Tag Archives: standard sprocket

China Standard 80417785 Agricultural Chain Sprocket for Combine Harvest

Product Description

 Agricultural Chain Sprocket For Combine Harvest

Characteristic

Choosing a chain sprocket for your combine can be an overwhelming task. There are many things to consider, including the Div. dividers, wear points, and RPM measurement. Fortunately, this article can help you make the right choice. We’ll cover the important factors to look for in a chain sprocket and why they’re important. Buying a new chain sprocket for your combine harvest is an investment that will pay off.
Island design
An island design chain spiket for a combine harvester is a highly useful agricultural product that ensures proper transmission of torque from the engine to the working units. The chain spiket is made of steel and cast iron and features a complex spatial form with a central hole, fastening elements, and special coating. Its durability is increased by its easy removal and replacement process. It is compatible with CR and CH Series combine harvesters.
RPM measurement
The rate of work and quality of the TX36 are compared in the following table. Operator safety, suitability of the operator manual, and mechanical breakdowns are also compared in this table. In addition, a side slope test was performed at 5deg (8%) and 8.8% to measure the combine’s performance on non-level surfaces. The results of these tests will help you determine whether the combine harvester is a good fit for your operations.
The operator’s cab on the TX36 is positioned on the combine’s body ahead of the grain tank. The ladder is narrow and may be difficult to climb for some operators. Operators should double-check their adjustments regularly to make sure they are getting the best results. Check the CZPT conditions as well. If the CZPT is still green beans, you should postpone harvesting until it has risen to at least 13% moisture content. For this, refer to the operator’s manual, which should include initial settings for a particular crop.
Wear points
If you’re having trouble with your grain elevator, there are some easy ways to improve its performance. For 1 thing, you can replace the worn and damaged roller chains. This simple change can save you time and money over the long run. Secondly, you can improve your harvest efficiency by avoiding unnecessary downtime. These 2 steps will increase the efficiency of your combine.So, keep reading to learn how to improve your grain elevator’s performance.
In-cab adjustments
In-cab adjustments on a Combine Harvest chain spiket are a great way to tweak the harvest speed and adjust the threshing speeds to maximize yield and minimize damage to crops. While pocket-type setting guides are convenient, it’s also beneficial to consult the manual for more detailed information. For example, the manual will tell you the proper speed for threshing a field, while the manual will explain how to set the threshing speed to minimize grain damage and boost harvest speed.
It’s important to note that yields can vary widely from field to field, so it’s important to monitor the engine load when
adjusting threshing speeds.In-cab adjustments for a Combine Harvest chain spiket should be performed during regular maintenance to minimize damage to crops. To prevent damage to crops, adjust the threshing speed as necessary to ensure that CZPT is not cracked. Broken cobs or too much residue can be signs of excessive threshing. Threshing speed should begin at the top of the operating manual rpm,and then be monitored to ensure the desired amount of damage is not occurring.

Company Information

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Iron
Power Source: Electricity
Weight: 1.44kg
After-sales Service: Installation Guide 3-Year Warranty
Customization:
Available

|

Customized Request

ladder sprocket

How do I Prevent Wear and Damage to Ladder Sprockets during Conveyor Operation?

Preventing wear and damage to ladder sprockets during conveyor operation is essential to ensure their longevity and maintain the overall efficiency of the conveyor system. Here are some preventive measures to follow:

  • Proper Lubrication: Apply the appropriate lubricant to the ladder sprockets and the conveyor chain regularly. Lubrication reduces friction between the sprocket teeth and the chain links, minimizing wear and prolonging the sprocket’s life.
  • Chain Tension: Maintain the correct tension in the conveyor chain. Proper tensioning prevents excessive stress on the ladder sprockets and chain links, reducing wear and preventing premature failure.
  • Chain Alignment: Ensure the conveyor chain is correctly aligned with the ladder sprocket. Misalignment can cause uneven wear on the sprocket teeth and chain links, leading to accelerated wear and potential damage.
  • Cleanliness: Keep the ladder sprockets and the surrounding area clean from debris, dirt, and contaminants. Foreign particles can cause chain jamming, accelerated wear, and affect sprocket performance.
  • Regular Inspection: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Early detection of issues allows for timely maintenance and prevents further damage.
  • Replace Worn Sprockets: Monitor the condition of the ladder sprocket teeth regularly. If the sprocket teeth show significant wear, chipping, or deformation, replace the sprocket promptly to prevent further damage to the conveyor chain.
  • Inspect Chain Wear: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. A worn chain can accelerate sprocket wear, so replace the chain if it is beyond its recommended service life.
  • Load Capacity: Ensure that the ladder sprockets are appropriately sized and rated for the load capacity of the conveyor system. Using sprockets that are too small or not designed for heavy-duty applications can lead to premature wear and failure.
  • Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.

By following these preventive measures, you can minimize wear and damage to ladder sprockets, prolong their service life, and maintain a reliable and efficient conveyor system. Regular maintenance and inspections are essential to identify and address any potential issues early on, preventing costly downtime and ensuring the smooth operation of your conveyor system.

ladder sprocket

How do I Calculate the Required Torque and Power for a Ladder Sprocket Setup?

Calculating the required torque and power for a ladder sprocket setup involves considering several factors related to the conveyor system’s design and operation. Here’s a step-by-step guide to the calculation process:

  1. Identify Parameters: Gather the necessary data, including conveyor system specifications such as conveyor length, speed, chain pitch, sprocket diameter, and the weight of the conveyed material per unit length (if applicable).
  2. Calculate Chain Tension: Determine the chain tension in the conveyor system. Chain tension depends on the conveyor’s angle of inclination, the weight of the material being conveyed, and any additional forces acting on the chain.
  3. Calculate Chain Pull Force: The chain pull force is the force required to move the conveyor chain. It is calculated by multiplying the chain tension by the number of chain strands.
  4. Calculate Torque: To calculate the torque required for the ladder sprocket, multiply the chain pull force by the sprocket radius. The sprocket radius is half of the sprocket diameter.
  5. Consider Efficiency: Take into account the efficiency of the conveyor system. The actual torque required will be higher than the calculated torque due to efficiency losses in bearings, chains, and other components.
  6. Calculate Power: To determine the power required for the ladder sprocket setup, multiply the calculated torque by the conveyor’s rotational speed in radians per second. The rotational speed can be obtained by converting the conveyor speed from meters per second to radians per second.
  7. Apply Safety Factors: Apply safety factors to the calculated torque and power values to ensure that the system can handle occasional peak loads and avoid running the system at its maximum capacity continuously.

Keep in mind that these calculations provide an estimate of the required torque and power for the ladder sprocket setup. Actual operating conditions, variations in material properties, and other external factors may influence the results. Additionally, it’s essential to consult conveyor system experts or sprocket manufacturers for further guidance and to verify the accuracy of the calculations.

By accurately calculating the required torque and power, you can ensure that the ladder sprocket setup is appropriately sized to handle the conveyor system’s load and operational demands, leading to efficient and reliable conveyor performance.

ladder sprocket

How do I Choose the Right Size and Pitch of a Ladder Sprocket for my Conveyor System?

Choosing the right size and pitch of a ladder sprocket for your conveyor system is critical to ensure proper operation, efficient power transmission, and prolonged equipment life. Here are the steps to guide you through the selection process:

  • 1. Identify Conveyor Chain Type: Determine the type of conveyor chain used in your system. Different chain types have specific pitch measurements, and the ladder sprocket must match the chain’s pitch to ensure proper engagement.
  • 2. Determine Sprocket Teeth Count: Calculate the required number of teeth for the ladder sprocket based on the desired conveyor speed, driven shaft RPM, and the chain’s speed factor. The speed factor is typically provided by the chain manufacturer.
  • 3. Consider Chain Wrap Angle: Ensure that the sprocket size allows for sufficient chain wrap around the sprocket to prevent chain disengagement. The chain wrap angle should be within the manufacturer’s recommended range.
  • 4. Assess Conveyor Load: Evaluate the conveyor system’s load and the maximum tension the chain will experience. The ladder sprocket’s material and design must be able to handle the load without deformation or failure.
  • 5. Determine Shaft Diameter: The ladder sprocket’s bore size (inner hole) should match the driven shaft’s diameter or use a taper-lock bushing or through-bore hub to adapt the sprocket to the shaft size.
  • 6. Consider Space Constraints: Ensure that the chosen ladder sprocket size fits within the available space in the conveyor system without interfering with other components.
  • 7. Consult Manufacturer Data: Refer to the ladder sprocket manufacturer’s data and specifications to find the appropriate sprocket size and pitch options for your specific conveyor chain type.
  • 8. Opt for High-Quality Materials: Choose a ladder sprocket made from high-quality materials that offer good wear resistance and durability, especially for applications with harsh environments or heavy loads.
  • 9. Seek Expert Advice: If you are unsure about the selection process, consult with conveyor system experts or sprocket manufacturers for assistance in choosing the right ladder sprocket size and pitch.

By carefully considering the chain type, conveyor load, sprocket teeth count, and other relevant factors, you can select the appropriate size and pitch of a ladder sprocket that ensures optimal performance and reliable power transmission in your conveyor system.

China Standard 80417785 Agricultural Chain Sprocket for Combine Harvest  China Standard 80417785 Agricultural Chain Sprocket for Combine Harvest
editor by Dream 2024-04-25

China Standard Plate Wheels 16b Chain Sprocket 1 X 17.02 mm

Product Description

Product Description

A sprocket is a wheel with cogged chain teeth, which is used to mesh with the accurate pitch blocks on the link or cable. It is widely used in the chemical industry, textile machinery, escalator, wood processing, three-dimensional parking garage, agricultural machinery, food processing, instrumentation, petroleum, and other industries. Sprockets usually include many models, and different models are described in different ways.

As 1 of the leading China sprockets manufacturers and suppliers in China, we ensure the high quality of every sprocket. Trust us and contact now for more information!

Product Parameters

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

Can Ladder Sprockets be Used in High-Load and Heavy-Duty Conveyor Applications?

Yes, ladder sprockets can be used in high-load and heavy-duty conveyor applications, provided they are appropriately designed and manufactured to handle the specific demands of such applications. Here’s why ladder sprockets are suitable for high-load and heavy-duty conveyor use:

  • Continuous Chain Support: Ladder sprockets provide continuous support to the conveyor chain, distributing the load evenly across the chain links. This design feature helps prevent localized stress concentration and ensures reliable power transmission under high loads.
  • Durable Materials: High-load and heavy-duty conveyor applications require sprockets made from durable materials that can withstand the demanding operating conditions. Ladder sprockets are typically constructed from robust materials such as steel, hardened alloys, or other high-strength engineering plastics.
  • Proper Sprocket Selection: The right ladder sprocket size and pitch, along with an adequate number of teeth, are crucial for distributing the load evenly and ensuring smooth motion. Proper sprocket selection is essential for preventing premature wear or failure under high loads.
  • Enhanced Chain Engagement: The ladder sprocket’s continuous support and precise engagement with the chain links contribute to reduced chain wear and prevent chain slippage, which is essential for maintaining reliable power transmission in heavy-duty applications.
  • Application-Specific Design: Ladder sprockets can be customized for specific high-load and heavy-duty conveyor applications. Manufacturers can adapt the sprocket design, material, and tooth profile to meet the unique demands of different industries and conveyor systems.
  • Compatibility with High-Strength Chains: Ladder sprockets are designed to work with various high-strength chains, making them compatible with heavy-duty chains that can withstand substantial loads and stress.
  • Engineering Considerations: Engineers and conveyor system designers must consider factors such as torque, speed, load distribution, and the conveyor’s overall design to ensure that the ladder sprockets can handle the anticipated loads effectively.

While ladder sprockets are suitable for high-load and heavy-duty conveyor applications, it is essential to perform proper engineering calculations and consider the specific requirements of the conveyor system. Conveyor system designers should collaborate with sprocket manufacturers and experts to ensure that the ladder sprockets meet the application’s demands and ensure safe and efficient operation under high loads.

When appropriately selected and designed, ladder sprockets can provide reliable power transmission, extended service life, and minimal downtime, making them a valuable choice for high-load and heavy-duty conveyor applications in various industries.

ladder sprocket

What are the Load-Carrying Capacities of Different Ladder Sprocket Configurations?

The load-carrying capacity of ladder sprockets varies depending on their design, material, and size. It is essential to consider several factors when determining the load-carrying capacity of a ladder sprocket configuration:

  • Material: The material used in the construction of the ladder sprocket significantly influences its load-carrying capacity. Steel sprockets are known for their high strength and load-bearing capabilities, while high-strength engineering plastics are suitable for lighter loads and specific food processing applications.
  • Size and Number of Teeth: Generally, ladder sprockets with more teeth provide a larger contact area with the chain, distributing the load more evenly and increasing the load-carrying capacity. Larger sprockets, with bigger diameters, can also handle higher loads due to their increased surface area.
  • Hub Configuration: The hub configuration of the ladder sprocket can affect its load-carrying capacity. Sprockets with robust and sturdy hubs can handle higher loads compared to sprockets with standard or lightweight hubs.
  • Customization: Some ladder sprockets can be customized to enhance their load-carrying capacity for specific applications. Custom design modifications, additional support structures, or higher-strength materials can be employed to meet heavy-duty requirements.
  • Application and Environment: The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
  • Industry Standards: Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.

It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.

Regular maintenance and inspection of the ladder sprockets are essential to identify signs of wear or damage that can affect the load-carrying capacity. By selecting the right ladder sprocket configuration and ensuring proper maintenance, you can optimize the load-carrying capacity and reliability of your conveyor system.

ladder sprocket

What are the Common Applications of Ladder Sprockets in Various Industries?

Ladder sprockets find a variety of applications in different industries where precise motion control, low noise, and high-speed operation are essential. Some common applications of ladder sprockets include:

  • Conveyor Systems: Ladder sprockets are widely used in conveyor systems, especially in high-speed conveyors. They ensure smooth and stable motion of the conveyor chain, minimizing chain slippage and maintaining accurate material handling.
  • Material Handling: In material handling equipment, such as bucket elevators, ladder sprockets provide reliable power transmission and guidance for the lifting and conveying of bulk materials.
  • Automated Assembly Lines: Ladder sprockets are employed in automated assembly lines to precisely control the movement of components or products during the manufacturing process.
  • Robotic Systems: In robotics and automated guided vehicles (AGVs), ladder sprockets are used to control the movement of robotic arms or wheels with high precision.
  • Food and Beverage Industry: Ladder sprockets are utilized in the food and beverage industry, particularly in conveyor systems for packaging, sorting, and transporting food products.
  • Printing and Packaging: In printing machines and packaging equipment, ladder sprockets facilitate accurate movement and synchronization of materials and products.
  • Textile Industry: Ladder sprockets play a role in textile machinery for the controlled movement of fabrics and threads during weaving, knitting, and other processes.
  • Agriculture: Ladder sprockets are used in agricultural equipment, such as harvesters and grain elevators, for handling and transporting crops.
  • Mining and Construction: In heavy machinery used in mining and construction, ladder sprockets contribute to reliable power transmission and precise motion control in conveyor and material handling systems.

The versatility and advantages of ladder sprockets make them suitable for a wide range of industrial applications. Their ability to guide and support the chain while minimizing noise and vibration makes them particularly valuable in industries where operational efficiency and safety are paramount.

When considering the use of ladder sprockets in specific industries, it is essential to understand the application requirements and consult with experts to ensure the correct selection and integration for optimal performance.

China Standard Plate Wheels 16b Chain Sprocket 1 X 17.02 mm  China Standard Plate Wheels 16b Chain Sprocket 1 X 17.02 mm
editor by CX 2024-04-15

China Hot selling #80 C-Hub Roller Chain Sprocket ANSI Certified Standard

Product Description

Product Description

80 Chain Sprockets are manufactured in accordance with ANSI B29.1 Standards and are made for 1″ pitch 80 and heavy-duty 80H roller chains. Being manufactured to The American National Standards Institutes dimensions means that these sprockets directly interchange with other manufacturers. Up to 30-teeth, our 80 sprockets feature hardened teeth for a dynamic performance factor increase and increased sprocket longevity. Out standard steel sprockets utilize a black-oxide coating for added corrosion protection, they are also manufactured from a premium high-strength grade of mild steel for an additional increase in sprocket life.
 

Product Parameters

 

Sprocket Size Type Tooth Count Outside Diameter Stock Bore Recommend Max. Bore Hub Diameter Length Thru Bore Weight (LBS)
80C11 11 C 4.571 1” 1-5/8″ 2-29/32” 2-3/8″ 3.87
80C12 12 C 4.330 1” 1-7/8″ 3-1/8” 2-3/8″ 4.31
80C13 13 C 4.660 1” 2″ 3-1/64” 2-3/8″ 5.32
80C14 14 C 4.980 1” 2-1/4″ 3-11/32” 2-3/8″ 6.44
80C15 15 C 5.300 1” 2-1/2″ 3-13/16” 2-3/8″ 7.75
80C16 16 C 5.630 1” 2-3/4″ 4” 2-3/8″ 8.81
80C70 70 C 22.870 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 75.7
80C72 72 C 23.500 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 81.4
80C76 76 C 24.780 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 87.8
80C80 80 C 26.050 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 89.9
80C84 84 C 27.330 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 99.2
80C90 90 C 29.240 1-1/2″ 4-1/4″ 6-1/4″ 31/2″ 106.0
80C96 96 C 31.150 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 117.0
80C112 112 C 36.240 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 154.0

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

Can Ladder Sprockets be Customized or Modified for Specific Conveyor Configurations?

Yes, ladder sprockets can be customized or modified to fit specific conveyor configurations and meet the unique requirements of different industrial applications. Here are some ways ladder sprockets can be tailored for specific conveyor setups:

  • Size and Pitch: Ladder sprockets can be manufactured in various sizes and pitches to match the specific conveyor chain used in the system. Customizing the size ensures proper engagement and reliable power transmission.
  • Number of Teeth: The number of teeth on the ladder sprocket can be adjusted based on the application’s speed and torque requirements. More teeth can distribute the load across a larger area, while fewer teeth can provide higher speed capabilities.
  • Material Selection: Depending on the conveyor system’s operating environment and load capacity, ladder sprockets can be made from different materials, such as steel, stainless steel, hardened alloys, or high-strength engineering plastics.
  • Tooth Profile: The tooth profile of ladder sprockets can be customized for specific chain types or to optimize engagement and reduce wear on the chain links.
  • Hub Configuration: Ladder sprockets can be designed with different hub configurations to accommodate different shaft sizes, including through-bore hubs or taper-lock bushings.
  • Special Coatings: Sprockets can be coated with special materials like corrosion-resistant coatings or anti-friction coatings to enhance their durability and performance in challenging environments.
  • Attachment Options: In certain applications, ladder sprockets can be modified with custom attachments to suit unique conveyor configurations or facilitate the handling of specific products.
  • Design Modifications: Sprocket manufacturers can make design modifications based on specific application requirements, such as adding additional support structures or features to enhance chain engagement and stability.

Collaborating with experienced sprocket manufacturers or conveyor system experts is crucial when customizing ladder sprockets. Their expertise can help ensure that the modifications are well-suited for the application, comply with industry standards, and maintain the sprocket’s performance and longevity.

Customized ladder sprockets offer the advantage of tailoring the conveyor system to specific needs, maximizing efficiency, and extending the sprocket’s service life under the unique demands of the industrial operation.

ladder sprocket

What are the Load-Carrying Capacities of Different Ladder Sprocket Configurations?

The load-carrying capacity of ladder sprockets varies depending on their design, material, and size. It is essential to consider several factors when determining the load-carrying capacity of a ladder sprocket configuration:

  • Material: The material used in the construction of the ladder sprocket significantly influences its load-carrying capacity. Steel sprockets are known for their high strength and load-bearing capabilities, while high-strength engineering plastics are suitable for lighter loads and specific food processing applications.
  • Size and Number of Teeth: Generally, ladder sprockets with more teeth provide a larger contact area with the chain, distributing the load more evenly and increasing the load-carrying capacity. Larger sprockets, with bigger diameters, can also handle higher loads due to their increased surface area.
  • Hub Configuration: The hub configuration of the ladder sprocket can affect its load-carrying capacity. Sprockets with robust and sturdy hubs can handle higher loads compared to sprockets with standard or lightweight hubs.
  • Customization: Some ladder sprockets can be customized to enhance their load-carrying capacity for specific applications. Custom design modifications, additional support structures, or higher-strength materials can be employed to meet heavy-duty requirements.
  • Application and Environment: The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
  • Industry Standards: Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.

It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.

Regular maintenance and inspection of the ladder sprockets are essential to identify signs of wear or damage that can affect the load-carrying capacity. By selecting the right ladder sprocket configuration and ensuring proper maintenance, you can optimize the load-carrying capacity and reliability of your conveyor system.

ladder sprocket

What are the Common Applications of Ladder Sprockets in Various Industries?

Ladder sprockets find a variety of applications in different industries where precise motion control, low noise, and high-speed operation are essential. Some common applications of ladder sprockets include:

  • Conveyor Systems: Ladder sprockets are widely used in conveyor systems, especially in high-speed conveyors. They ensure smooth and stable motion of the conveyor chain, minimizing chain slippage and maintaining accurate material handling.
  • Material Handling: In material handling equipment, such as bucket elevators, ladder sprockets provide reliable power transmission and guidance for the lifting and conveying of bulk materials.
  • Automated Assembly Lines: Ladder sprockets are employed in automated assembly lines to precisely control the movement of components or products during the manufacturing process.
  • Robotic Systems: In robotics and automated guided vehicles (AGVs), ladder sprockets are used to control the movement of robotic arms or wheels with high precision.
  • Food and Beverage Industry: Ladder sprockets are utilized in the food and beverage industry, particularly in conveyor systems for packaging, sorting, and transporting food products.
  • Printing and Packaging: In printing machines and packaging equipment, ladder sprockets facilitate accurate movement and synchronization of materials and products.
  • Textile Industry: Ladder sprockets play a role in textile machinery for the controlled movement of fabrics and threads during weaving, knitting, and other processes.
  • Agriculture: Ladder sprockets are used in agricultural equipment, such as harvesters and grain elevators, for handling and transporting crops.
  • Mining and Construction: In heavy machinery used in mining and construction, ladder sprockets contribute to reliable power transmission and precise motion control in conveyor and material handling systems.

The versatility and advantages of ladder sprockets make them suitable for a wide range of industrial applications. Their ability to guide and support the chain while minimizing noise and vibration makes them particularly valuable in industries where operational efficiency and safety are paramount.

When considering the use of ladder sprockets in specific industries, it is essential to understand the application requirements and consult with experts to ensure the correct selection and integration for optimal performance.

China Hot selling #80 C-Hub Roller Chain Sprocket ANSI Certified Standard  China Hot selling #80 C-Hub Roller Chain Sprocket ANSI Certified Standard
editor by CX 2024-04-10

China Standard Bending Edge Belt and Sprocket with Chain for Grass Mop/Drag Mats Flat Wire Conveyor Belt

Product Description

Product Description

Specification :

Material

carbon steel, SUS

Wire diameter

  1.5mm,1.8mm,2mm,2.5mm,etc.

Rod diameter

4 to 12 mm

Spiral wire pitch

  65mm,67mm,70mm,etc.

Chain pitch

19.05mm 25.4mm 31.75mm 38.1mm 50.8mm 76.2mm or customized

Width

0.2m to 4m

opening number

3/5/7 opening 

 

Application :

* Durable,long service life
* Withstand high temperatures
* Good air permeability
* Good stability
* Simple structure and easy cleaning

 

 

stainless steel 304 conveyor mesh belt

shaft 

gears

stainless steel chain 

related parts can be supply

we can do it as your request

accept customization

good quality and best competitive price

Support according to the drawing customized.Inox stainless steel 304 metal flat flex conveyor wire mesh belt conveyor systems price for pizza oven chocolate enrober bakeryConveyor belt with Z type is also called chocolate conveyor belt or ladder belt.

 

Drawings

   

                     

 

Detailed Photos

Food Grade 304 Stainless Steel Chain Link Spiral Wire Mesh Conveyor Belt.304 Stainless Steel Chain Link Mesh Conveyor Belt / Stainless Steel Spiral Wire Mesh Conveyor Belt / Food Grade Stainless Steel Wire Mesh Conveyor Belt.Description :304 Stainless Steel Chain Link Mesh Conveyor Belt is driven with a cross rod which connects the chain strands by either passing through or under the wire mesh fabric. The density of wire mesh fabric is choosen according to size of the product conveyed on the belt.
 

 

Applications

♦ Typical Applications ♦ Annealing furnaces ♦ Cleaning machines ♦ Conveyor machines ♦ Drying ovens ♦ Frosters ♦ Frying facilities ♦ Ovens ♦ Refrigeration facilities

Packaging & Shipping

 

Company Profile

The company pursues the purpose of customer first, quality first; Adhere to the people-oriented, truth-seeking and pragmatic principle. Actively promote advanced production and management mode. The company mainly produces all kinds of wire, screen, high number of screen products. The product quality is excellent, the specification is complete, the product mainly has: stainless steel wire mesh , copper wire mesh, welded wire mesh , hexagonal net, chain link fence, crimped wire mesh, etc. Our company can also according to your needs for you to process the products you need, so that you are satisfied. Silk is the heart of the 4 seas . 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Type: Customized
Material: Customized
Inside Material: Customized
Samples:
US$ 15/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

ladder sprocket

How do I Prevent Wear and Damage to Ladder Sprockets during Conveyor Operation?

Preventing wear and damage to ladder sprockets during conveyor operation is essential to ensure their longevity and maintain the overall efficiency of the conveyor system. Here are some preventive measures to follow:

  • Proper Lubrication: Apply the appropriate lubricant to the ladder sprockets and the conveyor chain regularly. Lubrication reduces friction between the sprocket teeth and the chain links, minimizing wear and prolonging the sprocket’s life.
  • Chain Tension: Maintain the correct tension in the conveyor chain. Proper tensioning prevents excessive stress on the ladder sprockets and chain links, reducing wear and preventing premature failure.
  • Chain Alignment: Ensure the conveyor chain is correctly aligned with the ladder sprocket. Misalignment can cause uneven wear on the sprocket teeth and chain links, leading to accelerated wear and potential damage.
  • Cleanliness: Keep the ladder sprockets and the surrounding area clean from debris, dirt, and contaminants. Foreign particles can cause chain jamming, accelerated wear, and affect sprocket performance.
  • Regular Inspection: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Early detection of issues allows for timely maintenance and prevents further damage.
  • Replace Worn Sprockets: Monitor the condition of the ladder sprocket teeth regularly. If the sprocket teeth show significant wear, chipping, or deformation, replace the sprocket promptly to prevent further damage to the conveyor chain.
  • Inspect Chain Wear: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. A worn chain can accelerate sprocket wear, so replace the chain if it is beyond its recommended service life.
  • Load Capacity: Ensure that the ladder sprockets are appropriately sized and rated for the load capacity of the conveyor system. Using sprockets that are too small or not designed for heavy-duty applications can lead to premature wear and failure.
  • Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.

By following these preventive measures, you can minimize wear and damage to ladder sprockets, prolong their service life, and maintain a reliable and efficient conveyor system. Regular maintenance and inspections are essential to identify and address any potential issues early on, preventing costly downtime and ensuring the smooth operation of your conveyor system.

ladder sprocket

Can Ladder Sprockets be Used in Food Processing and Packaging Conveyors?

Yes, ladder sprockets can be used in food processing and packaging conveyors, but specific considerations must be taken to ensure compliance with food safety regulations and the unique requirements of the industry:

  • Material Selection: Choose ladder sprockets made from food-grade materials that meet FDA and other food safety standards. Stainless steel or certain high-strength engineering plastics are commonly used for food processing applications due to their corrosion resistance and ease of cleaning.
  • Sanitary Design: Ensure that the ladder sprocket design allows for easy cleaning and sanitization. Smooth surfaces without crevices or tight spaces can prevent bacterial growth and facilitate thorough cleaning.
  • Resistance to Contamination: Select ladder sprockets that can withstand the harsh cleaning agents and sanitizing chemicals used in the food industry without degradation or contamination of the food product.
  • Hygienic Lubricants: Use food-grade lubricants approved for use in food processing environments to lubricate the ladder sprockets and conveyor chain. Avoid lubricants that may come into contact with the food product.
  • Proper Sealing: Ensure that the sprocket bearings are effectively sealed to prevent the ingress of contaminants and maintain a clean conveyor environment.
  • Hazard Analysis and Critical Control Points (HACCP): Implement HACCP principles to identify potential hazards in the food processing and packaging process and implement control measures to prevent contamination. Properly selected and maintained ladder sprockets play a part in the overall hazard control strategy.
  • Regular Inspection and Maintenance: Establish a robust maintenance program to regularly inspect and clean ladder sprockets to prevent contamination risks and ensure reliable conveyor performance.
  • Compliance with Regulations: Ensure that the ladder sprockets and the overall conveyor system comply with relevant food safety regulations and industry standards, such as those set by the FDA, USDA, and other food safety agencies.

Due to the stringent requirements of the food processing and packaging industry, ladder sprockets used in these applications often have specialized designs and materials to ensure food safety and hygiene. It’s essential to work with conveyor system experts and sprocket manufacturers who understand the specific needs of the food industry and can provide suitable solutions.

By using ladder sprockets designed and constructed with food safety in mind, food processing and packaging conveyors can efficiently and safely handle food products while complying with the industry’s stringent regulations and quality standards.

ladder sprocket

Can you Explain the Working Principle of a Ladder Sprocket in a Conveyor System?

In a conveyor system, a ladder sprocket operates based on the principle of guiding and supporting the conveyor chain to ensure smooth and reliable motion. Here’s a detailed explanation of the working principle:

  • Design and Structure: A ladder sprocket consists of two parallel plates or bars connected by cross members. The cross members have gaps between them, allowing the chain links to rest securely within the gaps.
  • Chain Engagement: The conveyor chain moves along the conveyor path and wraps around the ladder sprocket. As the chain travels, the chain links fit into the gaps between the cross members, resulting in continuous support and engagement of the chain with the sprocket.
  • Guiding the Chain: The ladder sprocket guides the conveyor chain, preventing it from derailing or skipping during operation. The chain links are confined within the cross members, which helps maintain the chain’s correct alignment with the sprocket teeth.
  • Preventing Chain Slippage: The ladder sprocket’s design ensures that each chain link is securely held within the cross members. This prevents chain slippage and ensures accurate and consistent power transmission between the sprocket and the conveyor chain.
  • Smooth Motion: The ladder sprocket’s continuous support of the chain links provides smooth motion without significant chain whip or slack. This is crucial for conveyor systems that require precise and consistent movement of materials.
  • Low Noise and Vibration: Due to the chain’s secure engagement and reduced slippage, a ladder sprocket contributes to low noise and vibration levels in the conveyor system, making it suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems, ensuring stable and accurate motion of the chain even at elevated speeds.

Overall, the working principle of a ladder sprocket in a conveyor system revolves around guiding, supporting, and engaging the conveyor chain to facilitate smooth and reliable material handling. The ladder sprocket’s unique design provides advantages in certain applications where precise motion control, low noise, and high-speed operation are essential.

When incorporating ladder sprockets into conveyor systems, it is crucial to ensure the proper selection and alignment of the sprocket with the chain to achieve optimal performance and longevity of both the sprocket and the conveyor system.

China Standard Bending Edge Belt and Sprocket with Chain for Grass Mop/Drag Mats Flat Wire Conveyor Belt  China Standard Bending Edge Belt and Sprocket with Chain for Grass Mop/Drag Mats Flat Wire Conveyor Belt
editor by CX 2023-10-03

China Standard Agricultural 1317192c1 Sprocket Replacement of Case-Ih Combine Grain Handling Parts

Product Description

 

Product Description

 

1317192C1 Sprocket Fits the following models

1317192C1 sprocket Replacement Chain Drive Fits Case IH Combine:
(Upper & Lower Clean Grain Auger) Case-IH COMBINE : 2166 2344 2366
(Lower Clean Grain Auger) Case-IH COMBINE: 1682
(Upper Clean Grain Auger) Case-IH COMBINE: 2188 2388
Forage Harvester Case-IH: 2144

Description / Notes: 9 Teeth; 1-1/4″ Diameter Shaft; Hardened
Cross Reference Part #: 1317192C1; A-1317192C1; SP122; SP122H
Replaces OEM Part Number:1317192C1

Replace the worn Sprockets and Idlers on your combine to extend the life of your chains and improve overall performance

Parameters of 1317192C1 Sprocket

Weight, W kg 1.5
Inner diameter, d mm 35
Outer diameter, D mm 132
Number of teeth, Z   9
Pitch, p mm 41.4
Height, H mm 57
Outside diameter, D1 mm 50
Key slot mm 4x8x57

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

 
 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?

When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:

  • Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
  • Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
  • Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
  • Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
  • Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
  • Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
  • Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.

It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.

Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.

ladder sprocket

Can Ladder Sprockets be Used in Food Processing and Packaging Conveyors?

Yes, ladder sprockets can be used in food processing and packaging conveyors, but specific considerations must be taken to ensure compliance with food safety regulations and the unique requirements of the industry:

  • Material Selection: Choose ladder sprockets made from food-grade materials that meet FDA and other food safety standards. Stainless steel or certain high-strength engineering plastics are commonly used for food processing applications due to their corrosion resistance and ease of cleaning.
  • Sanitary Design: Ensure that the ladder sprocket design allows for easy cleaning and sanitization. Smooth surfaces without crevices or tight spaces can prevent bacterial growth and facilitate thorough cleaning.
  • Resistance to Contamination: Select ladder sprockets that can withstand the harsh cleaning agents and sanitizing chemicals used in the food industry without degradation or contamination of the food product.
  • Hygienic Lubricants: Use food-grade lubricants approved for use in food processing environments to lubricate the ladder sprockets and conveyor chain. Avoid lubricants that may come into contact with the food product.
  • Proper Sealing: Ensure that the sprocket bearings are effectively sealed to prevent the ingress of contaminants and maintain a clean conveyor environment.
  • Hazard Analysis and Critical Control Points (HACCP): Implement HACCP principles to identify potential hazards in the food processing and packaging process and implement control measures to prevent contamination. Properly selected and maintained ladder sprockets play a part in the overall hazard control strategy.
  • Regular Inspection and Maintenance: Establish a robust maintenance program to regularly inspect and clean ladder sprockets to prevent contamination risks and ensure reliable conveyor performance.
  • Compliance with Regulations: Ensure that the ladder sprockets and the overall conveyor system comply with relevant food safety regulations and industry standards, such as those set by the FDA, USDA, and other food safety agencies.

Due to the stringent requirements of the food processing and packaging industry, ladder sprockets used in these applications often have specialized designs and materials to ensure food safety and hygiene. It’s essential to work with conveyor system experts and sprocket manufacturers who understand the specific needs of the food industry and can provide suitable solutions.

By using ladder sprockets designed and constructed with food safety in mind, food processing and packaging conveyors can efficiently and safely handle food products while complying with the industry’s stringent regulations and quality standards.

ladder sprocket

What are the Advantages of Using Ladder Sprockets over Other Sprocket Designs?

Ladder sprockets offer several advantages over other sprocket designs, making them a preferred choice in certain applications where specific benefits are required. Here are the advantages of using ladder sprockets:

  • Continuous Chain Support: Ladder sprockets provide continuous support to the conveyor chain or belt. The chain links rest securely within the gaps of the ladder sprocket, ensuring reliable engagement and reducing the risk of chain derailment or slippage.
  • Smooth and Quiet Operation: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration during operation. This makes ladder sprockets suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems due to their ability to maintain chain stability and accurate motion even at elevated speeds.
  • Precise Motion Control: The ladder sprocket’s design provides continuous support and guidance to the chain, ensuring accurate positioning and minimizing chain whip or slack. This is crucial for applications that require precise motion control.
  • Low Maintenance: Due to the reduced chain wear and improved engagement, ladder sprockets may require less frequent maintenance compared to other sprocket designs, leading to lower overall maintenance costs.
  • Compatibility: Ladder sprockets are compatible with various chain types, providing flexibility in conveyor system design and offering options for different industrial applications.
  • Reduced Chain Wear: The continuous support and guidance provided by ladder sprockets result in reduced chain wear, extending the service life of the conveyor chain and sprocket.
  • Prevents Chain Jumping: The ladder sprocket’s design prevents chain jumping or skipping, ensuring continuous and reliable power transmission between the sprocket and the conveyor chain.
  • Enhanced Safety: With reduced chain slippage and improved engagement, ladder sprockets contribute to a safer conveyor system operation, minimizing the risk of unexpected failures.

It’s important to note that ladder sprockets may not be suitable for all applications, and the choice of sprocket design depends on specific requirements and operating conditions. Traditional toothed sprockets or other specialized sprocket designs may be more appropriate in certain scenarios.

When considering the use of ladder sprockets, it is essential to assess the application needs, conveyor system requirements, and consult with experts to make an informed decision for optimal performance and efficiency.

China Standard Agricultural 1317192c1 Sprocket Replacement of Case-Ih Combine Grain Handling Parts  China Standard Agricultural 1317192c1 Sprocket Replacement of Case-Ih Combine Grain Handling Parts
editor by CX 2023-09-30

China Best Sales #80 C-Hub Roller Chain Sprocket ANSI Certified Standard

Product Description

Product Description

80 Chain Sprockets are manufactured in accordance with ANSI B29.1 Standards and are made for 1″ pitch 80 and heavy-duty 80H roller chains. Being manufactured to The American National Standards Institutes dimensions means that these sprockets directly interchange with other manufacturers. Up to 30-teeth, our 80 sprockets feature hardened teeth for a dynamic performance factor increase and increased sprocket longevity. Out standard steel sprockets utilize a black-oxide coating for added corrosion protection, they are also manufactured from a premium high-strength grade of mild steel for an additional increase in sprocket life.
 

Product Parameters

 

Sprocket Size Type Tooth Count Outside Diameter Stock Bore Recommend Max. Bore Hub Diameter Length Thru Bore Weight (LBS)
80C11 11 C 4.571 1” 1-5/8″ 2-29/32” 2-3/8″ 3.87
80C12 12 C 4.330 1” 1-7/8″ 3-1/8” 2-3/8″ 4.31
80C13 13 C 4.660 1” 2″ 3-1/64” 2-3/8″ 5.32
80C14 14 C 4.980 1” 2-1/4″ 3-11/32” 2-3/8″ 6.44
80C15 15 C 5.300 1” 2-1/2″ 3-13/16” 2-3/8″ 7.75
80C16 16 C 5.630 1” 2-3/4″ 4” 2-3/8″ 8.81
80C70 70 C 22.870 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 75.7
80C72 72 C 23.500 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 81.4
80C76 76 C 24.780 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 87.8
80C80 80 C 26.050 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 89.9
80C84 84 C 27.330 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 99.2
80C90 90 C 29.240 1-1/2″ 4-1/4″ 6-1/4″ 31/2″ 106.0
80C96 96 C 31.150 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 117.0
80C112 112 C 36.240 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 154.0

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?

When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:

  • Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
  • Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
  • Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
  • Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
  • Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
  • Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
  • Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.

It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.

Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.

ladder sprocket

Can Ladder Sprockets be Used in Material Handling and Logistics Applications?

Yes, ladder sprockets can be used in material handling and logistics applications, and they play a crucial role in various conveyor systems used for material transportation and distribution. Ladder sprockets are well-suited for these applications due to their design and load-carrying capacity. Here’s how ladder sprockets are utilized in material handling and logistics:

  • Conveyor Systems: Ladder sprockets are commonly used in conveyor systems to drive and guide the conveyor chain or belt. These systems efficiently move materials along assembly lines, warehouses, distribution centers, and other logistics facilities.
  • Heavy Loads: Material handling and logistics applications often involve the transportation of heavy loads. Ladder sprockets, especially those made from durable materials like steel, can handle the high loads and provide reliable power transmission.
  • Precision and Efficiency: Ladder sprockets, when correctly sized and aligned, offer precise motion control and efficient power transmission. They ensure that materials are transported smoothly and accurately along the conveyor path.
  • Customization: In material handling systems with specific requirements, ladder sprockets can be customized to fit unique conveyor configurations, load-carrying needs, and environmental conditions.
  • Various Industries: Material handling and logistics applications are found in diverse industries, including manufacturing, automotive, e-commerce, food and beverage, pharmaceuticals, and more. Ladder sprockets are adaptable and commonly employed in these sectors.
  • Speed and Throughput: Ladder sprockets, combined with appropriate conveyor designs, can accommodate different speeds and throughput rates, allowing efficient handling of materials in high-volume environments.

It is essential to select ladder sprockets that meet the specific requirements of material handling and logistics applications. Factors such as load capacity, conveyor speed, operating environment, and material compatibility must be considered when choosing ladder sprockets for these systems.

Regular maintenance and inspection are vital to ensure the smooth operation of ladder sprockets in material handling and logistics applications. Proper lubrication, alignment, and timely replacement of worn or damaged sprockets are necessary to maintain the conveyor system’s efficiency and prevent unexpected downtime.

Overall, ladder sprockets are valuable components in material handling and logistics, contributing to the seamless flow of materials, optimizing productivity, and supporting the efficiency of various industries.

ladder sprocket

What is a Ladder Sprocket, and How is it Different from Other Types of Sprockets?

A ladder sprocket is a specific type of sprocket used in chain drive systems. It is also known as a carrier sprocket or cage sprocket. The ladder sprocket is different from other types of sprockets due to its unique design and function:

  • Design: A ladder sprocket consists of two parallel plates or bars connected by cross members, resembling a ladder. The cross members hold the chain links in place, guiding them along the sprocket’s path.
  • Function: The primary function of a ladder sprocket is to guide the chain and prevent it from derailing or skipping during operation. The chain links rest on the cross members, ensuring proper engagement with the sprocket teeth.
  • Chain Support: Unlike traditional sprockets, where the chain wraps around the sprocket teeth, a ladder sprocket provides continuous support to the chain by holding each link securely within the cross members.
  • Low Noise and Vibration: The design of the ladder sprocket results in reduced noise and vibration during operation, making it suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed applications, such as conveyor systems, where maintaining chain stability and precise motion is critical.
  • Accurate Positioning: Due to the continuous support of the chain, ladder sprockets provide accurate positioning and minimize chain whip or slack, ensuring consistent power transmission.

It’s important to note that ladder sprockets are specific to certain chain types, and their design must match the corresponding chain pitch and configuration for proper operation.

While ladder sprockets offer advantages in certain applications, they may not be suitable for all chain drive systems. Other types of sprockets, such as standard toothed sprockets or segmented sprockets, are more common and versatile for a wide range of power transmission applications.

When considering the use of ladder sprockets, it is crucial to understand the specific requirements of the chain drive system and consult with manufacturers or engineers to ensure the correct selection and compatibility for optimal performance.

China Best Sales #80 C-Hub Roller Chain Sprocket ANSI Certified Standard  China Best Sales #80 C-Hub Roller Chain Sprocket ANSI Certified Standard
editor by CX 2023-09-29

China Standard Bending Edge Belt and Sprocket with Chain for Grass Mop/Drag Mats Flat Wire Conveyor Belt

Product Description

Product Description

Specification :

Material

carbon steel, SUS

Wire diameter

  1.5mm,1.8mm,2mm,2.5mm,etc.

Rod diameter

4 to 12 mm

Spiral wire pitch

  65mm,67mm,70mm,etc.

Chain pitch

19.05mm 25.4mm 31.75mm 38.1mm 50.8mm 76.2mm or customized

Width

0.2m to 4m

opening number

3/5/7 opening 

 

Application :

* Durable,long service life
* Withstand high temperatures
* Good air permeability
* Good stability
* Simple structure and easy cleaning

 

 

stainless steel 304 conveyor mesh belt

shaft 

gears

stainless steel chain 

related parts can be supply

we can do it as your request

accept customization

good quality and best competitive price

Support according to the drawing customized.Inox stainless steel 304 metal flat flex conveyor wire mesh belt conveyor systems price for pizza oven chocolate enrober bakeryConveyor belt with Z type is also called chocolate conveyor belt or ladder belt.

 

Drawings

   

                     

 

Detailed Photos

Food Grade 304 Stainless Steel Chain Link Spiral Wire Mesh Conveyor Belt.304 Stainless Steel Chain Link Mesh Conveyor Belt / Stainless Steel Spiral Wire Mesh Conveyor Belt / Food Grade Stainless Steel Wire Mesh Conveyor Belt.Description :304 Stainless Steel Chain Link Mesh Conveyor Belt is driven with a cross rod which connects the chain strands by either passing through or under the wire mesh fabric. The density of wire mesh fabric is choosen according to size of the product conveyed on the belt.
 

 

Applications

♦ Typical Applications ♦ Annealing furnaces ♦ Cleaning machines ♦ Conveyor machines ♦ Drying ovens ♦ Frosters ♦ Frying facilities ♦ Ovens ♦ Refrigeration facilities

Packaging & Shipping

 

Company Profile

The company pursues the purpose of customer first, quality first; Adhere to the people-oriented, truth-seeking and pragmatic principle. Actively promote advanced production and management mode. The company mainly produces all kinds of wire, screen, high number of screen products. The product quality is excellent, the specification is complete, the product mainly has: stainless steel wire mesh , copper wire mesh, welded wire mesh , hexagonal net, chain link fence, crimped wire mesh, etc. Our company can also according to your needs for you to process the products you need, so that you are satisfied. Silk is the heart of the 4 seas . 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Type: Customized
Material: Customized
Inside Material: Customized
Samples:
US$ 15/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

ladder sprocket

What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?

When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:

  • Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
  • Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
  • Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
  • Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
  • Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
  • Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
  • Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.

It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.

Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.

ladder sprocket

Can Ladder Sprockets be Used in Material Handling and Logistics Applications?

Yes, ladder sprockets can be used in material handling and logistics applications, and they play a crucial role in various conveyor systems used for material transportation and distribution. Ladder sprockets are well-suited for these applications due to their design and load-carrying capacity. Here’s how ladder sprockets are utilized in material handling and logistics:

  • Conveyor Systems: Ladder sprockets are commonly used in conveyor systems to drive and guide the conveyor chain or belt. These systems efficiently move materials along assembly lines, warehouses, distribution centers, and other logistics facilities.
  • Heavy Loads: Material handling and logistics applications often involve the transportation of heavy loads. Ladder sprockets, especially those made from durable materials like steel, can handle the high loads and provide reliable power transmission.
  • Precision and Efficiency: Ladder sprockets, when correctly sized and aligned, offer precise motion control and efficient power transmission. They ensure that materials are transported smoothly and accurately along the conveyor path.
  • Customization: In material handling systems with specific requirements, ladder sprockets can be customized to fit unique conveyor configurations, load-carrying needs, and environmental conditions.
  • Various Industries: Material handling and logistics applications are found in diverse industries, including manufacturing, automotive, e-commerce, food and beverage, pharmaceuticals, and more. Ladder sprockets are adaptable and commonly employed in these sectors.
  • Speed and Throughput: Ladder sprockets, combined with appropriate conveyor designs, can accommodate different speeds and throughput rates, allowing efficient handling of materials in high-volume environments.

It is essential to select ladder sprockets that meet the specific requirements of material handling and logistics applications. Factors such as load capacity, conveyor speed, operating environment, and material compatibility must be considered when choosing ladder sprockets for these systems.

Regular maintenance and inspection are vital to ensure the smooth operation of ladder sprockets in material handling and logistics applications. Proper lubrication, alignment, and timely replacement of worn or damaged sprockets are necessary to maintain the conveyor system’s efficiency and prevent unexpected downtime.

Overall, ladder sprockets are valuable components in material handling and logistics, contributing to the seamless flow of materials, optimizing productivity, and supporting the efficiency of various industries.

ladder sprocket

Can you Explain the Working Principle of a Ladder Sprocket in a Conveyor System?

In a conveyor system, a ladder sprocket operates based on the principle of guiding and supporting the conveyor chain to ensure smooth and reliable motion. Here’s a detailed explanation of the working principle:

  • Design and Structure: A ladder sprocket consists of two parallel plates or bars connected by cross members. The cross members have gaps between them, allowing the chain links to rest securely within the gaps.
  • Chain Engagement: The conveyor chain moves along the conveyor path and wraps around the ladder sprocket. As the chain travels, the chain links fit into the gaps between the cross members, resulting in continuous support and engagement of the chain with the sprocket.
  • Guiding the Chain: The ladder sprocket guides the conveyor chain, preventing it from derailing or skipping during operation. The chain links are confined within the cross members, which helps maintain the chain’s correct alignment with the sprocket teeth.
  • Preventing Chain Slippage: The ladder sprocket’s design ensures that each chain link is securely held within the cross members. This prevents chain slippage and ensures accurate and consistent power transmission between the sprocket and the conveyor chain.
  • Smooth Motion: The ladder sprocket’s continuous support of the chain links provides smooth motion without significant chain whip or slack. This is crucial for conveyor systems that require precise and consistent movement of materials.
  • Low Noise and Vibration: Due to the chain’s secure engagement and reduced slippage, a ladder sprocket contributes to low noise and vibration levels in the conveyor system, making it suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems, ensuring stable and accurate motion of the chain even at elevated speeds.

Overall, the working principle of a ladder sprocket in a conveyor system revolves around guiding, supporting, and engaging the conveyor chain to facilitate smooth and reliable material handling. The ladder sprocket’s unique design provides advantages in certain applications where precise motion control, low noise, and high-speed operation are essential.

When incorporating ladder sprockets into conveyor systems, it is crucial to ensure the proper selection and alignment of the sprocket with the chain to achieve optimal performance and longevity of both the sprocket and the conveyor system.

China Standard Bending Edge Belt and Sprocket with Chain for Grass Mop/Drag Mats Flat Wire Conveyor Belt  China Standard Bending Edge Belt and Sprocket with Chain for Grass Mop/Drag Mats Flat Wire Conveyor Belt
editor by CX 2023-09-01

China Custom #80 C-Hub Roller Chain Sprocket ANSI Certified Standard

Product Description

Product Description

80 Chain Sprockets are manufactured in accordance with ANSI B29.1 Standards and are made for 1″ pitch 80 and heavy-duty 80H roller chains. Being manufactured to The American National Standards Institutes dimensions means that these sprockets directly interchange with other manufacturers. Up to 30-teeth, our 80 sprockets feature hardened teeth for a dynamic performance factor increase and increased sprocket longevity. Out standard steel sprockets utilize a black-oxide coating for added corrosion protection, they are also manufactured from a premium high-strength grade of mild steel for an additional increase in sprocket life.
 

Product Parameters

 

Sprocket Size Type Tooth Count Outside Diameter Stock Bore Recommend Max. Bore Hub Diameter Length Thru Bore Weight (LBS)
80C11 11 C 4.571 1” 1-5/8″ 2-29/32” 2-3/8″ 3.87
80C12 12 C 4.330 1” 1-7/8″ 3-1/8” 2-3/8″ 4.31
80C13 13 C 4.660 1” 2″ 3-1/64” 2-3/8″ 5.32
80C14 14 C 4.980 1” 2-1/4″ 3-11/32” 2-3/8″ 6.44
80C15 15 C 5.300 1” 2-1/2″ 3-13/16” 2-3/8″ 7.75
80C16 16 C 5.630 1” 2-3/4″ 4” 2-3/8″ 8.81
80C70 70 C 22.870 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 75.7
80C72 72 C 23.500 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 81.4
80C76 76 C 24.780 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 87.8
80C80 80 C 26.050 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 89.9
80C84 84 C 27.330 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 99.2
80C90 90 C 29.240 1-1/2″ 4-1/4″ 6-1/4″ 31/2″ 106.0
80C96 96 C 31.150 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 117.0
80C112 112 C 36.240 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 154.0

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?

When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:

  • Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
  • Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
  • Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
  • Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
  • Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
  • Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
  • Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.

It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.

Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.

ladder sprocket

Can Ladder Sprockets be Used in Material Handling and Logistics Applications?

Yes, ladder sprockets can be used in material handling and logistics applications, and they play a crucial role in various conveyor systems used for material transportation and distribution. Ladder sprockets are well-suited for these applications due to their design and load-carrying capacity. Here’s how ladder sprockets are utilized in material handling and logistics:

  • Conveyor Systems: Ladder sprockets are commonly used in conveyor systems to drive and guide the conveyor chain or belt. These systems efficiently move materials along assembly lines, warehouses, distribution centers, and other logistics facilities.
  • Heavy Loads: Material handling and logistics applications often involve the transportation of heavy loads. Ladder sprockets, especially those made from durable materials like steel, can handle the high loads and provide reliable power transmission.
  • Precision and Efficiency: Ladder sprockets, when correctly sized and aligned, offer precise motion control and efficient power transmission. They ensure that materials are transported smoothly and accurately along the conveyor path.
  • Customization: In material handling systems with specific requirements, ladder sprockets can be customized to fit unique conveyor configurations, load-carrying needs, and environmental conditions.
  • Various Industries: Material handling and logistics applications are found in diverse industries, including manufacturing, automotive, e-commerce, food and beverage, pharmaceuticals, and more. Ladder sprockets are adaptable and commonly employed in these sectors.
  • Speed and Throughput: Ladder sprockets, combined with appropriate conveyor designs, can accommodate different speeds and throughput rates, allowing efficient handling of materials in high-volume environments.

It is essential to select ladder sprockets that meet the specific requirements of material handling and logistics applications. Factors such as load capacity, conveyor speed, operating environment, and material compatibility must be considered when choosing ladder sprockets for these systems.

Regular maintenance and inspection are vital to ensure the smooth operation of ladder sprockets in material handling and logistics applications. Proper lubrication, alignment, and timely replacement of worn or damaged sprockets are necessary to maintain the conveyor system’s efficiency and prevent unexpected downtime.

Overall, ladder sprockets are valuable components in material handling and logistics, contributing to the seamless flow of materials, optimizing productivity, and supporting the efficiency of various industries.

ladder sprocket

What are the Common Applications of Ladder Sprockets in Various Industries?

Ladder sprockets find a variety of applications in different industries where precise motion control, low noise, and high-speed operation are essential. Some common applications of ladder sprockets include:

  • Conveyor Systems: Ladder sprockets are widely used in conveyor systems, especially in high-speed conveyors. They ensure smooth and stable motion of the conveyor chain, minimizing chain slippage and maintaining accurate material handling.
  • Material Handling: In material handling equipment, such as bucket elevators, ladder sprockets provide reliable power transmission and guidance for the lifting and conveying of bulk materials.
  • Automated Assembly Lines: Ladder sprockets are employed in automated assembly lines to precisely control the movement of components or products during the manufacturing process.
  • Robotic Systems: In robotics and automated guided vehicles (AGVs), ladder sprockets are used to control the movement of robotic arms or wheels with high precision.
  • Food and Beverage Industry: Ladder sprockets are utilized in the food and beverage industry, particularly in conveyor systems for packaging, sorting, and transporting food products.
  • Printing and Packaging: In printing machines and packaging equipment, ladder sprockets facilitate accurate movement and synchronization of materials and products.
  • Textile Industry: Ladder sprockets play a role in textile machinery for the controlled movement of fabrics and threads during weaving, knitting, and other processes.
  • Agriculture: Ladder sprockets are used in agricultural equipment, such as harvesters and grain elevators, for handling and transporting crops.
  • Mining and Construction: In heavy machinery used in mining and construction, ladder sprockets contribute to reliable power transmission and precise motion control in conveyor and material handling systems.

The versatility and advantages of ladder sprockets make them suitable for a wide range of industrial applications. Their ability to guide and support the chain while minimizing noise and vibration makes them particularly valuable in industries where operational efficiency and safety are paramount.

When considering the use of ladder sprockets in specific industries, it is essential to understand the application requirements and consult with experts to ensure the correct selection and integration for optimal performance.

China Custom #80 C-Hub Roller Chain Sprocket ANSI Certified Standard  China Custom #80 C-Hub Roller Chain Sprocket ANSI Certified Standard
editor by CX 2023-08-11

China manufacturer #80 C-Hub Roller Chain Sprocket ANSI Certified Standard

Product Description

Product Description

80 Chain Sprockets are manufactured in accordance with ANSI B29.1 Standards and are made for 1″ pitch 80 and heavy-duty 80H roller chains. Being manufactured to The American National Standards Institutes dimensions means that these sprockets directly interchange with other manufacturers. Up to 30-teeth, our 80 sprockets feature hardened teeth for a dynamic performance factor increase and increased sprocket longevity. Out standard steel sprockets utilize a black-oxide coating for added corrosion protection, they are also manufactured from a premium high-strength grade of mild steel for an additional increase in sprocket life.
 

Product Parameters

 

Sprocket Size Type Tooth Count Outside Diameter Stock Bore Recommend Max. Bore Hub Diameter Length Thru Bore Weight (LBS)
80C11 11 C 4.571 1” 1-5/8″ 2-29/32” 2-3/8″ 3.87
80C12 12 C 4.330 1” 1-7/8″ 3-1/8” 2-3/8″ 4.31
80C13 13 C 4.660 1” 2″ 3-1/64” 2-3/8″ 5.32
80C14 14 C 4.980 1” 2-1/4″ 3-11/32” 2-3/8″ 6.44
80C15 15 C 5.300 1” 2-1/2″ 3-13/16” 2-3/8″ 7.75
80C16 16 C 5.630 1” 2-3/4″ 4” 2-3/8″ 8.81
80C70 70 C 22.870 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 75.7
80C72 72 C 23.500 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 81.4
80C76 76 C 24.780 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 87.8
80C80 80 C 26.050 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 89.9
80C84 84 C 27.330 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 99.2
80C90 90 C 29.240 1-1/2″ 4-1/4″ 6-1/4″ 31/2″ 106.0
80C96 96 C 31.150 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 117.0
80C112 112 C 36.240 1-1/2″ 4-1/4″ 6-1/4″ 3-1/2″ 154.0

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
 

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

ladder sprocket

What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?

When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:

  • Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
  • Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
  • Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
  • Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
  • Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
  • Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
  • Industry Standards: Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.

It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.

Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.

ladder sprocket

Can Ladder Sprockets be Used in Material Handling and Logistics Applications?

Yes, ladder sprockets can be used in material handling and logistics applications, and they play a crucial role in various conveyor systems used for material transportation and distribution. Ladder sprockets are well-suited for these applications due to their design and load-carrying capacity. Here’s how ladder sprockets are utilized in material handling and logistics:

  • Conveyor Systems: Ladder sprockets are commonly used in conveyor systems to drive and guide the conveyor chain or belt. These systems efficiently move materials along assembly lines, warehouses, distribution centers, and other logistics facilities.
  • Heavy Loads: Material handling and logistics applications often involve the transportation of heavy loads. Ladder sprockets, especially those made from durable materials like steel, can handle the high loads and provide reliable power transmission.
  • Precision and Efficiency: Ladder sprockets, when correctly sized and aligned, offer precise motion control and efficient power transmission. They ensure that materials are transported smoothly and accurately along the conveyor path.
  • Customization: In material handling systems with specific requirements, ladder sprockets can be customized to fit unique conveyor configurations, load-carrying needs, and environmental conditions.
  • Various Industries: Material handling and logistics applications are found in diverse industries, including manufacturing, automotive, e-commerce, food and beverage, pharmaceuticals, and more. Ladder sprockets are adaptable and commonly employed in these sectors.
  • Speed and Throughput: Ladder sprockets, combined with appropriate conveyor designs, can accommodate different speeds and throughput rates, allowing efficient handling of materials in high-volume environments.

It is essential to select ladder sprockets that meet the specific requirements of material handling and logistics applications. Factors such as load capacity, conveyor speed, operating environment, and material compatibility must be considered when choosing ladder sprockets for these systems.

Regular maintenance and inspection are vital to ensure the smooth operation of ladder sprockets in material handling and logistics applications. Proper lubrication, alignment, and timely replacement of worn or damaged sprockets are necessary to maintain the conveyor system’s efficiency and prevent unexpected downtime.

Overall, ladder sprockets are valuable components in material handling and logistics, contributing to the seamless flow of materials, optimizing productivity, and supporting the efficiency of various industries.

ladder sprocket

What are the Advantages of Using Ladder Sprockets over Other Sprocket Designs?

Ladder sprockets offer several advantages over other sprocket designs, making them a preferred choice in certain applications where specific benefits are required. Here are the advantages of using ladder sprockets:

  • Continuous Chain Support: Ladder sprockets provide continuous support to the conveyor chain or belt. The chain links rest securely within the gaps of the ladder sprocket, ensuring reliable engagement and reducing the risk of chain derailment or slippage.
  • Smooth and Quiet Operation: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration during operation. This makes ladder sprockets suitable for applications where noise reduction is important.
  • High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems due to their ability to maintain chain stability and accurate motion even at elevated speeds.
  • Precise Motion Control: The ladder sprocket’s design provides continuous support and guidance to the chain, ensuring accurate positioning and minimizing chain whip or slack. This is crucial for applications that require precise motion control.
  • Low Maintenance: Due to the reduced chain wear and improved engagement, ladder sprockets may require less frequent maintenance compared to other sprocket designs, leading to lower overall maintenance costs.
  • Compatibility: Ladder sprockets are compatible with various chain types, providing flexibility in conveyor system design and offering options for different industrial applications.
  • Reduced Chain Wear: The continuous support and guidance provided by ladder sprockets result in reduced chain wear, extending the service life of the conveyor chain and sprocket.
  • Prevents Chain Jumping: The ladder sprocket’s design prevents chain jumping or skipping, ensuring continuous and reliable power transmission between the sprocket and the conveyor chain.
  • Enhanced Safety: With reduced chain slippage and improved engagement, ladder sprockets contribute to a safer conveyor system operation, minimizing the risk of unexpected failures.

It’s important to note that ladder sprockets may not be suitable for all applications, and the choice of sprocket design depends on specific requirements and operating conditions. Traditional toothed sprockets or other specialized sprocket designs may be more appropriate in certain scenarios.

When considering the use of ladder sprockets, it is essential to assess the application needs, conveyor system requirements, and consult with experts to make an informed decision for optimal performance and efficiency.

China manufacturer #80 C-Hub Roller Chain Sprocket ANSI Certified Standard  China manufacturer #80 C-Hub Roller Chain Sprocket ANSI Certified Standard
editor by CX 2023-08-09

China OEM Standard Heavy Duty Plastic Sprocket for Conveyor Belt Sprocket Wheel sprocket auto

Product Description

Product Discription

Packaging & Delivery
Packaging Details        Carton or Wooden Box
Delivery Time                5-7 working days

Company Information

Related Products

Exhibition 

 

Material Capabilities: Plastic
Type: Conveyor
Color: Black,White
Usage: Transportation and Widely Usage
Mat: Plastic
Bearing: Strong
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China OEM Standard Heavy Duty Plastic Sprocket for Conveyor Belt Sprocket Wheel     sprocket autoChina OEM Standard Heavy Duty Plastic Sprocket for Conveyor Belt Sprocket Wheel     sprocket auto
editor by CX 2023-07-11