وصف المنتج
Vessel Marine Accommodation Ladder Winch Marine Single Drum Diesel Engine Driven Winch
Marine hydraulic winch is usually with heavy rated load and widely applied on ship, on the dock or on the offshore platforms for lifting, pulling, towing, mooring etc. It is welcomed by customers especially for heavy-duty marine work and operations. There are built-in hydraulic winch, exposed hydraulic winch, high speed hydraulic winch and low speed hydraulic winch.
| Model | Rated load | Rated speed | Rope capacity | Rope diameter | Motor power | Overall Dimensions |
| KN | m/min | m | mm | KW | mm | |
| YT1-16 | 160 | 7.5 | 500 | 28 | 45 | 3200x4050x2200 |
| YT1-20 | 200 | 7.5 | 500 | 30 | 55 | 3200x4050x2200 |
| YT1-25 | 250 | 7.5 | 550 | 32 | 75 | 3600x4350x2580 |
| YT1-32 | 320 | 7.5 | 600 | 36 | 90 | 3600x4500x2600 |
| YT1-40 | 400 | 5 | 750 | 40 | 90 | 3700x4800x2860 |
| YT1-50 | 500 | 5 | 750 | 52 | 110 | 3900x4900x3000 |
| YT1-63 | 630 | 5 | 850 | 54 | 110 | 4000x5100x3100 |
| YT1-80 | 800 | 5 | 1000 | 58 | 132 | 4250x5300x3300 |
| YT1-100 | 1000 | 5 | 1000 | 64 | 180 | 4550x5500x3450 |
| YT1-125 | 1250 | 5 | 1200 | 70 | 220 | 4850x5800x3700 |
| YT1-130 | 1300 | 5 | 1200 | 72 | 220 | 5000x6800x3800 |
| YT1-160 | 1600 | 4 | 1500 | 82 | 220 | 5200x7000x3860 |
| YT1-200 | 2000 | 4 | 1500 | 90 | 250 | 5350x7200x4000 |
| YT1-250 | 2500 | 4 | 1500 | 102 | 300 | 5500x7450x4200 |
| YT1-300 | 3000 | 4 | 1500 | 110 | 360 | 5800x7600x4200 |
1)Compact costruction, safe & easy operation.
2) Hydraulic Anchor Winch with double drums in waterfall Specifications Details Hydraulic Mooring Winch with double drums in waterfall It consists of a hydraulic motor,spur gears with cover, 3 main shafts , 2 drums, ratchet wheel and detent, etc. Feature Double drums in waterfall. Two drums can work simultaneously and independently. Each Drum’s load 90T (1st layer) Nominal speed 90T X 5m/min(High speed, Winch control Local control & Remote control including amplifier and joystick Brake Hydraulic operated band brake (normally shut) Clutch Hydraulic claw clutch Power Two units 90T double drums winch share 1 hydraulic power unit placed in a room with doors. Two winches drums can work simultaneously and independently.
The main components of the winch include: hydraulic motor (low speed or high speed motor), hydraulic NC multi-plate brake, gearbox, clutch (optional), drum ( single drum or double drum), support shaft, frame spooling device (optional) etc. The winch motor has high mechanical efficiency. The brakes and gearbox are installed in the winch drum, and the drum, support shaft and frame are designed in accordance with mechanical requirements, which makes the overall structure simple and reasonable with sufficient strength and rigidity.
Features Of Marine Hydraulic Winch
In structure: the winch structure is compact, and it has nice appearance with small volume and light weight, etc.;
In function: the hydraulic winches have high safety and efficiency, large starting torque, good stability with low speed, low noise, reliable operation etc;
In application: the marine hydraulic winches can be used on ship deck, in port, on offshore platforms and so on. They can be used for anchoring, mooring, towing and other marine operations, to meet different work requirements, there are marine hydraulic towing winch, hydraulic anchor winch and hydraulic mooring winch supplied by us.
| خدمة ما بعد البيع: | Give The Solution Within 6 Hours |
|---|---|
| Warranty: | 1 Year |
| يكتب: | Hydraulic Windlass |
| Driven Type: | Hydraulic |
| Speed: | Slow |
| Carrying Capacity: | Special Weight Level |
| التخصيص: |
متاح
| طلب مخصص |
|---|
كيف يمكنني منع تآكل وتلف عجلات السلم أثناء تشغيل الناقل؟
يُعدّ منع تآكل وتلف عجلات السلم أثناء تشغيل الناقل أمرًا بالغ الأهمية لضمان عمرها الطويل والحفاظ على كفاءة نظام النقل ككل. فيما يلي بعض الإجراءات الوقائية التي يجب اتباعها:
- التشحيم المناسب: قم بتطبيق مادة التشحيم المناسبة على تروس السلم وسلسلة النقل بانتظام. يقلل التشحيم من الاحتكاك بين أسنان التروس وحلقات السلسلة، مما يقلل من التآكل ويطيل عمر التروس.
- شد السلسلة: حافظ على الشد الصحيح في سلسلة النقل. يمنع الشد المناسب الإجهاد الزائد على عجلات السلم وحلقات السلسلة، مما يقلل من التآكل ويمنع التلف المبكر.
- محاذاة السلسلة: تأكد من محاذاة سلسلة النقل بشكل صحيح مع عجلة السلم. قد يؤدي عدم المحاذاة إلى تآكل غير متساوٍ لأسنان العجلة وحلقات السلسلة، مما يؤدي إلى تسارع التآكل واحتمالية حدوث تلف.
- نظافة: حافظ على نظافة تروس السلم والمنطقة المحيطة بها من الحطام والأوساخ والملوثات. فالجسيمات الغريبة قد تتسبب في انحشار السلسلة، وتسارع التآكل، والتأثير على أداء التروس.
- الفحص الدوري: قم بإجراء فحوصات بصرية دورية لعجلات السلم للتحقق من وجود علامات تآكل أو تلف أو تشوه. يتيح الكشف المبكر عن المشكلات إجراء الصيانة في الوقت المناسب ويمنع حدوث المزيد من التلف.
- استبدال التروس البالية: راقب حالة أسنان ترس السلم بانتظام. إذا ظهرت على أسنان الترس علامات تآكل أو تشقق أو تشوه ملحوظة، فاستبدل الترس فوراً لمنع المزيد من الضرر لسلسلة النقل.
- فحص تآكل السلسلة: افحص سلسلة الناقل بانتظام بحثًا عن علامات التآكل أو التمدد أو الاستطالة. قد يؤدي تآكل السلسلة إلى تسريع تآكل التروس، لذا استبدل السلسلة إذا تجاوزت عمرها الافتراضي الموصى به.
- سعة التحميل: تأكد من أن عجلات السلم مناسبة الحجم والقدرات لتحمل حمولة نظام النقل. استخدام عجلات صغيرة جدًا أو غير مصممة للاستخدامات الشاقة قد يؤدي إلى تآكلها المبكر وتعطلها.
- اتبع إرشادات الشركة المصنعة: التزم بتوصيات الشركة المصنعة لتروس السلم فيما يتعلق بالصيانة وفترات الخدمة. قد توفر الشركات المصنعة إرشادات محددة بشأن التشحيم والشد والفحص لتحسين أداء التروس وإطالة عمرها.
باتباع هذه الإجراءات الوقائية، يمكنك تقليل تآكل وتلف عجلات السلم، وإطالة عمرها الافتراضي، والحفاظ على نظام نقل موثوق وفعال. تُعد الصيانة والتفتيشات الدورية ضرورية لتحديد أي مشكلات محتملة ومعالجتها مبكرًا، مما يمنع توقف العمل المكلف ويضمن التشغيل السلس لنظام النقل.
What are the Load-Carrying Capacities of Different Ladder Sprocket Configurations?
The load-carrying capacity of ladder sprockets varies depending on their design, material, and size. It is essential to consider several factors when determining the load-carrying capacity of a ladder sprocket configuration:
- مادة: The material used in the construction of the ladder sprocket significantly influences its load-carrying capacity. Steel sprockets are known for their high strength and load-bearing capabilities, while high-strength engineering plastics are suitable for lighter loads and specific food processing applications.
- Size and Number of Teeth: Generally, ladder sprockets with more teeth provide a larger contact area with the chain, distributing the load more evenly and increasing the load-carrying capacity. Larger sprockets, with bigger diameters, can also handle higher loads due to their increased surface area.
- Hub Configuration: The hub configuration of the ladder sprocket can affect its load-carrying capacity. Sprockets with robust and sturdy hubs can handle higher loads compared to sprockets with standard or lightweight hubs.
- التخصيص: Some ladder sprockets can be customized to enhance their load-carrying capacity for specific applications. Custom design modifications, additional support structures, or higher-strength materials can be employed to meet heavy-duty requirements.
- Application and Environment: The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
- Industry Standards: Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.
It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.
Regular maintenance and inspection of the ladder sprockets are essential to identify signs of wear or damage that can affect the load-carrying capacity. By selecting the right ladder sprocket configuration and ensuring proper maintenance, you can optimize the load-carrying capacity and reliability of your conveyor system.
Can you Explain the Working Principle of a Ladder Sprocket in a Conveyor System?
In a conveyor system, a ladder sprocket operates based on the principle of guiding and supporting the conveyor chain to ensure smooth and reliable motion. Here’s a detailed explanation of the working principle:
- Design and Structure: A ladder sprocket consists of two parallel plates or bars connected by cross members. The cross members have gaps between them, allowing the chain links to rest securely within the gaps.
- Chain Engagement: The conveyor chain moves along the conveyor path and wraps around the ladder sprocket. As the chain travels, the chain links fit into the gaps between the cross members, resulting in continuous support and engagement of the chain with the sprocket.
- Guiding the Chain: The ladder sprocket guides the conveyor chain, preventing it from derailing or skipping during operation. The chain links are confined within the cross members, which helps maintain the chain’s correct alignment with the sprocket teeth.
- Preventing Chain Slippage: The ladder sprocket’s design ensures that each chain link is securely held within the cross members. This prevents chain slippage and ensures accurate and consistent power transmission between the sprocket and the conveyor chain.
- Smooth Motion: The ladder sprocket’s continuous support of the chain links provides smooth motion without significant chain whip or slack. This is crucial for conveyor systems that require precise and consistent movement of materials.
- ضوضاء واهتزاز منخفضان: Due to the chain’s secure engagement and reduced slippage, a ladder sprocket contributes to low noise and vibration levels in the conveyor system, making it suitable for applications where noise reduction is important.
- تطبيقات عالية السرعة: Ladder sprockets are commonly used in high-speed conveyor systems, ensuring stable and accurate motion of the chain even at elevated speeds.
Overall, the working principle of a ladder sprocket in a conveyor system revolves around guiding, supporting, and engaging the conveyor chain to facilitate smooth and reliable material handling. The ladder sprocket’s unique design provides advantages in certain applications where precise motion control, low noise, and high-speed operation are essential.
When incorporating ladder sprockets into conveyor systems, it is crucial to ensure the proper selection and alignment of the sprocket with the chain to achieve optimal performance and longevity of both the sprocket and the conveyor system.
editor by CX 2023-10-25
