제품 설명
ISUZU Automatic End tipper off loading cold truck harmless animal refeer truck 5ton dead animal refrigerated truck with disinfection function
*
*100% new condition by manufacturer direct sale*
*100% quality guaranteed*
» I. Refrigerator Truck DETAIL
In order to overcome the shortcomings of ordinary fence transport vehicles and prevent the breeding of bacteria and the spread of diseases to a great extent, our company has developed a closed constant temperature transport vehicle for dead pigs in the dead CZPT and poultry transport market through professional design. The dead pig transport vehicle is an indispensable special vehicle at present. It mainly collects dead pigs, cattle, sheep and other animals, Transport them to the harmless treatment center to avoid the spread of the epidemic of these dead animals. Once these food substances lose the refrigeration and heat preservation system. Then the food itself will deteriorate, and such food can not be eaten by people. In the process of refrigerated and heat preservation transportation, sometimes the heat preservation vehicle is changed to the refrigerated vehicle when necessary, and can play the role of moistening the intestines because there are many refrigerated and heat preservation plates in these vehicles, which can maximize the role of heat preservation, so as to achieve the role of refrigeration. It can also achieve the purpose of transportation.
» II. Mobile REFRIGERATOR TRUCK Design Schedule
| Special performance description of dead pig transport vehicle:
1. Manufacturing process of the box body: the box body of the dead pig transport vehicle is externally decorated with FRP; The interior is made of stainless steel structure, which is convenient for the sanitation, cleaning and corrosion resistance of the car body. The simultaneous interpreting process is the same as that of the traditional refrigerator car. Animal harmless treatment vehicle is a kind of refrigerated vehicle. It has extremely strict requirements for the sealing of the compartment. At the same time, it also has the functions of disinfection and temperature balance to control the virus during transportation. Our factory has many years of production experience. The vehicles produced by our factory are of high quality. The price of our factory is lower than that of other manufacturers. It is a car with high cost performance. The specific configuration is as follows: 1. Ultraviolet sterilization lamp inside the compartment |
» III. The REFRIGERATOR TRUCK SPECIFICATION
(the specification only for reference, different country and different truck brand will have different equipment)
| Specification | |||||
| Vehicle Main Dimensions | (L x W x H)mm | 7815*2330*3620 | |||
| Wheel base (mm) | 4500 | ||||
| Wheel track (front/rear) (mm) | 1845/1796 | ||||
| Approach/Departure angle(°) | 27/21 | ||||
| Weight in KGS | Curb Weight | 4545 | |||
| Loading Capacity | 10000 | ||||
| Max. driving speed(km/h) | 85 | ||||
| Engine | Brand | Yuchai | |||
| Model | YC4E160-33 | ||||
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling with automatic torque motor | ||||
| Horse Power(HP) | 160HP | ||||
| Emission standard | Euro 3 | ||||
| Gearbox | 5 Forwarder+1 Reverse | ||||
| Clutch | Reinforced diaphragm clutch, diameter 430mm | ||||
| Steering Gear | power steering, hydraulic steering with power assistance | ||||
| Fuel tank (L) | 200 | ||||
| Tire | 8.25R20 7pcs with 1 spare | ||||
| Brakes | Service brake: dual circuit compressed air brake Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake |
||||
| Refrigerated Box | |||||
| Features | 1. Strong Fiberglass Inner and Outer Wall, with 8cm Middle Polyfoam Insulation. 2. High Quality Hanxue Refrigerator, Lowest Cooling Temperature negative 18 centi-degree (negative 608 Fahrenheit degree) |
||||
| Dimension | 5980*2305*2100mm | ||||
» IV. Mobile Refrigerator TRUCK Equipment for option
The truck inside equipment can be for option
1.Ventilation slot
2.Meat hook
3.goods shelves
4.Stainless steel meat hook
5.Aluminum alloy meat hook
6.Side door
7.emergency power supply
8.Temperature recorder
9.Drive Route monitor detector
10.Hydraulic tail plate
Plastic windshield curtain
Meat hook guide rail
Movable partition
» V. Mobile Refrigerator TRUCK Workshop for reference
» VI. SHIPPMENT
» VII. ABOUT US
ZheJiang MANTEN AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after serive for life.
(7) Professional sales team which will help you to choose suitable truck.
» VII. FAQ
Why choose us?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has CZPT technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 3000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
Any more information regarding to mobile bar truck, please do not hesitate contact with us!
| 판매 후 서비스: | 24hours on-Line Service |
|---|---|
| Warranty: | 12months |
| Certification: | ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE |
| Payload: | 5ton to 8ton |
| Emission Standard: | Euro 3 |
| Transmission Type: | Manual |
| 맞춤 설정: |
사용 가능
| 맞춤형 요청 |
|---|
How do I Properly Install and Align Ladder Sprockets for Optimal Conveyor Performance?
Proper installation and alignment of ladder sprockets are crucial for ensuring optimal conveyor performance and extending the sprocket’s service life. Here are the steps to follow:
- 1. Pre-Installation Inspection: Before installation, inspect the ladder sprocket for any visible damage, defects, or issues. Ensure that the sprocket is free from debris and contaminants.
- 2. Verify Chain Compatibility: Confirm that the ladder sprocket is compatible with the specific conveyor chain used in the system. The sprocket must match the chain’s pitch and configuration to ensure proper engagement.
- 3. Shaft and Hub Preparation: Prepare the driven shaft by ensuring it is clean, free from damage, and meets the required diameter specifications. If using a hub, ensure it fits securely on the shaft.
- 4. Align Sprocket Position: Position the ladder sprocket on the driven shaft and ensure it is centered and aligned properly. Use alignment tools and measurements to ensure accuracy.
- 5. Set Tension and Slack: Adjust the conveyor chain’s tension to the manufacturer’s recommended specifications. Avoid excessive tension, as it can lead to accelerated wear, and ensure there is a proper amount of slack to accommodate chain movement.
- 6. Check Chain Engagement: Confirm that the conveyor chain properly engages with the ladder sprocket. The chain links should rest securely within the gaps of the ladder sprocket without binding or skipping.
- 7. Verify Chain Wrap Angle: Check that the chain wrap angle around the sprocket is within the manufacturer’s recommended range. Sufficient wrap angle ensures proper power transmission and prevents chain slippage.
- 8. Lubrication: Apply the appropriate lubricant to the ladder sprocket and the conveyor chain according to the manufacturer’s guidelines. Proper lubrication reduces friction and wear.
- 9. Run-in Period: After installation, run the conveyor system without a load for a short period to allow the chain and sprocket to settle and self-adjust. Check for any unusual noises or issues during this run-in period.
- 10. Regular Inspection and Maintenance: Schedule regular inspections of the ladder sprockets and conveyor chain to identify and address any wear or alignment issues promptly. Perform maintenance tasks, such as lubrication and tension adjustments, as recommended by the manufacturer.
Properly installing and aligning ladder sprockets ensures reliable power transmission, reduces wear on the sprocket and chain, and minimizes the risk of unexpected failures. Following manufacturer guidelines and working with experienced conveyor system professionals can help achieve optimal performance and efficiency in your conveyor system.
What are the Load-Carrying Capacities of Different Ladder Sprocket Configurations?
The load-carrying capacity of ladder sprockets varies depending on their design, material, and size. It is essential to consider several factors when determining the load-carrying capacity of a ladder sprocket configuration:
- 재료: The material used in the construction of the ladder sprocket significantly influences its load-carrying capacity. Steel sprockets are known for their high strength and load-bearing capabilities, while high-strength engineering plastics are suitable for lighter loads and specific food processing applications.
- Size and Number of Teeth: Generally, ladder sprockets with more teeth provide a larger contact area with the chain, distributing the load more evenly and increasing the load-carrying capacity. Larger sprockets, with bigger diameters, can also handle higher loads due to their increased surface area.
- Hub Configuration: The hub configuration of the ladder sprocket can affect its load-carrying capacity. Sprockets with robust and sturdy hubs can handle higher loads compared to sprockets with standard or lightweight hubs.
- 맞춤 설정: Some ladder sprockets can be customized to enhance their load-carrying capacity for specific applications. Custom design modifications, additional support structures, or higher-strength materials can be employed to meet heavy-duty requirements.
- Application and Environment: The application and operating environment play a crucial role in determining the load-carrying capacity. Factors such as the conveyed material’s weight, conveyor speed, incline angle, and temperature conditions can impact the load on the sprocket.
- Industry Standards: Certain industries have specific standards and guidelines for ladder sprocket load capacity. Adhering to these standards ensures safe and reliable conveyor operation within the industry’s recommended load limits.
It is essential to consult with sprocket manufacturers and conveyor system experts to determine the appropriate ladder sprocket configuration for your specific load requirements. They can provide valuable insights, perform load calculations, and recommend the most suitable ladder sprocket design based on your application’s unique needs.
Regular maintenance and inspection of the ladder sprockets are essential to identify signs of wear or damage that can affect the load-carrying capacity. By selecting the right ladder sprocket configuration and ensuring proper maintenance, you can optimize the load-carrying capacity and reliability of your conveyor system.
컨베이어 시스템에 적합한 래더 스프로킷의 크기와 피치를 어떻게 선택해야 할까요?
컨베이어 시스템의 원활한 작동, 효율적인 동력 전달 및 장비 수명 연장을 위해서는 적절한 크기와 피치의 래더 스프로킷을 선택하는 것이 매우 중요합니다. 다음은 선택 과정을 안내하는 단계입니다.
- 1. 컨베이어 체인 유형을 식별하십시오: 시스템에 사용되는 컨베이어 체인의 종류를 확인하십시오. 체인 종류에 따라 특정 피치 치수가 있으며, 래더 스프로킷은 체인의 피치와 일치해야 제대로 맞물립니다.
- 2. 스프로킷 톱니 수를 확인합니다. 원하는 컨베이어 속도, 구동축 회전수(RPM) 및 체인의 속도 계수를 기준으로 래더 스프로킷에 필요한 톱니 수를 계산합니다. 속도 계수는 일반적으로 체인 제조업체에서 제공합니다.
- 3. 체인 감김 각도를 고려하십시오: 스프로킷 크기가 체인 이탈을 방지하기 위해 스프로킷 주위로 체인이 충분히 감길 수 있도록 충분한지 확인하십시오. 체인 감김 각도는 제조업체에서 권장하는 범위 내에 있어야 합니다.
- 4. 컨베이어 부하 평가: 컨베이어 시스템의 하중과 체인이 받을 최대 장력을 평가하십시오. 래더 스프로킷의 재질과 설계는 변형이나 파손 없이 하중을 견딜 수 있어야 합니다.
- 5. 축 직경을 측정하십시오. 래더 스프로킷의 내경(내부 구멍)은 구동축의 직경과 일치해야 하며, 그렇지 않을 경우 테이퍼록 부싱이나 스루보어 허브를 사용하여 스프로킷을 축 크기에 맞게 조정해야 합니다.
- 6. 공간 제약을 고려하십시오: 선택한 래더 스프로킷 크기가 컨베이어 시스템의 사용 가능한 공간에 맞고 다른 구성 요소와 간섭하지 않는지 확인하십시오.
- 7. 제조업체 자료를 참조하십시오. 사용 중인 컨베이어 체인 유형에 맞는 스프로킷 크기와 피치 옵션을 찾으려면 래더 스프로킷 제조업체의 데이터 및 사양을 참조하십시오.
- 8. 고품질 소재를 선택하세요: 특히 열악한 환경이나 무거운 하중이 가해지는 용도에는 내마모성과 내구성이 뛰어난 고품질 소재로 제작된 래더 스프로킷을 선택하십시오.
- 9. 전문가의 조언을 구하십시오: 선택 과정에 확신이 서지 않는다면 컨베이어 시스템 전문가나 스프로킷 제조업체에 문의하여 적절한 래더 스프로킷 크기와 피치를 선택하는 데 도움을 받으십시오.
체인 종류, 컨베이어 부하, 스프로킷 톱니 수 및 기타 관련 요소를 신중하게 고려하여 컨베이어 시스템에서 최적의 성능과 안정적인 동력 전달을 보장하는 적절한 크기와 피치의 래더 스프로킷을 선택할 수 있습니다.
editor by CX 2023-11-29
