Produktbeskrivning
China Low price High Speed Ladder type cable tray roll forming machine
cable tray system is used to support insulated electrical cables used for power distribution, control, and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction
cable tray making machines,cable tray roll forming machine,Cable Tray Production Line make different sizes of cable tray, for example cable tray width from 100-800mm, height from 50-200mm. it is easy to change size by moving whole line rollers and cut blade positions.
Process of cable tray forming machines:
decoiler material-leveling-punch-cutting-powered transmission table-forming
Main features of cable forming machines
suitable material thickness 0.8-2.5mm
gearbox move the cable tray lines
roller material CR12 mould
solid shaft diameter 80mm
punch capicity 25T x 2
machine weight about 40 ton
Decoiler
5 Tons hydraulic Decoiler,material width <= 1250mm, inner coil <= 480-520mm,outter diameter coil <= 1500mm.
Material Feeding Xihu (West Lake) Dis.
1. Positioning plate: Adjust the position of both ends to makt it fit the width of the feeding.
2.Xihu (West Lake) Dis. frame: Play a role in supporting the transport of the matrial roll
3. Xihu (West Lake) Dis. roller:The upper and lower round rollers are designed to make the feeding process more smooth.
Leveling Device1.leveling roller upper 5 roller,down 4 rollers
2. Leveling roller diameter: 100mm
3.Material: 40Cr heat treatment, electroplating
4.Motor Power: 7.5kw
5.Leveling speed: 12m/min
Punching Part
1.Hydraulic punching, all holes required for punching profiles at 1 time, adjustable punching row spacing
2.Cylinder: 25ton x 2
3.Hydraulic power: 11kw
4.Die Material:Cr12 Mov heat treatment HRC5-62,Two dies
5. Punching accuracy:+ – 1 mm
6. Type-changing method: the screw rod adjusts the position of the left and right oil cylinders,and the left and right hole row spacing
can be adjusted
Hydraulic pre-cutting
1.Hydraulic front shearing,stop cutting,no waste
2.Cylinder: 15 tons
3.Blade material; Cr12 Heat treatment HRC58-62
powered transmission table
1.Power flat roll, motor drive, screw width adjustment
2.Length 6 mtrs
3.Flat roll size: Φ60mm, 45# steel surface electroplating
4.Motor power: 1.5 kw
Main Roll Forming Mill
1.Automatic continuous roll forming, manual + automatic control, motor drive, stepless adjustment in the range of width 100-800, height 50-200, electric control to adjust the above parameters
2.Forming material: ordinary cold-rolled sheet and galvanized sheet below 350Mpa
3.Working range: feed width 1200mm, material thickness 1.0-2.0mm
4.Roller stations: 26 stations
5.Motor Power:5.5+4 kw
6.Transmission mode: gear, sprocket
7.Shaft Diameter: 80mm,45# steel
8.Roller material: 40Cr heat treatment HRC55-60, hard chrome plating on the surface
9.Forming frame: H400 section steel welded with 25mm table top, the whole is shot blasted and sanded to remove rust. Multi-hole gantry milling machine table and connection port.
10:Wall panel: 25mm thick iron plate, plasma cutting nitrogen cooling to ensure straightness ±1mm, surface shot blasting and sanding to remove rust, 5m CNC gantry milling to process the appearance, bearing holes and bearing slip.
11.Forming Speed:12m/min
12.Adjustment method: The display screen sets the profile parameters, the computer automatically adjusts the distance between the left and right
roll groups, and the motor drives
13:Adjusting motor power: 2.2kw x 2
Product Features
1. More efficient and accurate execution of production orders;
2. High equipment reliability;
3. Little waste of materials and energy;
4. High productivity;
5. High quality materials, get a longer service life;
6. All parts of the machine are processed with precision, and the surface of the roll is chromeplated to ensure that customers can
get qualified products at the same time, it can avoid the scratch of the color steel surface paint, and increase the service life of the roll;
7. Customized coil processing solutions to solve all aspects of technical problems.
Why choose Us?
- We have sold more than 3000 sets roll forming machines to many countries around the world.
- We have hundreds of models about all kinds of roll forming machine for your reference, you could’t worry if you don’t have a profile drawing.We can recommond you some classical models that is common in your country.
- When designing the machine, our considerate service will estimate and avoid the problem that may happen.
- One set machine can provide many solutions with different price level.But they are all the cost-effective.
- We attach importance to many details. Every machine part quality is higher than our competitors in same price level.
| After-sales Service: | Online Support, Free Spare Parts |
|---|---|
| Warranty: | 12 Months |
| Certifiering: | CE, ISO9001 |
| Customized: | Customized |
| Condition: | New |
| Control Type: | CNC |
| Prover: | US$ 110000/Set 1 Set(Min.Order) | |
|---|
| Anpassning: | Tillgänglig | Anpassad förfrågan |
|---|
How do I Prevent Wear and Damage to Ladder Sprockets during Conveyor Operation?
Preventing wear and damage to ladder sprockets during conveyor operation is essential to ensure their longevity and maintain the overall efficiency of the conveyor system. Here are some preventive measures to follow:
- Proper Lubrication: Apply the appropriate lubricant to the ladder sprockets and the conveyor chain regularly. Lubrication reduces friction between the sprocket teeth and the chain links, minimizing wear and prolonging the sprocket’s life.
- Chain Tension: Maintain the correct tension in the conveyor chain. Proper tensioning prevents excessive stress on the ladder sprockets and chain links, reducing wear and preventing premature failure.
- Kedjejustering: Ensure the conveyor chain is correctly aligned with the ladder sprocket. Misalignment can cause uneven wear on the sprocket teeth and chain links, leading to accelerated wear and potential damage.
- Renlighet: Håll stegens kedjehjul och omgivningen rena från skräp, smuts och föroreningar. Främmande partiklar kan orsaka kedjans fastklämning, snabbare slitage och påverka kedjehjulets prestanda.
- Regelbunden inspektion: Conduct regular visual inspections of the ladder sprockets to check for signs of wear, damage, or deformation. Early detection of issues allows for timely maintenance and prevents further damage.
- Byt ut slitna kedjehjul: Monitor the condition of the ladder sprocket teeth regularly. If the sprocket teeth show significant wear, chipping, or deformation, replace the sprocket promptly to prevent further damage to the conveyor chain.
- Kontrollera kedjeslitage: Regularly inspect the conveyor chain for signs of wear, stretching, or elongation. A worn chain can accelerate sprocket wear, so replace the chain if it is beyond its recommended service life.
- Load Capacity: Ensure that the ladder sprockets are appropriately sized and rated for the load capacity of the conveyor system. Using sprockets that are too small or not designed for heavy-duty applications can lead to premature wear and failure.
- Follow Manufacturer’s Guidelines: Adhere to the ladder sprocket manufacturer’s maintenance recommendations and service intervals. Manufacturers may provide specific guidelines for lubrication, tensioning, and inspection to optimize sprocket performance and longevity.
By following these preventive measures, you can minimize wear and damage to ladder sprockets, prolong their service life, and maintain a reliable and efficient conveyor system. Regular maintenance and inspections are essential to identify and address any potential issues early on, preventing costly downtime and ensuring the smooth operation of your conveyor system.
Hur beräknar jag det erforderliga vridmomentet och den erforderliga effekten för en stegedrevuppsättning?
Calculating the required torque and power for a ladder sprocket setup involves considering several factors related to the conveyor system’s design and operation. Here’s a step-by-step guide to the calculation process:
- Identifiera parametrar: Samla in nödvändiga data, inklusive transportbandssystemets specifikationer såsom transportbandets längd, hastighet, kedjedelning, kedjehjulets diameter och det transporterade materialets vikt per längdenhet (om tillämpligt).
- Beräkna kedjespänning: Determine the chain tension in the conveyor system. Chain tension depends on the conveyor’s angle of inclination, the weight of the material being conveyed, and any additional forces acting on the chain.
- Beräkna kedjedragkraft: Kedjedragkraften är den kraft som krävs för att flytta transportörkedjan. Den beräknas genom att multiplicera kedjespänningen med antalet kedjetrådar.
- Beräkna vridmoment: För att beräkna det vridmoment som krävs för steghjulet, multiplicera kedjedragkraften med hjulets radie. Kedjehjulets radie är hälften av hjulets diameter.
- Tänk på effektivitet: Ta hänsyn till transportbandets effektivitet. Det faktiska vridmomentet som krävs kommer att vara högre än det beräknade vridmomentet på grund av effektivitetsförluster i lager, kedjor och andra komponenter.
- Beräkna effekt: To determine the power required for the ladder sprocket setup, multiply the calculated torque by the conveyor’s rotational speed in radians per second. The rotational speed can be obtained by converting the conveyor speed from meters per second to radians per second.
- Tillämpa säkerhetsfaktorer: Tillämpa säkerhetsfaktorer på de beräknade vridmoment- och effektvärdena för att säkerställa att systemet kan hantera tillfälliga toppbelastningar och undvika att systemet körs kontinuerligt med maximal kapacitet.
Keep in mind that these calculations provide an estimate of the required torque and power for the ladder sprocket setup. Actual operating conditions, variations in material properties, and other external factors may influence the results. Additionally, it’s essential to consult conveyor system experts or sprocket manufacturers for further guidance and to verify the accuracy of the calculations.
By accurately calculating the required torque and power, you can ensure that the ladder sprocket setup is appropriately sized to handle the conveyor system’s load and operational demands, leading to efficient and reliable conveyor performance.
Hur väljer jag rätt storlek och stigning på ett stegdrev för mitt transportbandssystem?
Att välja rätt storlek och stigning på ett steghjul för ditt transportbandssystem är avgörande för att säkerställa korrekt drift, effektiv kraftöverföring och förlängd livslängd för utrustningen. Här är stegen som vägleder dig genom urvalsprocessen:
- 1. Identifiera transportbandskedjetyp: Determine the type of conveyor chain used in your system. Different chain types have specific pitch measurements, and the ladder sprocket must match the chain’s pitch to ensure proper engagement.
- 2. Bestämma kedjehjulets kuggantal: Calculate the required number of teeth for the ladder sprocket based on the desired conveyor speed, driven shaft RPM, and the chain’s speed factor. The speed factor is typically provided by the chain manufacturer.
- 3. Beakta kedjelindningsvinkeln: Ensure that the sprocket size allows for sufficient chain wrap around the sprocket to prevent chain disengagement. The chain wrap angle should be within the manufacturer’s recommended range.
- 4. Bedöm transportbandets belastning: Evaluate the conveyor system’s load and the maximum tension the chain will experience. The ladder sprocket’s material and design must be able to handle the load without deformation or failure.
- 5. Bestäm axeldiametern: The ladder sprocket’s bore size (inner hole) should match the driven shaft’s diameter or use a taper-lock bushing or through-bore hub to adapt the sprocket to the shaft size.
- 6. Tänk på utrymmesbegränsningar: Säkerställ att den valda steghjulsstorleken passar inom det tillgängliga utrymmet i transportbandssystemet utan att störa andra komponenter.
- 7. Konsultera tillverkarens data: Refer to the ladder sprocket manufacturer’s data and specifications to find the appropriate sprocket size and pitch options for your specific conveyor chain type.
- 8. Välj högkvalitativa material: Välj ett stegdrev tillverkat av högkvalitativa material som erbjuder god slitstyrka och hållbarhet, särskilt för applikationer med tuffa miljöer eller tunga belastningar.
- 9. Sök expertråd: Om du är osäker på urvalsprocessen, rådfråga experter på transportbandssystem eller kedjehjulstillverkare för hjälp med att välja rätt storlek och stigning för stegkedjehjulet.
Genom att noggrant överväga kedjetyp, transportbandsbelastning, kedjehjulets tänder och andra relevanta faktorer kan du välja lämplig storlek och stigning på ett stegdrev som säkerställer optimal prestanda och pålitlig kraftöverföring i ditt transportbandssystem.
editor by CX 2023-10-08