ladder sprockets. Regular maintenance not only extends the sprocket’s service life but also contributes to the overall efficiency and productivity of the conveyor system.

Proactive maintenance practices reduce the risk of unexpected downtime, equipment damage, and costly repairs, making it a worthwhile investment for any industrial operation that relies on conveyor systems with ladder sprockets.

ladder sprocket

How do I Identify Signs of Wear, Fatigue, or Damage in Ladder Sprockets, and When Should They be Replaced?

Regular inspection and maintenance are crucial to identify signs of wear, fatigue, or damage in ladder sprockets. Here are some common indicators that may suggest the need for replacement:

  • Worn Teeth: Examine the sprocket teeth for signs of wear. Worn teeth will appear shorter, narrower, or have a visibly different shape compared to new sprockets. Excessive wear can cause chain skipping or poor engagement.
  • Cracks or Fractures: Check for cracks or fractures on the sprocket body or teeth. Cracks can compromise the sprocket’s structural integrity and lead to failure under load.
  • Deformation: Look for any signs of deformation or bending on the sprocket body or teeth. Deformation can cause chain misalignment and premature wear on both the sprocket and chain.
  • Corrosion: In corrosive environments, check for signs of rust or corrosion on the sprocket’s surface. Corrosion can weaken the sprocket and affect its performance.
  • Uneven Wear: Uneven wear patterns on the sprocket teeth may indicate misalignment or inadequate lubrication. Addressing these issues promptly can extend the sprocket’s lifespan.
  • Noise and Vibration: Unusual noise or increased vibration during conveyor operation can be indicative of sprocket wear or misalignment.
  • Chain Damage: Inspect the conveyor chain for signs of damage, such as elongation, bent links, or kinks. Chain damage can be a result of a worn sprocket, and both components may need replacement.

As for the replacement timeframe, it varies depending on factors such as the application, load, operating environment, and maintenance practices. However, ladder sprockets should be replaced when:

  • The sprocket teeth are significantly worn, affecting chain engagement and performance.
  • Cracks or fractures are detected on the sprocket body or teeth.
  • Deformation or bending is evident, causing chain misalignment or operational issues.
  • Corrosion is extensive, compromising the sprocket’s structural integrity.
  • Uneven wear or noise/vibration issues persist, even after maintenance attempts.
  • The sprocket has reached its recommended service life based on industry standards or manufacturer guidelines.

Replacing ladder sprockets before significant wear or damage occurs is essential to avoid unexpected failures, downtime, and potential damage to other conveyor components. Regular inspections and proactive maintenance can help identify signs of wear or damage early on, allowing for timely replacement and ensuring the conveyor system’s safe and efficient operation.

ladder sprocket

Can you Explain the Working Principle of a Ladder Sprocket in a Conveyor System?

In a conveyor system, a ladder sprocket operates based on the principle of guiding and supporting the conveyor chain to ensure smooth and reliable motion. Here’s a detailed explanation of the working principle:

  • Design and Structure: A ladder sprocket consists of two parallel plates or bars connected by cross members. The cross members have gaps between them, allowing the chain links to rest securely within the gaps.
  • Chain Engagement: The conveyor chain moves along the conveyor path and wraps around the ladder sprocket. As the chain travels, the chain links fit into the gaps between the cross members, resulting in continuous support and engagement of the chain with the sprocket.
  • Guiding the Chain: The ladder sprocket guides the conveyor chain, preventing it from derailing or skipping during operation. The chain links are confined within the cross members, which helps maintain the chain’s correct alignment with the sprocket teeth.
  • Preventing Chain Slippage: The ladder sprocket’s design ensures that each chain link is securely held within the cross members. This prevents chain slippage and ensures accurate and consistent power transmission between the sprocket and the conveyor chain.
  • Smooth Motion: The ladder sprocket’s continuous support of the chain links provides smooth motion without significant chain whip or slack. This is crucial for conveyor systems that require precise and consistent movement of materials.
  • Low Noise and Vibration: Due to the chain’s secure engagement and reduced slippage, a ladder sprocket contributes to low noise and vibration levels in the conveyor system, making it suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems, ensuring stable and accurate motion of the chain even at elevated speeds.

Overall, the working principle of a ladder sprocket in a conveyor system revolves around guiding, supporting, and engaging the conveyor chain to facilitate smooth and reliable material handling. The ladder sprocket’s unique design provides advantages in certain applications where precise motion control, low noise, and high-speed operation are essential.

When incorporating ladder sprockets into conveyor systems, it is crucial to ensure the proper selection and alignment of the sprocket with the chain to achieve optimal performance and longevity of both the sprocket and the conveyor system.

China Good quality Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination  China Good quality Environmental Chain Sprocket Free Flow Conveyor Salt Spreader Oil Field Stamped Idler Flame Cut Cast Iron Ladder Extended Pitch Split Hub Taper Lock Combination
editor by CX 2023-08-04

China factory 10B Single plate with hub Stainless Steel Taper Bore machine Chains and Sprocket sprocket bar

Warranty: 3 years
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company
Customized support: OEM, ODM, OBM
Material: Stainless Steel, C45 Steel…, Carbon Steel, Stainless Steel, Cast Iron
Standard: ISO/DIN/ANSI
Certificate: ISO9001:2008
Range of Application: Power Transmission Equipment
Package: Per requirement
Size: 08B 10B 12B 16B ……
Type: Sprockets Chain Wheel
Product Name: sprockets& platewheel
Surface treatment: customized
Certification: pcoc, Reach, IECEE, scoc, EPA, GS
Packaging Details: Inner packing: plastic bag/carton box Outer packing: wooden case

008B Single Stainless Steel Taper Bore with hub machine Chains and SprocketA sprocket is a profiled wheel with teeth that meshes with a chain, track or other perforated or indented material. It is distinguished from a gear in that sprockets are never meshed together directly, and differs from a pulley in that sprockets have teeth and pulleys are smooth.
SIZE:

A. American Series Sprockets
Stock Sprockets ( A type and B type)ASA25, ASA35, ASA35-2, ASA35-3, ASA41, ASA40, ASA40-2, ASA40-3, ASA50, ASA50-2, ASA50-3, ASA60, ASA60-2, ASA60-3, ASA80, ASA80-2, ASA80-3, ASA100, ASA100-2, ASA100-3, ASA120, ASA120-2, ASA140, ASA140-2, ASA160, ASA160-2, ASA180, 08B10SS Chain Wheel Stainless Steel Roller Chain and Sprocket ASA200, ASA200-2
BS type SprocketsASA35, ASA35(HT), ASA41, ASA40, ASA40(HT),ASA50, ASA50(HT), ASA60, ASA60(HT), ASA80, ASA80(HT), ASA80(W), ASA80-2, ASA100
Double Pitch Sprockets2040&2042, 2050&2052, 2060&2062, 2080&2082
Single Double Sprockets ASA40, ASA50, ASA60, ASA80, ASA100
Stainless Steel SprocketsASA25,nbsp; ASA35, ASA40, ASA50, ASA60
Taper bore and QD sprocketsASA35-1(Taper, QD), ASA35-2(QD),ASA35-3(QD), ASA40-1(Taper, QD), ASA40-2(QD, Taper), ASA40-3(QD), ASA41(QD), ASA50-1(QD, Taper), ASA50-2 (QD, Taper), ASA50-3(QD), ASA60-1(QD, Taper), ASA60-2(QD, Taper), ASA60-3, ASA80-1(QD, Taper), ASA80-2(QD, Taper), ASA80-3(QD), ASA100(QD, Yin Yang Couple Friendship Bracelets and necklace Handmade Tai Chi Charm Adjustable Rope Bracelets For Gifts Taper) ASA100-2(QD), ASA100-3(QD),ASA120-1(QD, Taper), ASA120-2(QD), ASA140(QD, Taper), ASA140-2(QD), ASA160(QD, Taper), ASA160-2(QD), ASA200(QD)
OthersType C Sprockets ( American Standard)
Weld on Hubs and Weld-on Sprockets ( American Standard)
Double Pitch Sprockets Stainless Steel ( American Standard)
Any non-standrad sprockets
B. European Series Sprockets
Standard Sprockets and Plate wheels SprocketsSPROCKETS P5, SPROCKETS P6,SPROCKETS 1/4X1/8, P8, SPROCKETS 06B,SPROCKETS 081-1,SPROCKETS 083-1,SPROCKETS 1/2X1/4(R7.75), 1/2X1/4(R8.51),SPROCKETS 08B,10B, SPROCKETS 12B,SPROCKETS 16B, SPROCKETS 20B,SPROCKETS 24B, SPROCKETS 28B,32B
Plate wheels P5, P6, 1/4X1/8, P8, 06B,081-1,083-1,1/2X1/4(R7.75),1/2X1/4(R8.51), 08B,10B,12B, 16B, 20B, 24B,28B,32B
Finished Bore Sprockets 06B, 08B, 10B, 12B, 16B
Taper Bore Sprockets06B, 08B, 10B, 12B, 16B,20B
Sprockets for 2 Single Roller Chains ( SD Type) 06B, 08B, 10B, 12B, SWC285DH2 short flex welding type universal coupling Factory direct sale Cardan shaft High Quality Double universal joint 16B
Plate wheels for Conveyor Chains P20, P30, P50, P75, P100
Cast iron Sprockets06B, 08B, 10B, 12B, 16B, 20, 24B
othersStainless Steel Sprockets ( European Standard)
Idler Sprockets (European Standard)
Table Top Wheels ( European Standard)
Any non-standrad sprockets

DETAILS:
1. Material: Carbon Steel, Stainless Steel, Hardend & Tempered Steel, Cast Iron, Copper, Brass etc.
2. Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching etc.
3. Surface Treatment: Galvanizing/Zinc Plating, Dacrotized, Black Anodic Treatment, Spray Printing, Mirror Finish, Burnishing, Sand-blasting……
4. Inspection: All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that best quality product goes out in the market.
5. Durable, Good Wear Resistance
6. Good quality with reasonable price, timely delivery and great customer service.
chain sprocket chain sprocket Steel 3/8″ x 7/32″ Roller Chains Sprocket
Steel 3/8″ x 7/32″ Roller Chains Sprocket
Packaging & Shipping Package: Standard suitable package / Pallet or container Polybag inside export carton outside, blister and Tape and reel package available.
If customers have specific requirements for the packaging, we will gladly accommodate
Shipping: 10-20working days ofter payment receipt comfirmed (based on actual quantity) Packing standard export packing or according to customers demand
Professional goods shipping forwarde

About MIGHTY

Exhibition
Advantages1. Factory directly supply , we can continue to provide a stable supply 2. Many years manufacture experience , top quality guaranteed by skilled workers, managing system and status of facilities.3. Competitive and reasonable price 4. OEM service, we can do as your drawings or samples 5. Quality Guarantee, 100% inspect before delivery6. Good after-sale service, Our wokers are all professional and all can speak English. 7. Timely delivery, We have many long cooperation supplier. supply ONE-STOP service8. High-tech CNC Machines9. Independent Engineering Department
10.Kinds of surface treatment—Zinc Plating, Powder Coating, Anodizing, Chrome Plate, RoHs .etc .

FAQQ: How long can I get reply after send inquiry?
A: All inquiries will be replied within 12 hours, also you may call us at any time. Q: How soon can I get sample ?
A: Generally standard sample can be send out within 7days, and for the customize parts, it will depond on the detail requirment. Q:What information should I give to you for inquiry?
A:Pls send the detail of the specification and QTY, also specail demands etc, and it’s better you can send us the detail drawings or catalogue.
Q: If I don’t have drawing or catalogue, how can I get sample ?
A:If you don’t have the drawing or catalogue, you can send us your sample, so we can make the drawing and sample accordingly.Q:What is the Warranty for your products?
A:Normally our warranty is 1 year.
Contact us
What are your waiting for? fill out the inquiry form bellow and click send to us, Rubber Cushion Tyre Coupling Any question or inquiry, we will reply you within 12hours!

sprocket

How to Identify a Sprocket

When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.

buy sprockets

When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.

Identify sprockets

One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
sprocket

Replace sprocket

If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.

Replace worn chains

To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.

Check the sprocket for rust

One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
sprocket

Replace worn sprockets

You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.

China factory 10B Single plate with hub Stainless Steel Taper Bore machine Chains and Sprocket   sprocket barChina factory 10B Single plate with hub Stainless Steel Taper Bore machine Chains and Sprocket   sprocket bar
editor by Cx 2023-07-12

China 13 Tooth Motor Sprocket Pinion Gear 12 x 18 Bicycle Chain Motor Sprocket 11mm Bore with Key Pin Electric Bicycle Parts a hub sprocket

Relevant Industries: Producing Plant, Machinery Mend Shops, Farms, Printing Shops
Substance: hardened metal
Regular: ISO
Tooth amount: thirteen
Fit Chain: 1/two
Pitch(mm): 12.7
Thickness (mm): three
Interior gap Diameter (mm): 11
Outer Diameter(mm): fifty eight
Suitable with: 1016Z2 1016Z3 1018
Peak(mm): nine
Crucial pin width(mm): four
Packaging Particulars: pp pag, carton

thirteen Tooth Motor Sprocket Pinion Gear 1/2″ x 1/8″ Bicycle Chain Motor Sprocket 11mm Bore with Crucial Pin Electric Bicycle Parts Teeth 13Fit Chain 1/2 x 1/8 ChainPitch(mm) twelve.7Tooth Thickness 3mmInner gap Diameter D1(mm) 11Height(mm) 9Outer Diameter(mm) 58Key pin width(mm)  4Compatible with Motor 1016Z 1018  Our Manufacturing facility HangZhou Yuan Jun Trade Co., Ltd. is a specialized supplier of electric scooter equipment, electrical bicycle components, Adaptable shaft coupling setscrew sort spiral coupling Large Quality one-piece metallic spring connector electricity transmission athletics items, such as kick scooters, skateboards. We have been devoted to this location for far more than 2 years, positioned in the Hardware Hometown–HangZhou, ZHangZhoug, China. We have great high quality and competitive cost for our products. Our lengthy-expression romantic relationship with customers in North America, Europe, Australia and Asia has provided us familiarity with numerous markets. For that reason we can simplify your international sourcing experience. You are welcome to cooperate with our company. FAQQ: What is your payment conditions?A1: When buy amount considerably less 5000USD, 100% TT Advance.A2: When over 5000USD, 50% deposit,equilibrium just before cargo by TT.A3: Except the TT, we also accept L/C,Western union, Versatile shaft coupling setscrew type spiral coupling Higher Good quality 1-piece metallic spring connector electricity transmission paypal, moneygram. Q: What is your shipping and delivery time?A1: For inventory objects, shipping time all around 7daysA2: For tiny purchase widespread item, delivery time about 7-15daysA3: For Mass buy common product, shipping and delivery time around 20-30daysA4: For particular making product, for each the real scenarios mentioned with our income man or woman. Q: Can you offer you OEM or ODM?A:Sure,we can! But we require shopper offer very clear drawing or sample. Q: Can you organization offer you door to doorway service?A:Yes,we can offer you the doorway to door services not only specific,also sea cargo.  GR42 GR48 GR55 GR65 GR75 CZPT Spider Flexible Shaft Couplings PU TPU Rubber Coupling Aspect Q: What is your shipment method?A: We ship by Categorical FEDEX, UPS, DHL, EMS, ARAMEX. All specific freight is billed in your finish.

Shipping (Typically arrive port time in doing work days)
Vacation spot Categorical/CourierDHL/FedEx/TNT/UPS Ship via sea Ship by way of air Ship by way of EMS Ship via ePacket
North America three-7 days fifteen-24 days 5-8 days seven-twelve days 8-15 days
South America 3-7 times 15-25 days 5-8 days seven-12 times ten-fifteen days
European international locations 3-7 times 20-30 days five-8 times 7-12 days eight-fifteen days
Africa nations around the world three-7 times forty five-50 days five-8 days seven-twelve times 10-15 days
The Center East 3-7 days fifteen-25 days 5-8 days 7-12 days 8-fifteen times
Australia three-7 times ten-15 days 5-8 times seven-12 times 8-15 days

sprocket

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China 13 Tooth Motor Sprocket Pinion Gear 12 x 18 Bicycle Chain Motor Sprocket 11mm Bore with Key Pin Electric Bicycle Parts     a hub sprocketChina 13 Tooth Motor Sprocket Pinion Gear 12 x 18 Bicycle Chain Motor Sprocket 11mm Bore with Key Pin Electric Bicycle Parts     a hub sprocket
editor by Cx 2023-06-28

China 1.60 x 17 inch Rear Rims Aluminum Alloy Circle Of17 Wheel with Disc Brake Sprocket for KLX CRF Kayo Apollo BSE Dirt Pit Bike a hub sprocket

Design Variety: None
Warranty: None
Origin: CN(Origin)
Merchandise Peak: 12inch
Item Length: 17inch
Content Type: alloy 6000
Item Sort: Rims
Merchandise Fat: 3.46kg
Item Width: 17inch
Model Identify: 17inch
Product Diameter: 1.5inch

1.sixty x seventeen” Female Elegant twelve Zodiac CZPT Zodiac Necklace Stainless Steel Pendants Appeal Gold Chain Choker Astrology Necklaces inch Rear Rims Aluminum Alloy Circle Of17″ Aluminium Adaptable Shaft Coupling Wheel with Disc Brake Sprocket for KLX CRF Kayo Apollo BSE Dirt Pit Bicycle

sprocket

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China 1.60 x 17 inch Rear Rims Aluminum Alloy Circle Of17 Wheel with Disc Brake Sprocket for KLX CRF Kayo Apollo BSE Dirt Pit Bike     a hub sprocketChina 1.60 x 17 inch Rear Rims Aluminum Alloy Circle Of17 Wheel with Disc Brake Sprocket for KLX CRF Kayo Apollo BSE Dirt Pit Bike     a hub sprocket
editor by Cx 2023-06-15

China wholesaler China Industrial Transmission Gear Reducer Conveyor Parts High-Intensity and High Wear Resistance Roller Chain ANSI DIN ISO JIS Standard Hub Sprockets best sprocket combination

Product Description

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

INSTALLATION AND USING

The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

After-sales Service: 7*24hours
Warranty: 1 Year
Manufacturing Process: Forging
Surface Treatment: Polishing
Operation Pressure: Atmospheric Pressure
Material: Alloy
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China wholesaler China Industrial Transmission Gear Reducer Conveyor Parts High-Intensity and High Wear Resistance Roller Chain ANSI DIN ISO JIS Standard Hub Sprockets     best sprocket combinationChina wholesaler China Industrial Transmission Gear Reducer Conveyor Parts High-Intensity and High Wear Resistance Roller Chain ANSI DIN ISO JIS Standard Hub Sprockets     best sprocket combination
editor by CX 2023-05-29

China high quality Lr1250 Crawler Crane Sprocket a hub sprocket

Product Description

LR1250 Crawler Crane Sprocket

Technical details
 

Product Name LR1250 Crawler Crane Sprocket
Material 35SiMn
Process Technology Casting
Means of Transport Ocean,Land,Air
Port HangZhou, HangZhou, HangZhou
Packing way Pallet

Related Products For LR1250 Crawler Crane

LR1250 Track Shoe (Track Pad / Track Plate)

Specifications
ZheJiang Value Machinery Parts CO.,LTD aim to supply best quality undercarriage parts for our customer, mainly for Hitachi, Sumitomo, Kobelco, IHI, CZPT Sharyo, CZPT Sumitomo, Sany, Fuwa, Zoomlion, American, CZPT Demag, CZPT American, Manitowoc, Link-Belt and so on brands crawler cranes.

Hitachi
KH70 KH100 KH100-1 KH100D KH125 KH125-2 KH125-3
KH150 KH150-2 KH150-3 KH180 KH180-2 KH180-3 KH230
KH230-3 KH250HD KH300 KH300-2 KH300-3 KH500-2 KH500-3
KH700-2 KH850 KH850-3 KH1000 U106A TH55 CX300
CX350 CX500 CX550 CX650 CX700 CX900 CX1000
CX1100 CX1800 CX2000 PD7 PD100 CD1500 CD2000
Sumitomo
SC350 SC400 SC400-2 SC500 SC500-2 SC500-3 SC550-2
SC650 SC650-2 SC650DD-2 SC650-3 SC700 SC700-2 SC800
SC800HD SC1000 SC1000-2 SC1500-2 LS78RH LS78RM LS78RH5
LS78RHD5 LS98 LS108RH5 LS100C LS118RH3 LS118RH5 LS118RH6
LS118RM LS120RH5 LS138H LS138RH5 LS208H LS218H LS218RH5
LS238RH2 LS238RH3 LS238RH5 LS248RH5 LS458HD LS468HD LS518
LS528 LS528-S SD205 SD307 SD407 SD510 SD610
Kobelco
P&H60P P&H70P P&H75P P&H100P P&H315 P&H320 P&H325
P&H330 P&H335 P&H335AS P&H345 P&H440 P&H550A P&H550-1
P&H550-2 P&H550S P&H5035 P&H5045 P&H5055 P&H5100 P&H7035
P&H7045 P&H7050 P&H7055 P&H7065 P&H7070 P&H7080 P&H7090
P&H7100 P&H7120 P&H7150 P&H7200 P&H7250 P&H7250-2 7300
FS80 FS90 BM500 BM600 BM650 BM700 BM700HD
BM750 BM800 BM800HD BM900 BM900HD BM1000HD BM1200
CKS600 CKS2500 CKE600 CKE700 CKE700-1 CKE800 CKE850
CKE900 CKE1000 CKE1100 CKE1350 CKE1800 CKE2000 CKE2500
CKE2500-2 CK800 CK850 CK1000 CK1000G CK1600 CK2000-2
CK2500 SL4500 SL6000 TK350 TK750 TK550  
IHI
CH350 CH500 CCH250W CCH280W CCH350 CCH350-D3 CCH400
CCH500 CCH500-2 CCH500-3 CCH500-T CCH550 CCH650 CCH700
CCH800 CCH800-2 CCH1000 CCH1000-5 CCH1200 CCH1500 CCH1500HDC
CH1500-2 CCH1500E CCH2000 CCH2500 CCH2800 DCH650 DCH700
DCH800 DCH1000 DCH1200 DCH6571 DCH15030 DCH2000 K300
K400A K400B K1000        
Nippon Sharyo
DH300 DH308 DH350 DH400 DH408 DH500 DH508
DH558 DH600 DH608 DH650 DH658 DHJ60 DH60-120M
DH650 DH800 DH900-5 DH900D DH700 DHP70 DHP80
ED4000 ED5500          
 
SCC500B SCC500C SCC500D SCC500E SCC550C SCC600C SCC750C
SCC800C SCC1000D SCC1250 SCC1500CC SCC1500D SCC1800 SCC2600A
SCC3000WE SCC4000E SCC5000WE SCC6500E SCC7500 SCC8100 SCC8200
SCC8300 SCC10000 SCC16000        
Fuwa
CC40 QUY35  QUY50  QUY50A  QUY50C  QUY50D QUY50S
QUY70 QUY70A  QUY80  QUY80A  QUY80B QUY90  QUY100
QUY100A  QUY120  QUY130  QUY130A  QUY150  QUY150A  QUY150C
QUY250  QUY320 QUY400  QUY400A  QUY500  QUY650  QUY750
 QUY1250 FZX36  FC80B        
Manitowoc
2900wc 3900 4100 10000 11000-1 14000 777S2
888 16000 BRS 3000        
Terex Demag
CC400 CC1100 CC1500 CC1800 CC2000 CC2200 CC2400-1
CC2500 CC2500-1 CC2800 TCC40 TCC 45 TCC60  
Link-Belt
LS108BS LS108B LS108BJ LS118 LS138H LS138HII LS218
LS248 LS318 LS338 LS418 LS518    
Terex American
HC50 HC60 HC80 HC110 HC165 HC230 HC275
HC285            
American
American 9299 American 9310 900 Serial 7250 7260 9270 4250
4260 5220 5299 5300 599C 597C 595C
Hitachi Sumitomo
SCX300 SCX300-C SCX400 SCX500 SCX550E SCX700 SCX700-2
SCX700HD SCX800 SCX800-2 SCX800HD SCX800HD-2 SCX900 SCX900-1
SCX900-2 SCX900HD SCX900HD-1 SCX900HD-2 SCX1000 SCX1200 SCX1200-2
SCX1200-3 SCX1200HD SCX1200HD-2 SCX1500 SCX1500-2 SCX2000 SCX2000HD
SCX2500 SCX2500LF SCX2600 SCX2800-2 SCX3500 SCX5000 SCX6500
6000SLX 6000SLX 6000SLX 218HSL SDX207 SDX5571 MX8030B
MH5510B MX6515B SP110 SP135 PD135    
Zoomlion
QUY50 QUY65 QUY70 QUY200 QUY260 QUY650 ZCC550H
ZCC800H ZCC1100H          

Application
LR1250 Crawler Crane

About US
Mass stock —
In order to realize the immediate delivery, we prepared a large range stock. Plus, Our warehouse in HangZhou, which are near HangZhou port. It can save the maximum level of transit time.
Pre-sales & After sales —
All the sales man are professional. We work closely with our customers and pride ourselves on providing a complete service. The aim of sales man is to assist clients, find everything they need fast. We are always on hand to give you the best advice and assistance: specialized staff, available 24 hours a day, 365 days a year. 
Experience — 
As the leader of the field, our company has more than 20 years experience. It is realizable for our customers to have one-stop shopping. That means you can save much time.
Our technicians have rich experience, using the most advanced CAD technologies to make engineering drawings. Besides, “Give US drawings, Give your products” – we can produce according to your drawings.

With the rich experience and strong team here, we kept long-term cooperation with CZPT customers. We export to Southeastern Asia, Russia, Europe and America.  We are constantly devoted to perfecting quality system, and enhancing the quality of products. We are so sure that you can not find a better crawler crane undercarriage parts supplier anywhere. Kindly notify us if you are interested in our products.

 

Type: Crawler
Application: Hoisting Machinery
Certification: CE
Condition: New
Warranty Time: 2500 Working Hours
Technique: Forging/Casting
Samples:
US$ 400/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China high quality Lr1250 Crawler Crane Sprocket     a hub sprocketChina high quality Lr1250 Crawler Crane Sprocket     a hub sprocket
editor by CX 2023-05-22

China 1045# steel high quality motorcycle linked chain sprockets for bajaj pulsar motorcycle from China manufacturer a hub sprocket

Error:获取返回内容失败,
Your session has expired. Please reauthenticate.

sprocket

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China 1045# steel high quality motorcycle linked chain sprockets for bajaj pulsar motorcycle from China manufacturer     a hub sprocketChina 1045# steel high quality motorcycle linked chain sprockets for bajaj pulsar motorcycle from China manufacturer     a hub sprocket
editor by Cx 2023-05-09