产品描述
Food Grade Stainless steel ladder belt
Product Introduction: Ladder belt is also called chocolate conveyor belt. It is made by assembling the successively bent wires. Usually, customer uses stainless steel 302 wire or called music wire.
The belt is also available in metric pitch. Complete line of sprocket, blanks, shafts, turn belts, and complete conveyor unit.
Light weight&open construction makes this belt popular in baking and food processing. Positive driven belting manufactured from 302 stainless steel or music wire.
Specification for Stainless steel ladder belt:
| 类型 | Wire diameter | Strands/foot | Pitch | Open area | Belt load / square feet (max) | Belt edge |
| RNCB-1 | 0.035″ | 72 | 1/8″ | 77% | 5 pounds | Single / double loop edge |
| RNCB-2 | 0.05″ | 72 | 1/8″ | 67.5% | 1.5 pounds | Single loop edge |
| RNCB-3 | 0.035″ | 53 | 1/4″ | 82.5% | 0.35 pound | Single / double loop edge |
| RNCB-4 | 0.05″ | 27 | 1/2″ | 86% | 0.75 pound | Single / double loop edge |
| RNCB-5 | 0.05″ | 48 | 1/4″ | 77.5% | 1 pound | Single / double loop edge |
| RNCB-6 | 0.05″ | 42 | 3/8″ | 80% | 1 pound | Single / double / C-shaped loop edge |
| RNCB-7 | 0.062″ | 42 | 3/8″ | 75% | 2.25 pound | Single / C-shaped loop edge |
| RNCB-8 | 0.082″ | 32 | 3/8″ | 75% | 10 pounds | Single / C-shaped loop edge |
| RNCB-9 | 0.072″ | 24 | 1/2″ | 82% | 6 pounds | Single / C-shaped loop edge |
| RNCB-10 | 0.092″ | 24 | 1/2″ | 78% | 10 pounds | Single / C-shaped loop edge |
| RNCB-11 | 0.092″ | 15 | 3/4″ | 85% | 8 pounds | Single / C-shaped loop edge |
| RNCB-12 | 0.062″ | 42 | 3/8″ | 71% | 3.5 pounds | Single / C-shaped loop edge |
| RNCB-13 | 0.082″ | 32 | 3/8″ | 67% | 15 pounds | Single / C-shaped loop edge |
| RNCB-14 | 0.072″ | 24 | 1/2″ | 74% | 13.8 pounds | Single / C-shaped loop edge |
| RNCB-15 | 0.072″ | 32 | 3/8″ | 71% | 15 pounds | Single / C-shaped loop edge |
Ladder Belt Required Datas:
1. Wire Diameter
2. Number of Spaces(Does not contain end loops.)
3. Wire Pitch
4. Edge Type: single loop or double loop
5. Belt Width
6. Material
应用： widely used in the electronics industry, the solidification of the circuit board, CZPT fusion, drying, reflow soldering. Cap industry of plastic drying; for chocolate, biscuits, fish baked, frozen and dry, with B network edge can be used in food industry chain drive
Looking for ideal Enrober Conveyor Belt Manufacturer & supplier ? We has a wide selection at great prices to help you get creative. All the Wire Mesh Ladder Belt are quality guaranteed. We are China CZPT Factory of Loop Wire Belt. If you have any question, please feel free to contact us.
| 类型： | NN500 |
|---|---|
| 材料： | Metal |
| 内衬材料： | 钢 |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant |
| 抗拉强度： | 强的 |
| Sample for Ladder Belt: | Free |
| 示例： | US$ 30/件 1 件（最低订购量） | |
|---|
| 定制化： | 可用的 | 定制请求 |
|---|
What are the Cost Considerations of Using Ladder Sprockets Compared to Other Designs?
When evaluating the cost considerations of using ladder sprockets compared to other sprocket designs, several factors should be taken into account. Here are the key cost considerations:
- Initial Investment: The initial cost of ladder sprockets may vary depending on the size, material, and customizations required. In some cases, ladder sprockets can be competitively priced compared to other sprocket designs, while in others, specialized or high-load ladder sprockets may require a higher initial investment.
- Maintenance Costs: Ladder sprockets’ continuous chain support and reduced wear on the chain can lead to lower maintenance costs over time compared to other sprocket designs. Properly maintained ladder sprockets may have longer service life, reducing the need for frequent replacements and associated downtime costs.
- Conveyor System Efficiency: The improved chain engagement and reduced chain wear offered by ladder sprockets can positively impact the overall efficiency of the conveyor system. Enhanced efficiency may lead to increased productivity and cost savings in the long run.
- Energy Efficiency: Ladder sprockets’ smoother motion and reduced friction contribute to improved energy efficiency in conveyor operation. Energy savings can lead to cost reductions in electricity or power consumption.
- Application-Specific Benefits: Depending on the application’s needs, ladder sprockets may provide specific benefits that other sprocket designs cannot match. For example, ladder sprockets are often preferred in high-speed applications or industries where noise reduction is critical, which can add value and justify the cost difference.
- Customization Costs: The degree of customization required for ladder sprockets can influence the cost. Customized ladder sprockets tailored to specific conveyor configurations or operating conditions may have additional costs associated with design and production.
- 行业标准： Depending on the industry and application requirements, certain sprocket designs might be mandated or preferred due to compliance with industry standards. In such cases, the cost considerations should also account for meeting these standards.
It’s important to conduct a comprehensive cost-benefit analysis when choosing between ladder sprockets and other sprocket designs. Consider the initial investment, long-term maintenance costs, conveyor system efficiency, and any specific advantages or disadvantages offered by each design.
Additionally, consult with conveyor system experts and sprocket manufacturers to gain insights into the total cost of ownership for different sprocket options and make an informed decision based on the specific needs and budget constraints of your industrial operation.
不同梯形链轮配置的承载能力是多少？
梯形链轮的承载能力取决于其设计、材料和尺寸。在确定梯形链轮配置的承载能力时，必须考虑以下几个因素：
- 材料： 梯形链轮的材质对其承载能力有显著影响。钢制链轮以其高强度和高承载能力而闻名，而高强度工程塑料则适用于较轻的负载和特定的食品加工应用。
- 牙齿的大小和数量： 一般来说，齿数较多的梯形链轮与链条的接触面积更大，能够更均匀地分散载荷，从而提高承载能力。直径较大的链轮由于接触面积更大，也能承受更高的载荷。
- 中心配置： 梯形链轮的轮毂结构会影响其承载能力。与采用标准或轻型轮毂的链轮相比，采用坚固耐用轮毂的链轮可以承受更高的负载。
- 定制化： 某些梯形链轮可以进行定制，以提高其在特定应用中的承载能力。可以通过定制设计修改、增加支撑结构或使用更高强度的材料来满足重载要求。
- 应用和环境： The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
- 行业标准： Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.
It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.
定期维护和检查梯形链轮至关重要，以便及时发现可能影响承载能力的磨损或损坏迹象。通过选择合适的梯形链轮配置并确保适当的维护，您可以优化输送系统的承载能力和可靠性。
How does a Ladder Sprocket Interact with the Conveyor Chain or Belt?
A ladder sprocket interacts with the conveyor chain or belt in a unique and precise manner, providing continuous support and guidance to facilitate smooth and reliable motion in conveyor systems. Here’s how a ladder sprocket interacts with the chain or belt:
- Continuous Support: The ladder sprocket’s design consists of two parallel plates or bars connected by cross members, resembling a ladder. The chain links rest securely within the gaps between the cross members, providing continuous support throughout the sprocket’s rotation.
- Engagement of Chain Links: As the conveyor chain moves along the conveyor path, it wraps around the ladder sprocket. The chain links fit into the gaps between the cross members, ensuring each link is held securely within the ladder sprocket’s structure.
- Guidance: The ladder sprocket acts as a guide for the conveyor chain, preventing the chain from derailing or skipping off the sprocket during operation. The chain links remain confined within the cross members, maintaining correct alignment with the sprocket teeth.
- Preventing Slippage: The ladder sprocket’s continuous support of each chain link minimizes chain slippage, ensuring accurate power transmission between the sprocket and the conveyor chain.
- Accurate Motion: The ladder sprocket’s design provides consistent positioning and tension on the chain, contributing to smooth and precise motion. This is crucial for conveyor systems that require accurate material handling.
- Reduced Noise and Vibration: The secure engagement of the chain links within the ladder sprocket results in reduced noise and vibration levels during operation, promoting a quieter and more stable conveyor system.
- High-Speed Applications: Ladder sprockets are commonly used in high-speed conveyor systems, as they can maintain chain stability and precise motion even at elevated speeds.
The interaction between the ladder sprocket and the conveyor chain or belt ensures that the chain remains properly engaged with the sprocket teeth throughout its movement. The ladder sprocket’s continuous support and guidance contribute to smooth material flow, reduced wear, and enhanced overall conveyor system performance.
When incorporating ladder sprockets in conveyor systems, it is vital to ensure proper sprocket and chain alignment, adequate lubrication, and periodic maintenance to maximize the system’s efficiency and longevity.
editor by CX 2023-09-21